• Рус Русский
  • Eng English (UK)

Quarterly magazine OSTU agencies. Media registration number: ПИ № ФС77-75780 dated May 23, 2019. ISSN: 2220-4245. Subscription index in the official catalog "Subscription publications" of JSC "Russian Post": PP914.
The journal is included in the Russian Science Citation Index and in the List of Russian Scientific Journals .

Search results

  • V.1(17), 2014
    19-25

    Modeling of heating material of the wheel in braking mode of locomotive

    The results of mathematical modeling of the heating process of the wheel material during braking mode of the locomotive are presented in article. The results can be used to calculate the temperature change for any point of the wheel during the braking operation.
  • V.3(15), 2013
    24-29

    Dynamics interaction of contacting bodies

    Results of mathematical modeling of determination of character and the law of change of forces and tension arising in the field of contact of interacting bodies on the example of dynamic contact at impact of an elastic sphere about motionless, absolutely rigid plate are presented in article, at its flat movement. The received results can be used at calculations of contact forces and material tension in a metalwork at shock influences.
  • V.2(42), 2020
    26-34

    Analysis of corrosion process in reinforced concrete structures with strength parameters estimation

    This article contains results of experimental studies on the formation of corrosion products as a result of aggressive environment and electric currents action on the reinforced concrete structures. There are discussed a method of creating models with artificial electrocorrosion under conditions close to real working. The results of testing models using the X-ray method and modeling their strength characteristics are presented.
  • V.4(44), 2020
    37-47

    Coordinate system of control and alerting about hazardous electric potentials during operation and technology of repair of power supply devices jsc «russian railways»

    The state of industrial injuries during operation and repair technology of power supply devices in the power complex of Russian Railways, which confirms the relevance of the development and implementation of methods and technical means of protecting electrical personnel of the power complex of Russian Railways from electrical injury. The analysis of existing methods of maintenance, operation and repair technology of the contact network is carried out. An innovative solution is proposed in the field of electrical safety of personnel of the energy complex of JSC "Russian Railways" through the creation of a single high-precision coordinate space of power supply devices, implemented on the basis of mechanisms for using the global navigation satellite systems GLONASS / GPS.Considered the implementation of power supply and sectioning circuits and main electrical connections in the form of a digital model, which has a mathematical description of the geometric characteristics and spatial position of the contact network; feeding feeders; overhead lines: longitudinal power supply, automatic blocking, centralization and blocking, lines «two wires - rail», lighting; waveguide and other objects of power supply and electrification of railways. On the basis of modeling dangerous situations of electric shock, the electrical personnel of the power complex of JSC «Russian Railways» during the maintenance and repair of overhead contact network devices in all categories of work substantiated the effectiveness of the implementation of a spatial database in the form of a digital model of contact network devices. The use of a digital model of the overhead contact network will increase the level of electrical safety during maintenance and repair of overhead contact network devices and reduce the level of electrical injury to employees of the power complex of Russian Railways.
  • V.4(24), 2015
    39-44

    Analytical capabilities for complex aes spectrometry for the control defects rail track

    The aim of the work, the results of which are presented in this article, is to a study of the impact of physical and mechanical properties of rail steel on the parameters of the spectrum emission. The experimental results were obtained by method of atomic emission spectroscopy (AES) in argon. Performed quantitative analysis material of the rail steel and built a multi-dimensional graduations of the description of the spectral lines correlate with changes in the hardness of steel. The results can be used to extend the capabilities of devices atomic-emission spectral analysis
  • V.4(36), 2018
    53-60

    Mathematical modeling of force fieldsin the elements of a wheel-motor blockelectric series 2es10

    The article presents the results of modeling the force fields in the elements of the wheel-motor unit of the electric locomotive 2ES10. The mathematical model is obtained on the basis of the Lagrange equations of the ΙΙ kind. A design scheme for the study of the dynamic behavior of the wheel-motor unit is presented. Expressions for the deflection of the elastic elements of the traction motor suspension, elastic and dissipative forces are given. A method for determining the vector force field at the articulation site of the bracket and thrust suspension TEM is proposed.
  • V.2(22), 2015
    53-58

    Features current collection in the collector-brush unit traction motors electric locomotives 2es6

    Work collector-brush assembly largely affects the operational reliability of the DC traction motors. The article presents results of the simulation of contact interaction «brush-collector» in the 2ES6 electric locomotive traction motors. Reviewed influence of the design features of the brush holder, conditions and modes of operation on the quality of switching traction motors. On the basis of theoretical and experimental studies offered recommendations to improve the quality of contact «brush-collector» and to ensure the operational reliability of the traction motors.
  • V.1(21), 2015
    54-59

    Investigation of electrostatic field on the insulator strings catenary

    The article describes themain types ofdamageinsulatorscontact network, presents statisticsfortheirfailures. Identified weaknessesin existing methodsof diagnosingsayabout the relevance ofthe problem, especially in the areasof railwaysDC. Made experimental investigationson the measurementof the electrostaticfield on theinsulator strings. Analysis of the studiesshowed that the presencein the string of faultyinsulatorsleadsto an increase inthe electrostatic fieldaround them. Proposed a technicaldevice noncontact measurementof electrostatic fieldandmethod of determining thefaultyinsulatorin the string.
  • V.4(52), 2022
    57-65

    Increasing the technical characteristics of autonomus locomotives by a lithium-ion traction accumulator battery

    The main subject of this article is consideration of the possibility of applying in electric circuit of the diesel locomotive hybrid power sourse, thats consists of diesel internal combustion engine and traction energy storage (li-ion accumulator battery). The main target of this work is to describe the effectiveness of the applying Li-ion energy storage in traction and diesel internal combusion engine start modes. At the same time, the regular used lead-acit battery is excluded from the locomotive circuit and replaced by a traction accumulator battery. By using numerical simulation methods, the article considers the possibility of starting a diesel internal combustion engine with a traction li-ion accumulator battery and possibility of the increasing the torque of electric traction motors and technical characteristics of the locomotive when the li-ion traction accumutalor battery is turned on as an additional source of energy. The relevance of the results is to get data about increasing carrying mass of the train when using a hybvid energy source on a diesel locomotive. The results of the work demonstrate the effectiveness of the use of a traction battery it traction and engine start modes, while improving the performance of the locomotive. The conclusions of the work contain an analysis of the results of mathematical modeling of the use of a traction battery.
  • V.1(37), 2019
    64-72

    Method of remote diagnostics suspended porcelaininsulator dc catenary

    A method for remote diagnosis of suspended porcelain insulators based on the pulse method is proposed. The form of test pulses for diagnosing isolators in the area of the DC contact network is determined. The main diagnostic parameters of the supplied and recorded pulses are given and calculated. The possibility of determining the distance to the faulty garland depending on the amplitude value of the diagnostic pulse has been revealed. The change of the peak value of the pulse decay depending on the resistance of the insulator string is considered. The proposed method allows localizing the position of a faulty insulator string at the DC power supply section, and subsequently reliably determining the faulty insulator in the festoon.
  • V.4(52), 2022
    82-88

    Wear of the material of the locomotive wheel tire fresh

    In this article, the process of wear of the material of the ridge of the wheel brace during the movement of the locomotive in a curve of a given radius is considered. The methodology of the study considered in this article was that, based on the expression for the depth of penetration of the rail head into the material of the bandage ridge, the movement of the wheel along the inner rail in the curve was considered. It was taken into account that the contact point on the ridge of the bandage will move along the edge of the rail with slippage and that the contact area is a fairly narrow surface with a border close to an ellipse. Formulas for calculating the speed and the slip path of the contact point of the ridge of the locomotive wheel brace with the rail are obtained. As a result of the study, equations were derived to estimate such quantities as the volume, intensity and wear rate of the bandage (per revolution of the wheel). It is shown that the expressions obtained as a result of the work carried out can be used to calculate the intensity of wear of the brace ridge when the locomotive is moving in a curve of a given radius. The amount of the ridges material wear of the wheelset bandages can be determined on the basis of the equations obtained individually for a specific locomotive series and a given range of its operation.
  • V.3(51), 2022
    90-98

    Determination of stresses and the depth of mutual penetration of the materials of the rail head and the locomotive wheel tire fresh in the area of their force contact

    Issues related to the wear of the rail and wheel tread of a locomotive are always of great interest to both operational services and scientists. Knowledge of the influence of technical and operational factors on the intensity of wear of the materials of the contacting bodies would save material and financial resources. The proposed article is devoted to determining one of these parameters, namely, the depth of indentation of the material of the rail head into the material of the wheel rim flange. The force interaction of the bandage crest and the rail head occurs mainly at the level of irregularities in the contact area. The wear of the material of the contacting bodies will be determined by the depth of penetration of irregularities in the contact area and the speed of relative slip. An important parameter for assessing the magnitude and nature of wear is the relative penetration depth of the contacting bodies. In this case, the magnitude of the collapse of one of the contacting bodies is equal to the depth of penetration of another body into it. Calculations of the main radii of curvature of the surfaces of the rail head and bandage crest at the point of their contact are made, and the dimensions of the contact area are determined. As a result, expressions were obtained for calculating the depth of mutual penetration of the materials of the shroud crest and the rail head. The rail head material has a deeper penetration into the shroud tongue material. The force contact between the bandage crest and the rail occurs mainly within the limits of plastic deformation of their materials. Formulas are obtained for determining the magnitude of the approach of the contacting bodies and the highest normal stress in the contact zone. An estimate of the values of the collapse of the material of the rail head and the bandage crest was made, which makes it possible to judge the percentage of their wear. With force contact, the wear of the wheel rim flange is much higher than the wear of the rail head.
  • V.3(27), 2016
    91-99

    Modeling and experimental investigation of the distribution of the electrostatic field on a garland suspended porcelain insulators

    The article deals with the distribution of the electrostatic field around the garland of porcelain suspension insulators containing defects. Achieved the distribution simulation of the electrostatic field around insulators in the software package Elcut. We get a picture of field distribution around the insulators for the environment with different dielectric constants. A comparative analysis of simulation results and experimental studies on the basis of which revealed the possibility of diagnosing the parameters of insulators of the electrostatic field.
  • V.4(20), 2014
    92-97

    Comparative analysis of simulation results and experimental data device remote diagnostics insulator contact systems

    The article presents results ofmodeling andfull-scaletesting of the devicefor remotediagnosisinsulatorscatenaryrailway transport. The maincauses ofbreakdownof insulators. Presents statistics offailurecatenaryinsulators. The plotof the contactnetwork is presentedin the form ofthe line modelwith distributed parameters. To create a virtual model of the device and the line was selected program Multisim 12.0. Described bya block diagramof the devicefor remote monitoringcatenaryinsulators. Shows theprinciple of operationof the deviceto control thecatenaryinsulators. Present a schemeof the experimentat the siteof contact networkOSTUlandfill. Parameters are calculatedareaof contact network. Chosenform ofdiagnosingpulsesto determine thepossible location ofthe faultyinsulator.
  • V.1(25), 2016
    96-104

    Minimization of risk when determining the duration of liner-tamping-straightening machines

    The authors propose a model of justification of the duration of the operation liner-tamping-straightening and construction machinery. Using this model, we can evaluate the efficiency and reliability of machines on any object. This allows you to most reliably predict the timing of production of certain types of works and their cost at the design stage. The article presents the indicators of full-scale tests and the estimation of reliability of manufacturing operations. One of the main factors of reliability of work of construction machines is the utilization of their time. All normative documents are obsolete data on the utilization of machines during the working time, which need updating, as the machines are constantly improving. To assess the reliability of working machines, the authors developed a database of the results of field tests liner-tamping-straightening machines, cranes, excavators, bulldozers, pipe layers, drilling rigs and dredges. To prove the validity of database values according to the results of full-scale tests were carried out two stages of verification: logical and mathematical. After sampling in accordance with GOST R 8.736-2011 was verified that it belongs to the law of normal distribution using the criterion of Pearson agreement. It was further calculated the reliability and risk of the planned volume of work in scheduled period of time. When it was considered the utilization ratio of machines time and the risk of deviation from the mean. The proposed approach to the assessment of duration of liner-tamping-straightening and construction machinery can be extended to any type of equipment and will allow to obtain numerical values for evaluating the reliability of production work in the scheduled time, which is very important in the construction, repair and maintenance.
  • V.3(23), 2015
    109-118

    Model performance liner-tamping-straightening machines vpr-02 and vprs-02

    The algorithm of constructing the confidence interval of the model estimating the reliability of liner-tamping-straightening machines. The basis for assessing the reliability of transport-technological process initiated the concept of reliability, as the probability of reaching a liner-tamping-straightening machines ultimate goal in the manufacture of track work. One of the main factors reliability of track machines is the utilization of their time and availability to work. The guidelines are outdated factor data used during the working time that must be updated, as the machines are constantly being improved. According to the results of field testing of the liner-tamping-straightening machines was established database of values of the coefficients of availability and utilization over time. The data base values were recorded, the last two stages of verification: logical and mathematical. In the article the example of constructing a confidence interval values of the coefficient of use of time depending on the complex index of reliability: availability. To create the model formed the sample values from the database. After sampling in accordance with GOST R 8.736-2011 State system for ensuring the uniformity of measurements. The direct measurement repeated. Methods of processing the results of measurements were tested for their adherence to the law of normal distribution using the goodness of fit Pearson. Then built a model of the utilization of time depending on the availability liner-tamping-straightening machines (regression equation) and the confidence interval of the model. The proposed model works liner-tamping-straightening machines allow us to predict the main complex organizational and technological performance of a specific machine at the design stage of technological processes of track work. This method is versatile and can be used to assess the technical reliability of any machine systems, complete sets and individual cars.
  • V.4(44), 2020
    112-119

    Improvement of cleaning of ballast bed railways from oil products by the gradder washer

    Examined the effect of oil pollution on the ballast bed of the railway track, namely, the effect of oil and oil products on the following functions performed by the ballast bed: maintenance of the rail-sleeper grid, perception of loads from rolling stock, filtration of melt and rainwater. Ballast oil pollution leads to an increase in its distribution in the environment. Oil and oil products have a strong negative impact on the environment, which leads to degradation of vegetation. The causes of oil contamination of the ballast bed, which lead to disruption of its functions, are determined. Attention to increasing the humidity of the ballast in the wintertime, which leads to freezing of the ballast and an increase in the stiffness of the path. Considered a method for cleaning gravel with a gravel-cleaning machine and revealed shortcomings. Studies of the effectiveness of washing oil-contaminated ballast gravel with O-BISM detergent in the absence of mechanical influence on the sample, as well as with the use of barbation and mixing of the sample. The optimal technological mode of application of the washing solution is established. Proposed an option for improving the cleaning of ballast gravel from oil products with a gravel-cleaning machine to solve the problem of efficiently cleaning the ballast gravel from oil pollution, which will solve the problem of crushed stone reuse and utilization.
  • V.2(22), 2015
    115-122

    Organizational and technological parameters of operation of bearing railway track machines cyclic action

    The models of complex organizational and technological parameters of operation of liner-straightening machines cyclic action on the example of the VPR-02 and VPRS-02 using a probabilistic assessment of the reliability of their work. For her study conducted two etapa checks: logical and mathematical. After sampling in accordance with GOST 8.207-76 inspect it belongs-rise normal distribution using Pearson's chi-squared test. Next calculated reliability and risk completion of the planned scope of work machine systems, complexes, components and individual machines in the planned period of time. The models are based on actual field tests of databases, technical and economic indicators of machines, components and systems in real operating conditions. This model optimizes track works with a given reliability at stave-builder, all kinds of repair and current maintenance of railway track. And also give the opportunity to the WHO-define more rational modes of operation of track machines for you, edits, tamping and straightening the railway line, thereby increasing pa O-workings of these machines. They enable organizations operating these machines more reasonably expect the required number of cars processes track works, their cost and labor. The proposed method models quantify the technical reliability of the liner-straightening machines; allow predicting the main complex organizational and technological performance of a particular machine at the design stage of technological processes track works. This method is versatile and can be used to evaluate the technical reliability of any machine systems, components and separate machines.
  • V.2(38), 2019
    127-135

    Method of determining the optimal depth of single well coaxial geothermal manifold

    The article presents the relevance of the use of sources of low-potential, secondary thermal energy, as well as a method for calculating the dependence of the propylene glycol temperature on the depth of a single-well coaxial collector, with constant values of the parameters of the geothermal well. The proposed methodology of the geothermal reservoir, allows to determine the optimal depth of the well, in which the increase in the temperature of propylene glycol in practical terms does not change, respectively, further drilling becomes economically inefficient.