Search results

The article includes research results of analyzing and evaluating 3ТЕ10М diesel locomotive`s efficiency on a hilly-mountainous direction Marokand-Navoi of Uzbekistan railways while hauling freight trains with and without stopping on through stations (division points).Main parameters of basic movement work of researched UzTE16M3 diesel locomotives are shown as tabled values and graphic dependencies,also equations of organizing necessary calculations mentioned above in accepted range of mass variation are marked here.

The article proposes a method of calculation the load between the rolling bodies of the swinging bearings and the bearings of the traction motor, which makes it possible to have the value of the radial clearance in the bearing, as well as the radial movement of the inner rings relative to the outer one. To determine the load perceived by the most loaded rollers, a solution of the equilibrium equation for internal elements is proposed using simple iterations. The implementation of the method is implemented in the Matlab software package. Using the proposed method, the load distribution between the rollers in the traction motor of the VL11K electric locomotive was calculated. To determine the load acting on the bearing, the “Sarga-Subic” section was selected, which has a mountain profile.

The results of the investigations on the evaluation of efficiency use of the diesel locomotives UzTE16M4 in the mountainous direction Kumkurgan - Tashguzar of the Uzbek railways track by of the movement goods trains with stops and without any stops on the spaces station are presented.

It is shown that dynamic systems, «rolling stock - way» due to the unevenness of the path on length should be described by ordinary differential equations with variable coefficients, the method of analyzing differential equations with constant, variable and random coefficients describing the movement of electric locomotive nodes when they move along an uneven path. In the transition to a new paradigm, we can talk about areas of dynamic instability, which in the case of simple parametric resonances develop near critical frequencies, but this is not one specific point, but a zone that expands with increasing coefficients of parametric excitation. In addition, the presence of friction in the system does not guarantee the limitation of resonant amplitudes. The effect of parametric arousal factors on the width of the dynamic instability zone has been established. There are many other features in the behavior of differential equations with variable coefficients, so it is impossible to replace the action of unevenness with some equivalent geometric irregularity, since at this moment there is no exact solution to the problem with which to compare the results of approximate mathematical models.

The introduced results of the investigation by valuation of efficiency the employment of the locomotives of the diesel (the diesel locomotives 3TE10M, UzTE16M3) and of the electrical (the electric locomotives 3VL80S) tractions in the plainly direction of railway track by the method of averagin design values. Modified average significances main indicator move working of the investigations of the diesel locomotives 3TE10M, UzTE16M3 of the evaluation mind numeral and table facts, and also graphic arts dependences, representative oneself arithmetical mean value with taking into account of the movement goods trains without any stops and with stops on the spaces stations, passing - tracks and divides points, which have received in the result to uses of the traction calculation for different conditions organization of the goods movement. Designate equations for organization calculation values mention exponents in the accepted range changing of the masses trains

This article discusses the improvement of the electrical component of the wear model of the elements of contact pairs of current collector devices under conditions of high-speed movement. The histograms of the electrical wear of contact elements obtained by calculation using the existing and improved mathematical models are presented. Analysis of the obtained histograms allows us to conclude that the calculation accuracy is improved according to an improved mathematical model by taking into account the influence of the aerodynamic effects of the air flow and the speed of the rolling stock.

The article considers the dynamic processes of the oscillatory system «wagon - way», its mathematical model is formed and its features are established. The analysis of existing approaches to the consideration of the influence of dissipative forces on the stability of rolling stock is carried out, their shortcomings are revealed. When composing dynamic process equations, it is important to proceed from their exact expressions when considering kinetic and potential energy, i.e. to take into account the relationship between generalized coordinates, which will allow us to consider in detail the process of rolling stock oscillations. The zone of autoparametric resonance is found. It is established that dry friction forces do not interfere with parametric resonance. Dynamic equations are compiled taking into account the scattering forces arising in the contact points of the structural elements of the car. The influence of dry friction forces on the critical coefficient of parametric excitation is determined. The areas of dynamic instability of a car when moving along a railway track with different characteristics are determined. The features of the behavior of the system under the influence of dry friction forces are revealed. It is established that dry friction forces do not reduce the amplitude of bouncing and can lead to an increase in lateral pitching vibrations due to energy pumping.

The article includes research results of substantiation 3ТЕ10М diеsel locomotive`s movement work parameters on a hilly-mountainous direction of railway while moving freight trains with stops and without any stops on the spaces stations and separating points

The experience of the railways electrification in Russia and the justification of the current type choice for the electrification of the Ulan-Bator Railway are considered. The calculation of the maximum mass of the wagons of freight trains of an AC electric locomotive of 2ES5K and an electric locomotive of direct current 2ES6 in the conditions of the Ulan Bator Railway is performed. The rationale for choosing the kind of current for the electrification of the Ulan Bator railway is presented.

In order to extend the service life of electric machines traction rolling stock has been proposed recovery technology insulation using infrared energy, will improve the quality of insulation in terms of the breakdown voltage and hardness. This article analyzes and estimated of experimental studies conducted in two different meaningful of the work in this direction. Presents an analysis these works in terms of distinctive features and conclusions of the pilot studies. According to the analysis formulated a new hypothesis about the need to address when capsulating the insulation and its elasticity. Also set new directions for future research.

The article consider the mathematical model for integrated evaluation of the innovation cars operational efficiency in the freight traffic. Created the complex systems of freight rolling stock efficiency indicators of the innovation cars providing aggregate multiplicative effect of increase in productivity. Presents the calculations of the rolling stock productivity indicators model change from operation for one production cycle of innovation cars in the cargo movement. The executed in the article researches and received modeling results show that the rolling stock use efficiency in the cargo movement are consider into account of influence factors from the innovation cars implementation.

The article presents the results of research on the efficiency of the electric energy storage system in traction power supply on the example of one of the sections of JSC "Russian Railways". The results of measurements of electric values of electric rolling stock when moving along the railway section under study are considered. Based on simulation modeling, an assessment of the impact of power storage systems on the capacity of the railway section is obtained. Graphs of changes in the minimum travel interval and the minimum voltage on the current collector of an electric moving train depending on the power of the storage system, energy intensity, and threshold voltages for charge and discharge modes are constructed. An algorithm for the operation of the power storage system at a traction substation or linear device has been developed. Based on the simulation results, a graph of the degree of charge is constructed and a series characteristic is determined that allows maintaining the discharge depth at the level of no more than the specified one. Based on the results of calculations, the power, energy intensity and charging characteristics of the storage system are determined, which provide the required voltage level at the current receiver of an electric moving train within the boundaries of interstation zones.

The article deals with such important concept as the resonance to three cases: when rolling stock is described by a system of linear differential equations with constant coefficients, when the mathematical model of rolling stock represented a nonlinear system of differential equations, and when in the latter we take into account the multiplicative disturbance from railway, namely its non-equal-elasticity between sleepers. In this case, speak properly and correctly is not about a particular value of RMS-velocity, but on parametric instability areas.

The article describes the study of the mechanical characteristics of polymer insulation, in particular the hardness of the insulating lacquer layer with a different methods of drying it. The influence of the hardness and elasticity of the dried impregnating material on the reliability of the insulating structures during the operation of electrical equipment of the traction rolling stock is analyzed. A device has been created and presented that allows for a simple measurement of the hardness of the varnish film on a pre-selected object of study, which was the insulating finger of the bracket of the brush holder of an electric locomotive traction motor. The process of measuring hardness and results for three groups of insulating fingers are presented: insulating fingers without coating by an impregnating compound (press material); impregnating material, sealed by convective method; impregnating material baked by thermoradiation method. On the basis of the obtained practical results, the effect of the energy supply on the curing process when performing drying by the convective and thermoradiation methods is explained. Also presented are photographs of an electrically insulating lacquer layer from an electron microscope, which allow the microstructure to be evaluated for the presence of gas inclusions, which have a negative effect on both mechanical and electrical indicators of polymeric insulation. A study was made of the relationship between the parameter of electrical and mechanical strength. On the basis of experimental data, the dependence of the breakdown voltage on the hardness of the insulating lacquer layer was constructed.

An increase in the speeds of the electric rolling stock has an impact on the energy indicators of the operation of the traction power supply system. One of the technical solutions to the task of equalizing the traction load schedule to reduce voltage losses in the contact network is the use of electricity storage systems. The article presents the results of simulation modeling, which allow us to estimate the change in the energy indicators of an electric train with an increase in movement speeds for conditions of a single electric train following a section. According to the results of traction calculations, the influence of the voltage level on the electric train current collector on the technical speed is shown, the deviation of which for the typical voltage values in high-speed traffic is about 1%. For the selected section of rapid movement and technical speeds, the voltage level for traction calculations is justified. The dependences of the change in the average values of the load and the technical speed with an increase in the maximum speed up to 250 km/h are determined. Statistical estimates for the voltage on the pantograph of the Velaro RUS electric train are determined. The influence of the energy intensity of the onboard storage system with the corresponding charging characteristic on the reduction of maximum currents is shown. Dependences are obtained for the voltage drop on the electric train current collectors with an increase in movement speeds. The assessment of the maximum energy intensity of storage devices for the most severe operating conditions with a single electric train track on the site was carried out. These results allow us to determine the prospects for improving the method of calculating energy indicators and the use of accumulation systems in areas of rapid movement as on-board systems and compare their effectiveness with stationary systems based on simulation modeling, in which various control algorithms are implemented.

Features of the methods of calculation of a braking distance of the train applied now are considered. The main shortcomings of the most widespread method of definition of a braking distance on speed intervals are shown. Authors offered the new method of calculation allowing to consider critical parameters of process of braking (speed of a brake wave; character of an indicator diagram of the brake cylinder and mode of a brake; the actual initial speed for calculation of a way of action of brakes of the train). For verification of the offered method computer modeling is executed and the analysis of results of the different methods of calculation of braking length received at application is carried out. The new method allows to make calculation of braking length of the rolling stock more precisely.

The purpose of this work is to determine the causes of cracks in the frame of traction motors of electric locomotives. An analysis of the statistics of detecting cracks in the frame of NB-514 traction motors at the Eastern testing area is presented, showing that every third frame in operation has cracks. The method of mathematical modeling on a computer with the use of FEM was used. It is noted that carrying out measurements in the crack initiation zone by the tensometric method is practically impossible due to the geometry of the frame. The results of mathematical modeling of mechanical stresses arising in the frame of the NB-514 traction motor during its uneven heating to temperatures characteristic of the hourly mode of operation of the traction motor are considered. It is shown that mechanical stresses arising only due to the temperature difference between the ambient air and the windings of the main and additional poles of the traction motor can reach 100 MPa. Variants of changing the design of the ventilation windows of the frame are proposed to reduce the magnitude of temperature stresses with a constant area of the ventilation openings. When correcting the shape of the ventilation windows of the traction motor frame, these voltages can be reduced to 76 MPa. It was concluded that one of the main reasons for the formation of cracks in the frame of traction motors are cyclically repeating temperature stresses, which is especially important for electric locomotives operating on mountain pass sections in the pushing mode. It is noted that the appearance of mechanical stresses in the backbone of the traction motor also depends on vibrations arising from the path and operation of the gear train, as well as on the variable part of the magnetic field of the motor, which are not currently studied in detail.

The article studies comparing the effectiveness of using thermoradiation and convective drying methods insulation windings of electrical machines of traction rolling stock, impregnated with various modern varnishes and compounds at their factory and depot repair. Objective factors in the comparison methods are parameters such as temperature class, electric strength and cementing capacity. The author substantiates advantage thermoradiation method over convective.

The article considers phenomenological and modelling approach to researching of interaction of a deformable wheel and a plane of support, their advantages and disadvantages are mentioned. In the context of phenomenological approach the five methods of locomotive tangent tractive force calculation were considered. There certainly must be pseudo-creeping to let locomotive tangent tractive force do work and change the kinetic energy of a train in the point of wheel and rail contact. Locomotive tractive force experts calculate the power as product of the locomotive tangent tractive force and the velocity of translational motion of a train, although in fact the velocity of the point of force application must be assumed. It is applied to a wheel pair, then the velocity of this point must be used to calculate the locomotive power. According to this fact the locomotive power is found several tens of times reduced.

The calculation of the performance indicators of the traction power supply system in steady-state modes is focused on solving a wide range of tasks related to the choice of parameters of the power equipment of traction substations, the placement of linear equipment, the cross section of the contact suspension, the comparison of options for technical and economic indicators. Currently, the appearance of various regulated devices in the traction power supply system necessitates the improvement of calculation methods and algorithms used in various software complexes. In this paper, the issues of constructing substitution schemes for modeling the operation of the traction power supply system in steady-state modes, taking into account the devices for automatic switching on and off of the backup converter unit of the traction substation and the accumulation of electricity. The corresponding substitution schemes and fragments of calculation algorithms that take into account the characteristics and operating modes of these devices are presented. The use of the proposed substitution schemes allows us to take into account in the calculations the difference in the external characteristics of the converter units, to assess the compliance of the automation settings with the level of electric traction load and the effect of the device on the voltage level on the substation tires and in the contact network, the load capacity of traction substations, and for the accumulation device, taking into account the charging and discharge characteristics, to additionally assess the impact on the effectiveness of regenerative braking. The proposed algorithms of the devices are designed to improve the methods of calculating the indicators of the traction power supply system. The paper proposes an improved method for calculating the indicators of the traction power supply system, based on simultaneous traction and electrical calculations, based on the database of calculations performed for various conditions of electric rolling stock on the railway section.

The article proposes a method of using the mathematical apparatus of the theory of fuzzy sets in automation of the locomotives reliability management, because when writing algorithms there is a problem of transition from not fully formalized concepts of human communication to formalizing software. Examples of the fuzzy sets use in calculating the locomotives reliability are described. When calculating the reliability parameters manually, the volume of calculations does not allow you to move to more complex algorithms. When there are automated systems, it is necessary for each indicator of the transportation process, which affects its reliability, to set the function of belonging to a dangerous and normal value using the mathematical apparatus of the theory of fuzzy sets. Then the risk of a dangerous event will be assessed in probability, taking into account the logical claim to the risk.

In this article the problems of efficiency of functioning of production systems of the locomotive repair enterprise are solved. In particular, the object of research is the technological processes of repair and maintenance of electric locomotives at the enterprises for repair of traction rolling stock. The article presents a mathematical description of the production process of such enterprises, on the example of the service locomotive depot «Moskovka». The mathematical model is described on the basis of queueing theory (QS) and Markov chains. A graph of the technological state of the locomotive during repair in the depot, where the process of transition of the repaired rolling stock from the state to the state, i.e. the relationship of technological movements of the electric locomotive on the territory of the depot, as well as the time of technological operations described transition matrix. The distribution of repair requests is described by the Poisson law, the delay of the electric locomotive in the depot areas in the planned types of repair in accordance with the accepted norm, and in the unplanned form of repair, the applications are delayed in accordance with the distribution of erlang. Based on the results of the mathematical description of the model of the production process of the repair enterprise, a simulation model of the operation of the Moskovka depot was created, implemented on a computer with the help of professional software of a new generation - AnyLogic. The paper describes the logic diagram of the simulation model, selected methods and modeling libraries. According to the results of the study, the overall assessment of technological performance indicators of the locomotive repair enterprise, in the conditions of probabilistic, dynamic changes in the repair task. By means of the methods of research of technological processes of depot «Moskovka» realized in article, it is possible to design any repair enterprises on repair of a rolling stock of the railroads, for the purpose of identification of «bottlenecks» of production process.

One of the properties of the reliability of the power supply of electric rolling stock of railways is the trouble-free operation of the traction power supply system in various modes of its operation. For post-emergency and forced modes of operation of the traction power supply system, a decrease in load capacity is characteristic. In order to ensure the throughput and carrying capacity of the railway section by traction power supply devices, it is proposed to consider the use of electric power storage devices on electric rolling stock and in the traction power supply system. Studies conducted by domestic and foreign researchers allow us to evaluate the effectiveness of alternative solutions to improve the reliability of power supply, which include various options for the use of electric power storage devices on electric rolling stock and in the traction power supply system. This article presents the results of a review of these solutions, a simulation model of a traction power supply system and an electric rolling stock with power storage devices based on various batteries and a supercapacitor is proposed. Modeling of changes in the modes of operation of the traction power supply system is carried out taking into account the state control of switching devices. The calculation results allow us to estimate the voltage drop at the output of electric power storage devices, including taking into account the exponential zone of the discharge characteristics of batteries, to estimate the voltage change for a given electric traction load depending on the energy intensity of the storage device, made on the basis of the most common types of batteries and a supercapacitor.

The article assesses the influencing factors for electric power consumption for the needs of the electric locomotives of the 2ES6 series, statistical models for normalizing the electric power consumption for own power have been generated, and their quality has been assessed.

The article is devoted to continue presenting the results of experimental studies on the identifi-cation of rational modes of IR energy supply in encapsulation technology insulation windings of electric machines (EM) of traction rolling stock (TPS). In this paper, published the results of com-paring the effectiveness of the use of various oscillatory modes of infrared (IR) energy supply in the process of winding insulation encapsulation the frontal parts armature winding of the traction mo-tor type NB-514B electric locomotives series "Ermak" on the process plant at their depot and fac-tory repair. In studies to identify rational oscillating modes IR energy supply option duty cycle remained unchanged for the existing design of the generator of heat radiation technological installation, and changed only option cyclical, characterized by changing the speed of rotation of the armature trac-tion motor on the plant corresponding to 5, 25 and 50 Hz when the drive installation works from the frequency converter. The process of encapsulation was carried out first only short-wavelength radiation generated incoherent halogen emitters, then only at medium-wavelength radiation generated pulse ceramic radiators, and finally - with alternating heating medium short- and medium-wavelength radiation, i.e. with these two types of emitters in the spectral-oscillating mode IR energy, on which is currently obtained patent for the invention. For comparability of experimental studies same dose irradiation of segments frontal part of the armature windings of the traction motor type NB-514B electric lo-comotives «Ermak». Objective factors when comparing encapsulation modes to identify the most efficient are pa-rameters such as dielectric strength (the value of the breakdown voltage insulating tape) and ce-menting capacity.