Search results

The article includes research results of substantiation 3ТЕ10М diеsel locomotive`s movement work parameters on a hilly-mountainous direction of railway while moving freight trains with stops and without any stops on the spaces stations and separating points

The article includes research results of analyzing and evaluating 3ТЕ10М diesel locomotive`s efficiency on a hilly-mountainous direction Marokand-Navoi of Uzbekistan railways while hauling freight trains with and without stopping on through stations (division points).Main parameters of basic movement work of researched UzTE16M3 diesel locomotives are shown as tabled values and graphic dependencies,also equations of organizing necessary calculations mentioned above in accepted range of mass variation are marked here.

The introduced results of the investigation by valuation of efficiency the employment of the locomotives of the diesel (the diesel locomotives 3TE10M, UzTE16M3) and of the electrical (the electric locomotives 3VL80S) tractions in the plainly direction of railway track by the method of averagin design values. Modified average significances main indicator move working of the investigations of the diesel locomotives 3TE10M, UzTE16M3 of the evaluation mind numeral and table facts, and also graphic arts dependences, representative oneself arithmetical mean value with taking into account of the movement goods trains without any stops and with stops on the spaces stations, passing - tracks and divides points, which have received in the result to uses of the traction calculation for different conditions organization of the goods movement. Designate equations for organization calculation values mention exponents in the accepted range changing of the masses trains

In this paper we presented an option accounting compliance joints through mathematical modeling of prefabricated single-walled cylindrical geometric op-totropnyh shells on the basis of the contact boundary value problem of structural type.

This article is devote to the development of software for analyzing and transforming data from studies of the collector surface traction motors using a device of control profile commutator PKP-4M. The use of this computer application during the processing of the experimental data will improve the reliability of the control profile of the commutator, and to calculate the main diagnostic parameters characterizing the effect of the profile on the commutation process.

In article advanced techniques of laboratory and natural aerodynamic researches of a pantograph and its elements are considered. It is specified that carrying out modeling by means of computational fluid dynamics methods doesn't allow to replace pilot studies completely now. Need of correction of the received results because of influence of change of density of the environment during experimental studies locates. Density of the environment is offered to consider it as an integrated indicator. The main methods of measurement of density of the environment are given, their advantages and shortcomings are listed. The conclusion is drawn that it is most expedient to use ultrasonic measuring instruments to control of an indicator of density. The principle of operation of these measuring instruments is described. The example of use of an advanced technique of laboratory researches of the aerodynamic device for regulation of force of contact pressing of a current collector is given. Researches were conducted for device wing angles of rotation from zero to fifteen degrees with an interval of five degrees. After that aerodynamic characteristics of a wing of the aerodynamic device were under construction and comparison to results of modeling was carried out by means of a computing hydraulic gas dynamics them. The results received in OSTU laboratory well were correlated with results of computational fluid dynamics modeling that testified to adequacy of the applied technique.

The technique and algorithm of definition of consumption rates of materials on the current maintenance of a way depending on freight density, the passed tonnage, the plan and a profile of sites of a way, axial loadings of a rolling stock is given. Standards are developed on the basis of the analysis of the existing normative documents, statistical data from forms of primary accounting of PU-74 of the consumption of materials, annual reports of linear sites and other sources. Depending on service conditions standards are determined by analytical dependences and the correcting coefficients.

The article deals with the issue of the interaction of the track and rolling stock and the relationship of factors affecting the comfort of passengers. Examples of passenger comfort indicators are given and possible causes of deviations in the track geometry are considered. The results of experimental trips are analyzed and the data obtained by standard diagnostic tools are presented. Natural irregularities in the plan and profile were constructed in the analyzed areas where comfort indicators were exceeded. The data presented demonstrate the use of an additional indicator of the interaction of the track and rolling stock, which is advisable to take into account to identify deviations in the geometry of the track gauge when carrying out work on the current maintenance of the track, since there are irregularities or combinations of irregularities in the track that have an increased dynamic impact. It is worth noting that currently not all irregularities are registered, and accordingly such irregularities are not eliminated. Using the «passenger comfort» indicator calculated from the accelerations occurring in the elements of the rolling stock, it is possible to determine the places and deviations of the geometry of the track gauge that affect the dynamic characteristics of the rolling stock, causing increased comfort indicators.

The article presents the results of measurements of electricity on active and passive sectioning posts the traction power supply system direct current sections of railways with III and IV path profile type. Basic characteristics of operating modes sectioning posts for the purpose of assessing the amount of electricity transferred and duration of work electricity storage in different modes are considered. The most observed voltage values, volumes of transmitted energy and duration of each case are defined. Choice of theoretical distribution laws, allowing to use the experimental values obtained in further calculations in modeling of operating modes electricity storage is completed.