Search results

The development of the system is accompanied by the diagnostics of their achievement in the technical system. Using the possibility of identifying defects in nodal technical systems in the early stages of their occurrence in order to timely and promptly anticipate, the emergence of work productivity, identify simple repair time, identify material costs for replacement or deep restoration. Railway transport is also at the stage of a wide identification of various components and parts of the rolling stock. the appointment of diagnostic systems is a locomotive fleet, as a more identified technical unit. Today, the locomotive fleet uses hardware and software diagnostic complexes, microprocessor-based diagnostic systems, on-board and track monitoring systems that cover the entire range of diagnostic data of the main technical units. However, the use of the availability of systems requires constant improvement of the mathematical model of diagnosis. One of the options for choosing diagnostic models is the use of artificial intelligence research methods - sections of artificial neural networks, which, in comparison with the classical polynomial regression properties, are manifested by the properties of extrapolation accuracy and are applicable for predicting the values of diagnostic parameters according to the data that were due to the sampling of an artificial neural network. These characteristics make it possible to predict the development of defects and possible failures safely and accurately to obtain them and obtain an economic result. The paper presents an example of the development of a diagnostic artificial neural network model for diagnosing oil starvation of motor-axial bearings of the wheel-motor block of a cargo mainline electric locomotive of the 3ES5K «Ermak» series. This factor has a low level of reliability, so the use of continuous diagnostics is required, which requires the use of a point in time.

The article proposes a method of calculation the load between the rolling bodies of the swinging bearings and the bearings of the traction motor, which makes it possible to have the value of the radial clearance in the bearing, as well as the radial movement of the inner rings relative to the outer one. To determine the load perceived by the most loaded rollers, a solution of the equilibrium equation for internal elements is proposed using simple iterations. The implementation of the method is implemented in the Matlab software package. Using the proposed method, the load distribution between the rollers in the traction motor of the VL11K electric locomotive was calculated. To determine the load acting on the bearing, the “Sarga-Subic” section was selected, which has a mountain profile.

The reasons of a case-type vibration in the frictionless bearings in the assembled machine are studied. The method of identification of the radial clearances in the bearings without disassembling is suggested on the basis of the conducted measurements and analysis. The algorithm of vibrational prognostication of operating conditions of the frictionless bearings in the locomotive traction motors is suggested and grounded

The article proposes methodology for assessing the power loss in motor thrust bearings, the nodes of box, traction gear transmission. Revealed dependence between the power losses, the diameter of the tire wheel pair and the speed characteristic of the wheel-motor block. The results can be used to assess the technical condition and energy efficiency of traction rolling stock of Railways.

The article is devoted to the development of a methodology for monitoring the alignment and radial runout of the inner cylindrical seating surfaces of locomotive motor-axle bearings. The main reasons for the wear of the working surfaces of the bearings and the consequences of the influence of the clearances in the interfaces of the plain bearings and the axles of the wheelsets on the increase in the intensity of wear of the parts and the deterioration of the dynamic characteristics of the running gear of the locomotive are listed. The paper presents a basic diagram of the basing and control of deviations from alignment and radial runout of the inner cylindrical surfaces of bearings, describes the design and principle of operation of a special control device for measuring these deviations. The purpose of the work is to substantiate the feasibility of monitoring deviations from the shape and location of surfaces during the repair of motor-axial bearings. The paper describes the sequence of steps for measuring the alignment and radial runout of bearings and the interpretation of the measurement results. The features of the design of the control device are considered, the advantages of its use are listed in comparison with the existing analogues of the devices used to control the alignment of the holes of the body parts located on the same axis. At the same time, it was found that the control of alignment and radial runout must be carried out in order to assess the possible degree of misalignment of the traction motor frame and the axle of the wheelset of the locomotive after repair. Thus, the conclusions obtained confirm the need to tighten quality control of the restoration of locomotive motor-axle bearings by introducing into the production process the operations to control the alignment and radial runout of motor-axle necks and motor-axle bearing liners made of lead bronze, tin or lead-tin babbits.

Some aspects of soil testing are discussed this article to determine the stamp bearing capacity of piles. The techniques of plating tests has been proposed with anchoring of the shell or casing piles future. This method allows you to evaluate the resistance of piles on its end and side surfaces.

The traffic speed increasing on the railways makes strict requirements to the supporting and supporting structures of the contact network, as well as to the parameters and indicators of the contact suspension. The presence of dry friction in the cantilever attachment points indicates a negative effect on the accuracy of adjusting the wires of the contact suspension and on its parameters. The article presents the results of studies of the dry friction value in the console fastening points depending on the type of the contact suspension and suggests a method for reducing friction in the console attachment points. The results of calculations of the effect of friction in the console attachment points on the tension variation along the length of the anchor section are presented.

Analysis of failures of axlebox units of bogies for freight cars in the network of JSC «Russian Railways» for the period from 2010 to 2012, disadvantages of this node known construction trucks of the car of model 18-100. Defined vertical, horizontal and longitudinal loads acting on the buchs site. Mathematical modeling of the dynamic loading roller bearing axle-box under radial load. The influence of dynamic loads and defects in a roller bearing axle-box site on a safety of movement of the carriage.