Search results

The article proposes a method of calculation the load between the rolling bodies of the swinging bearings and the bearings of the traction motor, which makes it possible to have the value of the radial clearance in the bearing, as well as the radial movement of the inner rings relative to the outer one. To determine the load perceived by the most loaded rollers, a solution of the equilibrium equation for internal elements is proposed using simple iterations. The implementation of the method is implemented in the Matlab software package. Using the proposed method, the load distribution between the rollers in the traction motor of the VL11K electric locomotive was calculated. To determine the load acting on the bearing, the “Sarga-Subic” section was selected, which has a mountain profile.

The results of the investigations on the study condition movement of high-speed trains with active and passive systems inclination of body of the carriage in the curved directions of railway track with the registrations of the organizes in the movement and exploitation of the electric trains «Afrosiyob» in the direction Tashkent - Samarkand of the Uzbek railway track are presented are presented.

The results of the investigations on the evaluation of efficiency use of the diesel locomotives UzTE16M4 in the mountainous direction Kumkurgan - Tashguzar of the Uzbek railways track by of the movement goods trains with stops and without any stops on the spaces station are presented.

Based on the analysis of the empty rolling stock on the Krasnoyarsk and East Siberian Railways, the technical parameters that have a significant impact on the unloading of the wheel of the first wheel pair in the course of movement are determined. The design features of wagons influencing the safety coefficient of train traffic are considered. Statistical processing of these gatherings, according to the materials of official investigations, revealed a number of interesting features. One of them is non-normalized total gaps in the sliders along the diagonals of the wagons. This fact in the movement of empty car causes misalignment of the body, which in turn leads to a redistribution of the loads acting on the spring kits on the sides of carts and wagons. The influence of elastic suspension parameters (height, spring break) on the redistribution of loads acting on the sides of the trolley is considered. The misalignment of the body of empty wagons, especially wagons with a sufficiently small mass of unsprung parts and a high center of gravity, leads to a significant reduction in the safety factor. The calculation of the transverse guiding forces acting at the point of contact of the wheel and rail, as well as their effect on the unloading of the wheel. It is revealed that the body skew leads to a significant increase in lateral force, which affects the stability of the empty rolling stock.

Formed research methodology of assessing the impact of pulsed exposure with the one-hundred-Rhone joints of rails on the performance of the dynamic characteristics of the train crew. The dependence of the coefficient of the effect of pulse repetition on the level of energy dissipation in the system and the speed of the crew.

The method of definition of dynamical reactions in mechanical oscillation systems with rigid body with two degrees of freedom is discussed. Understandings about possibilities of creature of structural analogy schemes in relations with systems of automatic feed-back control are used. Transformations of structural schemes for selection of chain of feed-back ties in accordance in examination of object are shown. Such ties represent the dynamical reactions which are looked. Compare analysis with using several approaches are made. Peculiarities of method of definition of dynamical reactions in contacts of rigid body with elastic elements of mechanical oscillation systems are shown.

The work is devoted to the consideration of the possibility of using composite materials with an aluminum matrix in the design of electric transport pantographs. Currently, there is a tendency to increase the speeds of electric transport. This fact requires reliable and high-quality current collection, which can be achieved by reducing the mass of the current collector design, including through the use of composite materials. The possibility of using composite materials in parts and assemblies of current collectors operating under conditions of increased current loads and at high speeds of movement and the mechanical characteristics of the traditional ones used in the carriage design and the composite materials proposed for use are analyzed. The design of a carriage of high-speed electric rolling stock has been developed, in which an aluminum matrix composite material was used as a structural material. Statistical modeling using the finite element method in the SOLIDWORKS Simulation software package was performed. Comparison of the strength characteristics of carriage assemblies made of traditional materials and aluminum matrix composite showed the possibility of reducing their weight in the case of composite use without reducing the strength of structural elements. The static characteristic of the carriage in which the composite material was used coincides with the static characteristic of the carriage made of traditional materials, which confirms the possibility of using an aluminum matrix composite without making significant changes to the carriage design. To evaluate the dynamic characteristics of the composite carriage and its effect on the dynamic characteristics of the pantograph, modeling was carried out using the methods of multibody modeling of SOLIDWORKS Motion. The obtained simulation results indicate an improvement in dynamic characteristics when using composite materials, which has a beneficial effect on the reliability and quality of current collection.