Search results

At this time, an urgent area of development in the field of railway transport is the reduction of operating costs for maintenance and repair of collector traction motors . The analysis of data from the monitoring of new rolling stock shows that one of the elements affecting the reliability during the operation of traction motors is the collector-brush unit. Failures associated with unsatisfactory operation of the collector-brush unit elements reach 30% of the total number for traction motors. At work of traction electric motors there is a continuous process of mechanical, electric and chemical interaction of electric brushes with a collector, leading to deterioration of electric brushes. During the research, the authors proposed a mathematical model to determine the intensity of wear of electric brushes. The paper provides information about developing an approach that allows using the operating data recorded by locomotive on-board parameter monitoring system to determine the service life of traction motor brushes. For elimination of the problem connected with processing of big arrays of parameter values for calculation, in mathematical model of intensity of wear of electric brushes it is offered to divide the received data into intervals with definition of average values and probability of approach for each of them, and also the technique on realization of the offered decision is resulted. The developed approach allows us to eliminate the need for long-term wear tests on traction motors in operation and reduce not only time, but also financial costs. The reliability of the developed method was assessed by comparing the wear values of different types of electric brushes installed on locomotive traction motors in operation with the calculated values.

The article presents a comparative analysis of the effectiveness of automated systems for recording the work parameters of autonomous locomotives. The relevance of the use of such systems is due to the prevention of defects at the stage of identifying possible malfunctions during the operation of locomotives during the inter-repair periods. So the used systems of parametric diagnostics of power plants of autonomous locomotives are considered. Also, for comparison, the experience of foreign research on the use of a diesel locomotive monitoring system is presented. Despite the fact that the existing automated systems for registering the parameters of diesel locomotives have a wide range of functionality that allows you to obtain typical dependences of the power of a diesel generator set (DSU) on temperature and pressure, these systems do not take into account the peculiarities of the flow of in-cylinder processes that can significantly affect the power of the DSU. The article proposes a method for monitoring and adjusting the power of the diesel engine during operation by registering the operating modes of the equipment and determining the actual power of the diesel engine by expanding the range of diagnostic parameters by installing additional sensors for registering measured values for the accuracy of monitoring and tuning the diesel engine and making timely decisions on maintenance and repair of locomotives. A block diagram of the recorder of operating modes with the location of sensors for measuring informative parameters and a diagram of connecting the recorder to the power circuit using the example of a shunting diesel locomotive CHME3 is shown. Software has been developed that can be additionally installed in the standard automated system for registering the parameters of the operation of the CHME3 diesel locomotive with subsequent data processing.