Search results

The article includes research results of analyzing and evaluating 3ТЕ10М diesel locomotive`s efficiency on a hilly-mountainous direction Marokand-Navoi of Uzbekistan railways while hauling freight trains with and without stopping on through stations (division points).Main parameters of basic movement work of researched UzTE16M3 diesel locomotives are shown as tabled values and graphic dependencies,also equations of organizing necessary calculations mentioned above in accepted range of mass variation are marked here.

The introduced results of the investigation by valuation of efficiency the employment of the locomotives of the diesel (the diesel locomotives 3TE10M, UzTE16M3) and of the electrical (the electric locomotives 3VL80S) tractions in the plainly direction of railway track by the method of averagin design values. Modified average significances main indicator move working of the investigations of the diesel locomotives 3TE10M, UzTE16M3 of the evaluation mind numeral and table facts, and also graphic arts dependences, representative oneself arithmetical mean value with taking into account of the movement goods trains without any stops and with stops on the spaces stations, passing - tracks and divides points, which have received in the result to uses of the traction calculation for different conditions organization of the goods movement. Designate equations for organization calculation values mention exponents in the accepted range changing of the masses trains

The results of the investigations on the evaluation of efficiency use of the diesel locomotives UzTE16M4 in the mountainous direction Kumkurgan - Tashguzar of the Uzbek railways track by of the movement goods trains with stops and without any stops on the spaces station are presented.

The article discusses the possibility of determining the specific fuel consumption of diesel locomotives in operation using indirect calculation methods based on the use of these locomotive onboard systems and supplementing them with mathematical models of the operating cycle and the model for determining the composition of the exhaust gases of a diesel engine. The basic equations and algorithms proposed for the implementation of such a method of mathematical models and the results of their use are presented, the results of a comparison of simulation results and experimental data on the specific consumption of fuel of diesel locomotives TEM18DM are presented. A possible algorithm for their joint use is proposed, conclusions are made on the possible development of such a method for determining the energy efficiency of diesel locomotives without taking them out of service.

The article presents an analysis of the costs of various fuel and energy resources inJSC “Russian Railways” for the period from 2013 to 2017, results the observations on the reduction of the share of diesel fuel in the total resource consumption structure, the analysis of the distribution of the number of failures of diesel locomotive nodes along the route, the distribution of failures of the cooling system nodes along the route and the distribution of failures of diesel locomotive , the values of power consumed to drive the fan of the refrigerator shaft, various diesel locomotives. Calculated fuel flow ratespent on the drive of the fan of diesel locomotives.

The article presents a comparative analysis of the effectiveness of automated systems for recording the work parameters of autonomous locomotives. The relevance of the use of such systems is due to the prevention of defects at the stage of identifying possible malfunctions during the operation of locomotives during the inter-repair periods. So the used systems of parametric diagnostics of power plants of autonomous locomotives are considered. Also, for comparison, the experience of foreign research on the use of a diesel locomotive monitoring system is presented. Despite the fact that the existing automated systems for registering the parameters of diesel locomotives have a wide range of functionality that allows you to obtain typical dependences of the power of a diesel generator set (DSU) on temperature and pressure, these systems do not take into account the peculiarities of the flow of in-cylinder processes that can significantly affect the power of the DSU. The article proposes a method for monitoring and adjusting the power of the diesel engine during operation by registering the operating modes of the equipment and determining the actual power of the diesel engine by expanding the range of diagnostic parameters by installing additional sensors for registering measured values for the accuracy of monitoring and tuning the diesel engine and making timely decisions on maintenance and repair of locomotives. A block diagram of the recorder of operating modes with the location of sensors for measuring informative parameters and a diagram of connecting the recorder to the power circuit using the example of a shunting diesel locomotive CHME3 is shown. Software has been developed that can be additionally installed in the standard automated system for registering the parameters of the operation of the CHME3 diesel locomotive with subsequent data processing.

In the article the paper considers mathematical modeling of fuel equipment of high pressure and regulator of the rotation frequency of the crankshaft of the diesel engine. Analysis of factors affecting fuel equipment, mathematical modelling of the process of fuel into the cylinders, as well as mathematically describes the speed control of the crankshaft of the diesel diesel engine. Joint mathematical model of fuel equipment and rotation speed regulator. Presented algorithm and program calculation process the fuel feed to the cylinders of a diesel engine with a light hydraulic characteristics of generalized elements of fuel equipment and provision of the Executive mechanism of the regulator of the rotation frequency of the crankshaft of the diesel engine. In the work used mathematical and simulation, system analysis methods, the comparative method, methods of theoretical knowledge (formalisation), common logical methods and techniques of research (analysis, synthesis, classification, analogy ).

The article summarizes and analyzes data on the use of natural gas (methane) as an additive to diesel fuel on the low-pressure line of diesel engines of locomotive CHME3.The results of The gas engine fuel effect assessment on the efficiency of locomotives CHME3 are presented.

The article discusses the approach to generalized evaluation of technical condition of the diesel locomotive power plant functional subsystems based on the reduction of private parameters extracted by results of the analysis graph model to one-dimensional time function with use of mathematical expression of a nonlinear medium. Results of generalized evaluation of technical condition of the power plant fuel system are presents.

The technical condition of the cylinder-piston group has significant effect on the reliable operation of the diesel locomotive engines. The most susceptible to the premature failure is the head of cylinders. It is caused by the heat release rate of the combustion chamber detail. The increase of the diesel locomotive engines cylinder heads durability in operation causes the relevance of the researches. In the article the set of the factors influencing on the diesel locomotive engine cylinder heads durability is defined, their main groups and subgroups are found. In the offered classification the subjective factors which directly depend on the human activity are dominated. It is possible to reduce the influence of the subjective factors by means of the human activity wrong solutions reduction while operating and repairing locomotives. The measures that improve diesel locomotive engine operation and positively affect the reliability of the cylinder heads are considered. Simple in implementation methods to extend the service life of the cylinder-piston group are offered. They are decreasing temperatures gradient during the post-stopping period of the power point and upgrading cooling system.

The reliability of diesel engines is mainly determined by the reliability of operation parts of the cylinder-piston group and crank mechanism. High-quality cleaning of engine oil during operation of mechanical impurities, provided filters coarse, fine filter and centrifugal filter, reduces the rate of wear and tear. The results of simulation of a centrifugal filter to assess its efficiency and the quality of screenings of particles of different sizes in the process of exploitation.

The article discusses the approach to evaluation of technical condition of the diesel locomotive power plant fuel system as a part of an integrated microprocessor control systems. Presents an approach of generalized evaluation of technical condition of the power plant fuel system. By results of the analysis of a fuel system graph model set of control parameters is selected, the algorithm allowing to establish the reasons of controlled parameters output of admissible limits is developed.

The design of the hydrostatic fan drive of the cooling system of diesel engines of passenger locomotives of the TEP70 all series is considered. According to the results of the analysis of malfunctions of components and parts of the cooling system of locomotives, it showed that the main reasons for the failure of the hydrostatic fan drive are: the destruction of the housing and overheating of the bearings of the hydraulic motor, oil leakage at the installation site of the rubber diaphragm and loss of rigidity of the spring of the thermostat. The reasons for which are often the temperature conditions and the life of the parts. The article discusses the issues of improving the efficiency of the hydrostatic fan drive of the cooling system of diesel locomotives. An increase in the life of the hydraulic motor can be achieved by eliminating idle from its operating time, since it is connected by a rigid coupling with the diesel shafts. Ensuring the independence of the operation of the hydraulic motor relative to the diesel engine is possible by changing the design of the hydraulic fan drive, by installing a viscous coupling for the transfer torque of the shaft only during the period of necessary useful work, when a certain oil temperature is reached. To increase the reliability of the thermostat, the possibility of installing an additional rubber diaphragm with increased tension force, for trouble-free operation of the thermostat when the pressure reaches 12 MPa and when the oil viscosity decreases, is considered. A malfunction of the thermostat often leads to the most serious consequences, up to the failure of the locomotive, where the most common cause is the loss of rigidity of the spring of the thermostat due to the jamming of the spool, which affects the redirection of the oil flow, and there is a high probability of an increase in the temperature of oil or water in the system. The considered main malfunctions of the hydraulic fan drive and ways to solve them will significantly increase the reliability of its operation and the efficiency of passenger locomotives.

The article discusses the approach to operational evaluation of technical condition of the diesel locomotive power plant functional subsystems as a part of an integrated microprocessor control systems. Presents an approach to operational evaluation of technical condition of a fuel system. By results of the analysis of a fuel system graph model set of control parameters is selected, the algorithm allowing to establish the reasons of controlled parameters output of admissible limits is developed.

It is offered the technique for the assessment of the efficiency of the application of the mixed hydrocarbonic kinds of fuel in the power installations of diesel locomotives. The model calculations have been executed with a glance of the changing of the physicochemical and thermalphysic characteristics of the fuel mixtures and the service conditions of diesel locomotives.

The method of determining the durability indicators of wheel pairs of locomotives is considered on the example of diesel locomotives of the 2TE25KM series operated on the Volga railway. For this purpose, the 90% resource of the wheel pairs of the studied series of locomotives was determined, and it was compared with the accepted standard indicator. In addition, a controlled parameter of the wheelset is selected, limiting the reliability of this node. To conduct the study, methods of mathematical statistics and probability theory were used, in particular, the Laplace distribution function, the Student's criterion, as well as the results of calculations of the dependencies of the mean value and the standard deviation of the controlled parameters, the initial values of developments and operating time corresponding to the probability of failure 0.5. In this study, a mathematical model for assessing the durability of wheelsets from the point of view of reliability theory was developed. The evaluation of the durability indicators of the wheelset elements was carried out on the basis of the type of random variable distribution law with its parameters obtained on a computer and adopted according to the Pearson criterion. As a result of the calculations, 90% of the life of the wheelset was obtained according to two controlled parameters, which amounted to 476.6 thousand km for the thickness of the bandage, and 282.6 thousand km for the thickness of the ridge. The results obtained were compared with the values adopted in the Technical Specifications for this series of locomotives (800 thousand km). km), as well as with statistical data on the values of controlled parameters obtained during processing and analysis - 240 thousand km. Due to the fact that in operation the average life of the wheelset is determined by a larger number of controlled parameters, taking into account unscheduled repairs, and in this study - only on the basis of the thickness of the bandage and the ridge, it is not possible to talk about full compliance with the calculated and actual data. According to the results of calculations, the limiting reliability of the wheelset is such a controlled parameter as the thickness of the ridge. For a more accurate assessment of the durability of wheelsets, it should also be taken into account that the intensity of wear of rolling stock equipment is affected by specific operating conditions, in this regard, inter-repair runs should be adjusted taking into account the influence of external factors during operation. In order to fully assess the durability of wheelsets in the future, it is necessary to take into account additional factors, in addition to those that affect the parametric change of random variables, as well as the fact that takes into account the monitoring and analysis of all controlled parameters of this node during the operation of locomotives.

The subject of consideration of this article is the traction electric motor of a diesel locomotive. Traction electric motor (TED) is the main element of power transmission, therefore, the reliability of the locomotive as a whole depends on its reliability. The main causes of failures of traction motors in operation are considered. Based on the analysis of statistical data, it can be argued that the most damaged part of the traction motor is its armature. In the context of the introduction of new classes of insulation heat resistance by the new standard - GOST 2582-2013 - ensuring the reliability of the anchor is especially important. The causes of the most common failures of TED in operation have been established: violation of the integrity of the insulation of the winding by the sharp edges of the extreme sheets of the anchor core iron package when laying the winding in the grooves of the core, vibration of the extreme sheets of the anchor core iron package when exposed to electromagnetic forces with a frequency multiple of the number of poles of the electric motor, imperfection of the fastening system of the frontal parts of the armature winding, mismatch of the coefficients of temperature linear elongations copper windings, insulating materials and steel core of the armature. The result of the analysis of the design of serial TED were proposals to improve the design of the nodes most prone to failures. To eliminate breaks in the insulation of anchors in operation, a new design of pressure washers and an improved technology for impregnating anchors of commercially produced traction electric motors of locomotives are proposed. The proposed design solutions can be used both when creating new TED designs for promising locomotives and when upgrading serial designs. Thus, the application of the proposed design and technological solutions will increase the reliability of the diesel locomotives.

This article is about technical and economic indicators of the operation of freight locomotives at the ranges of Russian Railways. The most attention is paid to such indicators as train mass, fuel consumption, technical and district speed. There is an analysis of technical and economic indicators during the period from 2010 till 2019. Based on the analysis of technical and economic indicators in the real mode of operation of freight diesel locomotives it's presented calculation of dimensionless train mass coefficients, fuel efficient use, district and technical speeds. The presented calculation fully characterizes as well using degree of technical and economic characteristics of diesel locomotives in of power and time as the effectiveness of system organization in their operation. To know the operating modes of diesel-generator sets of diesel locomotives in train work is source material for the analysis of technical characteristics of locomotive power equipment and making recommendations on their optimization in relation to operating conditions

At this time the traction electric motor (TEM) is one of the most important elements of the design of rolling stock, since the safety and stability of the transportation process on the railway network of JSC "Russian Railways" depends on its uninterrupted operation. This article is given a detailed analysis of the TEM failures of diesel locomotives of the 2,3TE10 v / series and the assigned fleet of the Novaya Chara locomotive depot of the East Siberian Traction Directorate. The section of circulation of diesel locomotives from Taksimo station to Hani station is one of the most difficult not only in the borders The East Siberian Railway, but also the entire railway network of the country. The analysis of the statistics of the reasons for the failures of the TEM of locomotives of the Novaya Chara locomotive depot for 2006 - 2012 showed that there is a rather extreme operation mode and that most of the failures are due to the breakdown of the insulation of the anchor winding of the TEM. During a research trip to the diesel locomotive maintenance site, a team of IRGUPSA scientists conducted full-scale measurements speed of movement, driving mode of the train, heating temperature of the TEM, taken into account the climate factors - ambient temperature, relative humidity, pressure and others. After studying the available information, it was proposed to additionally coat the insulation with FL-98 varnish in order to maintain and restore its properties in the conditions of the Winter locomotive depot during TR-3. IRGUPS has been working for a long time to study the process of drying insulation using infrared radiation (IR). The effectiveness of this method has been proven by numerous experimental studies. Several PhD theses have already been defended in various dissertation councils on this topic. This article presents also the statistics of failures of operated TEM already with additional varnish-impregnated insulation of open frontal parts after the implementation of measures based on the results of the work of the IRGUPS group of scientists. It is established that the method of applying the compound to the insulation of the frontal part of the windings of electric machines and encapsulating it with the help of IR radiation energy is effective in combating TEM failures due to insulation breakdown.

The reliability of diesel locomotive operation largely depends on its temperature conditions. The stability of temperature conditions should be provided by the cooling system, which regulates the heat removal from the coolant depending on its temperature and the operating mode of the diesel engine. During operation, with the existing algorithms for the operation of standard cooling systems, significant temperature drops of the coolant are observed over fairly short time intervals. This negatively affects the reliability of the diesel engine. On different series of diesel locomotives, the system for regulating the operation of refrigerator fans may differ significantly. To regulate the air flow through the refrigerator sections, an algorithm is used to turn on or off a certain number of motor fans or to change the oil flow through an axial piston type hydraulic machine, or to regulate the oil level in a torque converter. To develop an algorithm for controlling the operation of the cooling system in order to stabilize temperature conditions, it is necessary to study the processes implemented in operation. The article presents the results of the study of temperature fluctuations of the coolant during the operation of locomotives. According to the results of the study, the realizable rates of increase and decrease in the temperature of the coolant, taking into account the inertia of the process, are established. It has been established that standard cooling systems do not allow exceeding the established limits, but do not exclude significant changes in the temperature of the coolant when changing the operating mode of the diesel engine. The obtained results can be used to improve the management of heat exchange processes in order to stabilize the temperature conditions of the diesel engine, which will increase the reliability of its operation.