Search results

This article discusses the use of innovative technology-carburizing copper collector plates and apparatus for forming a carbon layer on the working surface of the collector traction motors. To improve switching performance and improve the reliability of electric vehicles are encouraged to use the DC electroerosion processing method.

Abstact. During automated rheostat tests of locomotives itʹs necessary to control a lot of parameters of the diesel generator set and support systems. Due to the features of perception of the information by human the control is brought to the observation of a small number of parameters. Implementation in practice of rheostat tests of automated systems of inspection and testing allowed to expand the amount of received information. In this article is offered using automated control systems of diesel-generator sets parameters during rheostat tests which allow to accumulate and analyze test date using developed protocols forms and pivot tables with parameters in entire range of loads, also it helps to determine the quantitative index of a technical condition of diesel-generator set.

Offers a probabilistic model of formation of modes load of diesel-generator unit locomotives given the power of auxiliary units in conditions of their operation on the example of locomotives 2TE10M.

The article presents a comparative analysis of the effectiveness of automated systems for recording the work parameters of autonomous locomotives. The relevance of the use of such systems is due to the prevention of defects at the stage of identifying possible malfunctions during the operation of locomotives during the inter-repair periods. So the used systems of parametric diagnostics of power plants of autonomous locomotives are considered. Also, for comparison, the experience of foreign research on the use of a diesel locomotive monitoring system is presented. Despite the fact that the existing automated systems for registering the parameters of diesel locomotives have a wide range of functionality that allows you to obtain typical dependences of the power of a diesel generator set (DSU) on temperature and pressure, these systems do not take into account the peculiarities of the flow of in-cylinder processes that can significantly affect the power of the DSU. The article proposes a method for monitoring and adjusting the power of the diesel engine during operation by registering the operating modes of the equipment and determining the actual power of the diesel engine by expanding the range of diagnostic parameters by installing additional sensors for registering measured values for the accuracy of monitoring and tuning the diesel engine and making timely decisions on maintenance and repair of locomotives. A block diagram of the recorder of operating modes with the location of sensors for measuring informative parameters and a diagram of connecting the recorder to the power circuit using the example of a shunting diesel locomotive CHME3 is shown. Software has been developed that can be additionally installed in the standard automated system for registering the parameters of the operation of the CHME3 diesel locomotive with subsequent data processing.

On the basis of a previously proposed General method of using a database of measurements onboard system parameters diesel generator set of shunting locomotives a technique of determining the distribution law of the values characterizing the intensity of change of current of the traction generator, evaluation parameters, determining a model function of the parameter changes on the overhaul period. The technique and criteria for assessing the technical condition of the diesel generator set of the observed locomotive using the model function are given

Constantly conducted studies of the reliability of electric equipment of traction rolling stock have shown that the most vulnerable element is the insulation design of the windings of power equipment, especially traction motors. Existing methods and means of restoration and repair of insulating structures of windings of traction motors of modern electric locomotives, based on drying polymer insulation in convective high-power electric furnaces, are energy and time-consuming. This technology has not undergone significant changes for over 50 years. In order to extend the polymer insulation life of electric vehicles of traction rolling stock, an insulation drying technology using thermal radiation was proposed that reduces the cost of electricity for repairs and increases the drying speed by reducing heat loss. The article is devoted to the design of a new device for drying the insulation of the windings of the magnetic system of the skeleton of the backbone of the electric locomotive traction engine by a rotating thermal field. The analysis of works and conclusions based on the results of theoretical studies related to mathematical modeling is presented. As a method of mathematical modeling, the finite element method was used in the work. A simplified 3D model of the winding of the core magnetic system with infrared emitters was created. According to the results of finite element mathematical modeling, temperature fields of heating the polymer insulation of the windings of the core of the traction motor were obtained. Based on this calculation, the work selected the optimal design parameters of the proposed device that provide the minimum energy costs for various sizes of the skeleton of the traction engines. Based on the proposed device variant, an application for a patent for a utility model has been filed, and this prototype is being assembled on the basis of the Ulan-Ude locomotive and car repair plant, a branch of Zheldorremmash JSC. New directions for further research are also set.

Railway transport faces the challenges not only to ensure uninterrupted transportation of national economic goods, but also to develop new locomotives and increase the efficiency of their use. In particular, the currently accepted mode of starting diesel locomotives of the UzTE16M type leads to additional consumption of fuel resources, therefore, research on the development and improvement of the conditions for starting diesel locomotives of this type is relevant. Based on the study of previous studies and designs of various systems in order to facilitate the start of diesel locomotives with electric transmission, it is necessary to establish the available reserves of the power circuit and control circuits. The article considers a mathematical model of torsional oscillations in a diesel generator start-up system with two concentrated mass moments of inertia. Torsional oscillations between the traction generator and the crankshaft of diesel locomotives of the UzTE16M type have not been previously considered. In this article, the problem of torsional oscillations of the reduced masses of the armature of the traction generator and diesel engine in the mode of starting the DG from the battery and additional devices is solved. The Lagrange method has derived a system of mass oscillation equations based on generalized coordinates of elastic oscillations between the masses of the armature of a traction generator and a diesel engine with a variable mass moment of inertia. For the resulting system of equations, the solution is performed by the method of operational calculus, taking into account the accepted functions of mass moments of inertia, moments of driving forces and resistances. Conclusions are drawn that the operation of the diesel starting system on diesel locomotives of the UzTE16M type is determined by the functions of the reduced mass moment of inertia of the diesel, the driving torque and the angular velocity function; the resulting solution makes it possible to calculate the driving torque and the range of angular velocity changes when starting the diesel generator set of UzTE16M locomotives for further comparison with experimental data; when using the recommended electric scheme for starting a diesel locomotive, an increase in the driving torque of the diesel crankshaft and the angular acceleration speed of the traction generator armature is achieved. Based on the developed model, it is recommended to determine the angular velocity of the diesel crankshaft.

Measures to normalize the consumption of diesel fuel for the operation of shunting locomotives are an integral part of the efficiency of the use of traction rolling stock. Due to the presence of problems in the formation of the fuel consumption rate, such as the performance of the shunting locomotive, the loading and technical condition of the diesel generator set, the operating conditions of locomotives, it is necessary to improve the existing fuel consumption rate determining methodology. The article presents the results of studies of the operating modes of shunting locomotives, the parameters of the spread of the values of the operating time of the diesel generator set in the load mode for shunting locomotives of the TEM2 and TEM18DM series are given. A mathematical model based on the bases of machine learning models is proposed, taking into account the degree of loading of the diesel generator set and the technical and economic characteristics of the locomotive series. The task of the proposed model is to determine the fuel consumption of a locomotive by an iterative calculation method, where the input parameters of the model are the performance indicators of the locomotive. It is established that the method of forming the fuel consumption rate for performing shunting operations should take into account the degree of loading of the diesel generator set and the technical and economic characteristics of the locomotive series. According to the results of the implementation of the proposed model for establishing specific fuel consumption rates for the studied locomotives based on the results of their operation, the average indicators of specific fuel consumption by locomotives by the positions of the driver's controller are obtained. The proposed method allows us to take into account the actual degree of loading of the diesel generator set and establish the correct fuel consumption rate for a certain period of operation of the locomotive, which represents the practical significance of the work. The presented research results are the beginning of work on the development of an intelligent system for diesel fuel rate rationing for the operation of shunting locomotives.

As a result of work statistical data bank of hardware and software complex «Bort» was researched. Methodology for TEM2 locomotive deiesel-generator plant parameters indicating while running hours transformation in integrated time space is suggested.

Electric power installation of a special self-propelled rolling stock used in the power supply divisions is considered in the paper; the expediency of its use for the analysis of the main energy indices, in particular, the evaluation of the efficiency of electro-hydro-mechanical units at separate and joint operation, is shown. To assess the energy efficiency, an integrated efficiency factor has been proposed that allows to account the energy parameters of electrical installations operating in various modes. Recommendations have been given to increase the power factor of electrical installations.

The article suggests the method of monitoring the consumption of fuel for shunting and household works using the onboard systems. The first results of the evaluation of the effectiveness of the use of this method in the course of the experiment station «Omsk - Passenger»

The article deals with the possibility of applying diagnostic algorithms, taking into account the complexity of the examination, applied to a specific problem of searching for damage in receiver end of station's tonal track circuit. The article presents calculated conditional probabilities, diagnostic weights, particular and general diagnostic values of examinations, taking into account the time of movement and work by an electrician. Based on the calculations performed, a conditional diagnostic algorithm has been compiled, taking into account the complexity of the following for the equipment of the relay end of the tonal rail circuit. The effect of using this algorithm is shown. The results of the work given in the article can be used in the maintenance of automation systems of existing railways.

The article deals with the analysis of the modes of operation of shunting locomotives; characteristics of the setting characteristics of the traction generators when performing resistance tests of locomotives. The statistical average values of the load parameters of diesel generator sets of shunting locomotives TЭM2 in the process of performing shunting work on marshalling and precinct stations. When monitoring the external characteristics of the locomotive when performing resistance tests with the ASKI "CYPRESS" was observed of the external characteristics of a normal ("classical") and "convex" shape. Normal (classical) external characteristics of the locomotive TЭM2 No. 1 equidistant removed from the borders of the tolerance field; and "convex" external characteristics of the locomotive TЭM2 No. 2 , in the field of tolerance, support of the constancy of the power diesel generator sets, due to the imperfection of the machinery of the regulatory system, particularly the Electromechanical characteristics of the pathogen.

The article describes the possibility of applying diagnostic algorithms, taking into account the complexity of the examination, applied to a specific problem of searching for damage in receiver of station's tonal track circuit. The aim of the work is to justify the need to take into account the complexity of the survey when compiling these algorithms. The order of compiling the diagnostic algorithm is shown, conditional probabilities, diagnostic weights, private and general diagnostic values are calculated. On the basis of the calculations performed, algorithms for diagnosing taking into account the complexity of the examination in receiver of the tonal track circuit was compiled. The work results presented in the article can be used for technical maintenance of automation systems of operating railways.

The article deals with the possibility of applying an unconditional diagnostic algorithm, applied to a specific problem of searching for damage in a station's tonal track circuit. The aim of the work is to substantiate the possibility of applying diagnostic algorithms, in order to reduce the time of search and repair of damages. The order of compiling the diagnostic algorithm is shown, conditional probabilities, diagnostic weights, private and general diagnostic values are calculated. On the basis of the calculations performed, an unconditional algorithm for diagnosing the tonal track circuit was compiled. The results obtained in the article can be used for technical maintenance of automation systems of operating railways.

The article deals with the possibility of applying a conditional diagnostic algorithm, applied to a specific problem of searching for damage in a station's tonal track circuit. The aim of the work is to substantiate the possibility of applying diagnostic algorithms, in order to reduce the time of search and repair of damages. The order of compiling the diagnostic algorithm is shown, conditional probabilities, diagnostic weights, private and general diagnostic values are calculated. On the basis of the calculations performed, a conditional algorithm for diagnosing the tonal track circuit was compiled. The advantages of the conditional diagnostic algorithm in relation to the unconditional algorithm are demonstrated. The results obtained in the article can be used for technical maintenance of automation systems of operating railways.