Search results

When modeling the traction power supply systems, reflecting the processes of interaction of electric traction power supply and mobile electrical loads (electric and electric) is one of the elements of movement imitation organization trains in space. The effect of moving trains in simulations (MI) in MatLab on schedule at the analyzed site traffic necessitates sequential switching models of electric rolling stock (EPS) to the traction network, so that its effect is realized by moving the site. However, in this case, there really is not the processes taking place in reality. This is due to the realization of the simulation method of discrete movements, characterized in that the CSE, one located on a cell - the traction network model at one time, thereafter jumps to another. While EPS previous cell is switched off and switched on the next cell. Thus there does not exist in reality switching processes that distort the results of the studies. Methods to reduce the negative consequences of such distortions are addressed in this article.

This article contains results of experimental studies on the formation of corrosion products as a result of aggressive environment and electric currents action on the reinforced concrete structures. There are discussed a method of creating models with artificial electrocorrosion under conditions close to real working. The results of testing models using the X-ray method and modeling their strength characteristics are presented.

The results of the experimental study of the termal cycle of many-electrode welding of the solid wheel`s comb and its influences in work upon structurization in zone of the termal influence are presented.

In January 2022, a line of 2,000 cars formed at the Russian-Chinese border, waiting to be allowed to cross the state border [1]. The main reasons for the accumulation of a large number of vehicles at border checkpoints are restrictions on the movement of vehicles and cargo due to the difficult epidemiological situation, the lack of operational information interaction between transport organizations and regulatory authorities, insufficient capacity of the transport and terminal and logistics infrastructure. Consignors are switching to sending containers by rail, including the issue of piggyback transportation. In recent years, Russian Railways Holding has been actively developing a logistics service for the transportation of semi-trailers by rail, including in international traffic. Transportation of goods in piggybackers from the border provinces of the People's Republic of China towards the northeastern regions of Russia, where the transport infrastructure is poorly developed, difficult climatic conditions and irregular transport links, is an effective way to deliver goods to ensure an uninterrupted supply of the population of the region. As part of the strategy of the new Silk Road «One Belt - One Road» one can organize piggyback routes in the direction of Suifenhe - Grodekovo - Nizhny Bestyakh with the formation of the necessary cross-border terminal, logistics and transport infrastructure. The subject of this study is the analysis of the infrastructure of the Pogranichny railway checkpoint and the technological processes for organizing international piggyback transportation. The aim of the work is to develop a project for the infrastructure equipment of the terminal and logistics complex of the Pogranichny railway checkpoint for the organization of piggyback transportation. This paper uses theoretical research methods, including system analysis and information synthesis. By analyzing quantitative and qualitative indicators, operating technology and technical equipment of the Grodekovo station, the objects of the terminal and logistics infrastructure and issues that need to be addressed in the implementation of piggyback transportation were identified. The article presents the transport and technological schemes for the delivery of piggybackers, which are based on the functioning of terminal and logistics complexes, united by a single information space, and also considers the elements that affect the efficiency of organizing piggyback transportation. Transport industry experts predict a further increase in the volume of passage and transshipment of goods through the Far Eastern transport corridors, so the use of non-reloading transportation technologies and the implementation of the principles of «seamless» logistics will require reformatting the border terminal and logistics infrastructure with the introduction of digital services for the interaction of participants in international transportation.

The article deals with the organization of operation when using cryogenic technologies for gas locomotives and isothermal cars (IV). The structure of transportation of perishable goods (SPG) by types of rolling stock and types of cargo and the peculiarities of transportation of frozen fish from the Far East to the central regions of the country is presented. On the example of their consideration, a new structure of the type of isothermal rolling stock (IPS) is proposed, including various types of single isothermal cars, large-capacity refrigerated containers and swap bodies. It is proposed to use the block-modular principle of forming energy refrigeration equipment for promising autonomous refrigerated cars (ARC). A review of promising ARC models developed by UralVagonZavod and Altayvagon, ready for serial production, has been carried out. The factors that should be taken into account when creating an innovative isothermal rolling stock are formulated. Variants of using cryogenic technologies for an autonomous refrigerator car and single insulated cars are considered. Based on the results of previously conducted operational tests of autonomous liquid nitrogen cars, the main their advantages and possible areas of use are given. The technology and technical solutions for improving the design of the cooling system of the cargo space for thermos cars cooled with liquid nitrogen have been substantiated. The calculated characteristics of the consumption of liquid nitrogen during the transportation of frozen goods are presented. The advantages of using environmentally friendly liquid nitrogen cooling systems are analyzed and the areas of using cryogenic technologies for isothermal rolling stock are formalized. Uncertainty and spontaneity of the perishable goods transportation market, along with the absence of a large customer, poses a difficult task for car builders to organize serial production of isothermal rolling stock with small production volumes and various technical characteristics. Therefore, when creating isothermal and refrigerator cars, it is advisable to focus on a single universal car kit based on an isothermal body with the possibility of transforming it by using various options for energy refrigeration equipment and chassis.

A method to an assessment of influence on the expenditure of electrical energy for traction of trains, parameters of graphic time-table in the conditions of using the regenerative braking is being considered in the article. The retrieval of version with the minimal using of energy is based on the modeling of graphic time-table by different train-to-train intervals in the conditions of burst-mode access’ organization on the railway section. By results of modeling it is proposed to represent the derived dependence by changing of electrical energy’s expenditure on parameters of graphic time-table in the form of analytic function of several variables n-order forthe following using by normative plotting of movement for the purpose of curtailing electrical energy’s expenditure for traction on the trains.

The article deals with the organizational features of the Federal law of the Russian Federation on "transportation security compliance requirements to ensure transport security objects (buildings, structures), not related to transport infrastructure objects and located on land adjacent to transport infrastructure objects in the security zones of land transport. Systematized the activities required for the implementation of such transport facilities. In the work used techniques of systems analysis, comparative method, methods of theoretical knowledge (formalisation), obshhelogicheskie methods and techniques of research (analysis, synthesis, classification, the analogy).

The article considers the peculiarities of the transport network ports on the Baltic sea, the problems of optimization is to increase cargo turnover and the challenges associated with the modernization of the transport complex of Russia

The article is about defining corrosion state of overhead structures underground part. Specially designed concrete models are used for experiments and calculations. These models are made with the fabric technology of overhead structures creation. «Steel - Concrete» interface region parameters are calculated with a help of transient process which situated when DC power supply is connected to the scheme. There is a formulas and a methodic for calculation needed parameters. In the end of the article theoretical curve is located. It exactly coincides with an experimental curve.

The traffic speed increasing on the railways makes strict requirements to the supporting and supporting structures of the contact network, as well as to the parameters and indicators of the contact suspension. The presence of dry friction in the cantilever attachment points indicates a negative effect on the accuracy of adjusting the wires of the contact suspension and on its parameters. The article presents the results of studies of the dry friction value in the console fastening points depending on the type of the contact suspension and suggests a method for reducing friction in the console attachment points. The results of calculations of the effect of friction in the console attachment points on the tension variation along the length of the anchor section are presented.

The operational reliability of the electrification and power supply system and the associated traffic safety is mainly determined by the technical condition of the contact network-an element that is extremely difficult to reserve in any way. The state of the contact network devices of the East Siberian railway is indirectly characterized by periods of electrification of sections. The equipment of the contact network, put into operation in the 1960s and 1970s, has developed its design life, does not have the required load capacity enough and reduces the reliability of the electrified section. The article shows that the purpose of improving the reliability of electrical equipment in the operation of power supply devices is to predict the state of its elements, in particular the metal supports of the contact network, as an object of study. Correctly assess the state and resource of the contact network devices will allow the use of the latest diagnostic systems by personnel in practice, using mathematical apparatus and modeling methods. It is shown that by monitoring various parameters characterizing the support, it is possible to detect a change in the technical condition of the object of study in time and to carry out maintenance in the period of time when there are deviations of parameters beyond unacceptable limits. The statistical data on the state of the support economy at the VSZHD are summarized, the main types of damage to metal support and supporting structures are given. It is shown that new types of damage to metal structures, not classified earlier, are revealed, that qualitative and quantitative assessment of the state of metal supports of the contact network, which have various structural damage is possible using methods, modeling, simulation and evaluation of the state of structures. FEMAP, an independent computer-aided design system from Siemens PLM, is used as an independent full-featured environment for modeling, simulation and evaluation of the results of the analysis of the characteristics of metal supports of the M6/10 model

The paper deals with the protection of the buried structures under the influence of DC traction network stray currents. The paper presents an algorithm for joint operation of drainage units for simultaneous protection of the grounding grid and two isolated underground conductors with priority protection of the grounding grid. The proposed algorithm of joint drainage protection of buried structures allows providing the possibility of optimal protection: simultaneous keeping of the protective potential of buried structures with the minimum required drainage current, which allows reducing energy costs, reducing corrosion damage and extend the operating life of buried structures.

For a radical solution of the issue of extending the service life of wheelsets of the freight cars, it is proposed to weld not only serviceable wheels, but also wheels to be pressed against an unacceptable rim thickness. It is shown that in multilayer surfacing, the possibility of obtaining high quality metal becomes more difficult, and heating of a thin rim can have an adverse effect on the gap between the inner surfaces of the wheels. The purpose of the work is to optimize the technological parameters of the multi-electrode surfacing mode, determine the amount of warpage of the wheel disk and study the quality of the deposited metal during operational tests of wheel sets. Experimental surfacing was carried out on the optimal parameters of the multi-electrode process, and a method for measuring the value of wheel warping in conditions of multilayer surfacing was proposed. The results of studies on the influence of the multi-electrode surfacing process on the metal structure and wheel warping are presented. It is shown that under the optimal surfacing mode, favorable conditions are created for obtaining fine-grained structures in the near-seamed zone. Field tests of the freight cars wheel sets were carried out to determine the efficiency and reliability of the method of automatic multi-electrode surfacing of the wheel rim. The task of the tests was a comparative assessment of the resistance of the wheels under study to defects and wear. The implementation of the task involved obtaining data for the wheel sets being researched on the number of cases of wheel failure due to the insufficient quality of the welded surfacing metal. It was found that wheel warping does not cause any dangers that threaten traffic safety, and the weld metal has the necessary resistance to cracking under the action of operational loads.

The purpose of the work is to analyze and assess the structure of economic development and the impact of the «economic space» on railway transport in Uzbekistan, to consider the use of container block train technology. Scientific methods of analysis and synthesis, classification, mathematical statistics, economic analysis, mathematical technical modeling are used. The following results were obtained. The dynamics of the development of cargo transportation in Uzbekistan is assessed on the basis of GDP data. The volume of provided transportation and the use of modes of transport by the volume of shipped products is considered. Of these, the number of goods shipped in Uzbekistan from railway transport, the dynamics of the volume of transportation of certain types of cargo in containers. According to the dynamics of the growth of cargo transportation, a decrease in growth was revealed in 2020 and associated with the pandemic, but in general there are steady growth rates. It is concluded that along with the ongoing work on the renovation and reconstruction of railway tracks, it is necessary to take measures to optimize the entire chain of cargo transportation by containerization, so the use of block train technology. The practical significance of the results of the study follows from the fact that the analysis of the development of transport infrastructure revealed a sharp decline in the results of transport at the end of 2019 - 2020 due to the pandemic, but at the same time, there is a reduction in the «economic space» by improving transport infrastructure, simplifying transit and customs clearance procedures, increasing transit volumes and regional trade, therefore, the logistics transportation market in the republic will grow at an accelerated pace in the coming years. Mass use of containers with the use of block train technology, so. the collection of containers from the port rear terminals, where the formation of batches of containers takes place, and their accumulation in the volumes required by the buyer for transportation by rail can also be a solution to the identified problems.

The article deals with the issues of improving the model of interaction with customers through the introduction of digitalization projects in the sphere of freight rail transport, describes the changes in the main functions of the company's divisions and technological aspects. The technological and economic effects of the development and implementation of freight transport digitalization projects on the example of improving the digital platform of interaction with customers are determined. The model of CRM-system implementation of transport services digitalization is worked out, investments on its development and implementation are defined. The main categories of risks with the greatest direct impact on the effectiveness of the new model implementation of interaction with customers are considered. The digital platform of interaction with the client allows to carry out the order of freight transportation service by rail without any additional financial and technological expenses connected with obtaining the qualified electronic signature, to simplify the organization of contractual work to obtain services and payments for them.

The paper deals with the influence of stray currents on underground metal structures located near the traction rail network. The paper presents a system consisting of a traction rail network, a grounding grid and two isolated underground conductors located under the stray currents influence caused by electrified railway transport. Analytical expressions for the calculation of the distribution of electrical quantities in underground structures with their mutual influence were obtained. The expressions were obtained using Hartley integral transform, which in contrast to the Fourier transform allows carrying out integral transformations only with real-valued functions. The obtained expressions allow determining the zone of dangerous influence of stray current and can be used in the design of underground structure protection.

Examined the effect of oil pollution on the ballast bed of the railway track, namely, the effect of oil and oil products on the following functions performed by the ballast bed: maintenance of the rail-sleeper grid, perception of loads from rolling stock, filtration of melt and rainwater. Ballast oil pollution leads to an increase in its distribution in the environment. Oil and oil products have a strong negative impact on the environment, which leads to degradation of vegetation. The causes of oil contamination of the ballast bed, which lead to disruption of its functions, are determined. Attention to increasing the humidity of the ballast in the wintertime, which leads to freezing of the ballast and an increase in the stiffness of the path. Considered a method for cleaning gravel with a gravel-cleaning machine and revealed shortcomings. Studies of the effectiveness of washing oil-contaminated ballast gravel with O-BISM detergent in the absence of mechanical influence on the sample, as well as with the use of barbation and mixing of the sample. The optimal technological mode of application of the washing solution is established. Proposed an option for improving the cleaning of ballast gravel from oil products with a gravel-cleaning machine to solve the problem of efficiently cleaning the ballast gravel from oil pollution, which will solve the problem of crushed stone reuse and utilization.

The article deals measures to improve the efficiency of using empty cars on the example of the East Siberian railway. The problem of the mechanism for managing cargo and empty runs has been identified. It is necessary to create the system for managing empty rolling stock. The authors consider the technology of working with the company's empty car fleet and the logistics of rolling stock through the Taishet station of the East Siberian railway. The relevance of the goal is the insufficiently developed transport and logistics infrastructure of the region located at the intersection of large transport flows, high costs of logistics operators for the empty tariff. Taking into account the prospects for the development of the station's transport and logistics infrastructure in accordance with the long-term development program of Russian Railways, there are opportunities to increase the range of types of rolling stock and cargo, including container ones. This technology, with timely provision of empty rolling stock for stations, will significantly increase the level of loading and unloading and routing of incoming empty cars. The practical significance of the considered measures is the possibility of reducing the load of some stations, reducing empty flights of rolling stock, increasing the profitability of transportation and the efficiency of using rolling stock by reducing its turnover. In General, for the network, the results will increase the capacity and transit volumes of container traffic from China to the Russian Federation, and stimulate the development of the transport business.

One of the priority areas of economic development of the Far East Region is focused on the communications with the countries of the Asia-Pacific Region. The region is crossed by the largest railways, such as Trans-Sib and Baikal-Amur, which have an access to the Far East seaports that promotes the growth of international trade operations and the increase of the transit traffic in the region. An expansion of transport and economic relations of our country in the Far East Region, the implementation of a considerable number of extractive industry programs ​​ within Baikal-Amur Region, the development of the sea ports of the Far East Region will cause the growth of the workload on the rail infrastructure that is impossible without its development and modernization. An important role in the transport process belongs to the technical stations, which handle all transit trains traffic. Therefore, at the current state, the consideration of the aspects of choosing the rational variants of railway transit nodes’ development with allowance for the environmental factors is timely.

In the course of scientific support of design, construction and operation, as well as forecasting the development of transport infrastructure in the Arctic region, RUT (MIIT) scientists have proposed a methodology for working out new design and technological solutions by testing them on a small section of the route that has received the status of experimental; a number of solutions have been proposed that can be taken into account and used during the development of transport infrastructure in the Arctic. To verify the university's developments, a number of expeditions were undertaken to study the features of the conditions of construction of transport facilities, including climatic and engineering-geological, as well as the condition of existing transport facilities (the Salekhard - Igarka Polar Highway): survey expeditions in 2005, 2012; joint expeditions with the Russian Geographical Society with the participation of scientists from the Institute of Roads, Construction and Structures of the Russian Institute of Transport (MIIT) in the Arctic region in 2019 - 2021, during which a geomonitoring network was organized; data on temperatures in the air, near-surface zones and in the ground environment were obtained; the analysis of the ground environment was carried out; recommendations were given on the specifics of the construction of transport facilities, including the construction of the roadbed, using different variants of technical and structural and technological solutions. The purpose of the article is to generalize the experience of the development of the northern territories through the development of transport communications and the testing of new structural and technological solutions for the construction of the roadbed by means of a local section of the highway in the status of a pilot site. The approach presented in this article can be used to form a methodology for solving the problem of creating an effective High-latitude Russian transport system in the Arctic zone of the Russian Federation with forecasting trends in its development.

The object of the research is the solid rocks massif containing the Kuznetsovskiy tunnel with a length of 3890 m, the greatest depth of the deposit is 355 m, which crosses the mountain pass section of Sikhote-Alin on the Komsomolsk-Sovetskaya Gavan line of the Far Eastern Railway. The aim of the studies was a detailed analysis of the engineering and geological conditions of the facility and their impact on construction and operation. These data are obtained as a result of field research, laboratory testing of physical and mechanical properties of rocks, evaluation of water flow to drainage structures and analytical calculations. The massif is composed by terrigenous rocks - a rhythmic interlayering of heterogeneous grained sandstones, siltstones, gravelites, conglomerates, that are classified as strong. Layering has a steep drop and a sublatitudinal strike, deviating from the axis of the tunnel by 20 - 60 °. The tunnel axis is crossed by a system of faults of various capacities, their total capacity is 334 m, which is 8.5% of the length of the tunnel. The fault zones are associated with increased fracturing, reduced stability, in places abundant water inflows that have peaks in the summer, the threat of landslides, intense silicification and sulfide mineralization. The obtained monitoring materials by methods of recording natural pulses of the electromagnetic field of the earth (NPEFE) (EEMEMP) and dipole electromagnetic profiling (DEMP) allowed to draw a conclusion about the real picture of the development and forecast of the rock pressure, as well as the dynamics of the groundwater entering the mine for safe construction and operation. The state of the geodynamic conditions of the mountain massif is characterized as stable. Available data can be used as a starting point for assessing and forecasting aspects of the construction and operation of the second stage of the tunnel.

The article deals with the issues of analysis and risk assessment of the operation of the logistics infrastructure of Russian Railways. The relevance of the article is determined by the practical orientation and significance of the issue relevant to the operation of the facilities of JSC “Russian Railways”. The aim of the article is to develop a risk assessment algorithm based on the statistics available to JSCo Russian Railways. The subject of research is the risks arising during operation. The object is the logistics infrastructure of Russian Railways. An analysis approach is considered and a risk analysis algorithm is proposed taking into account the specifics of the operation of logistics facilities using statistical and expert assessments.

In the context of the sanctions policy of Western countries the main economic partners of Russia and consumers of commodity flows are the countries of the Asia-Pacific region (APR). According to the results of 8 months of 2022, the trade turnover between the Russian Federation and the People's Republic of China (PRC), according to the General Customs Administration of the People's Republic of China, increased by 31,4 % and amounted to $ 117,2 billion [1]. The People's Republic of China borders on the southern regions of the Russian Far East - the Amur Region, the EAO, the Primorsky, Zabaikalsky and Khabarovsk Territories. There are 9 border checkpoints located in the Khabarovsk Territory: air, river, mixed, automobile, sea, which makes it possible to form new multimodal transport routes for the delivery of foreign trade goods. The purpose of the work is to consider alternative options for multimodal transportation of foreign trade cargo flows through the transport network of the Khabarovsk Territory and transshipment points of the Amur Basin. The objectives of this study are: analysis of the volume of foreign trade turnover between Russia and China, development of technological schemes for the transportation of containers in the direction of «river ports of China - Khabarovsk River Port (RF) - land transport - western regions», consideration of promising routes for the transportation of foreign trade goods through cargo and passenger checkpoints «Pokrovka - Zhaohe» and Bolshoy Ussuriysky Island of the Amur swimming pool. The subject of this study is the transport and logistics infrastructure of international multimodal routes of the Amur Basin. In this work, theoretical research methods are used, including system analysis and synthesis of information. The article examines the characteristics of the terminal and logistics infrastructure of the Amur Basin river ports, the dynamics of container transportation by river transport from the ports of China to the terminals of the Khabarovsk River Port, gives a feasibility study for the organization of a permanent customs control zone at the Khabarovsk II station, and also describes the advantages of using the Pokrovka - Zhaohe border checkpoint as an element of an alternative multimodal container transportation routes. In the final part of the work, a description of the simulation model of the operation of a mixed (automobile-river) checkpoint in the presence of customs and transit terminals for assessing the capacity of border checkpoints of the Far Eastern District is presented.