Search results

A modern solution to the problem of improving the efficiency of the traction rolling stock maintenance and repair processes based on the use of new information technologies is the transition to a locomotives predictive repair promising system. The key element of the predictive repair system in the issue of operational assessment and management of the locomotives technical condition are onboard microprocessor control systems with built-in diagnostic, monitoring and monitoring subsystems. The onboard microprocessor control systems have the ability to carry out continuous or discrete measurement, registration, transmission and accumulation the values of large package analog and discrete locomotive equipment parameters. The functionality of the onboard microprocessor control systems based on information technologies makes them an exceptionally effective means of efficiently organizing maintenance and repair impacts on the locomotive park in order to ensure specified operational reliability and performance indicators.

Considered the features of modern automatic control systems of pantographs. The spectral density analysis of pantograph contact force at high speeds showed requirements for robust control systems, which allows to significantly improve the quality of the current collection. Proposed the ways to improve the automatic control systems for pantographs, aimed at improving the speed and reducing the inertia of the system.

The account of a real technical condition of the equipment of the locomotive at planning of volumes of its repair is one of the major reserves of reduction of working costs of railways and decrease in the cost price of transportations. The continuous control of a technical condition of the locomotive in operation is carried out with use of stationary and onboard means of technical diagnostics. The increasing of operational profitability and reliability of diesel locomotives demands continuous control for a technical condition of their equipment in the service. The wide-band exhaust gases oxygen content sensor can be used for continuous monitoring of the air excess coefficient in the locomotive diesel engine cylinders. This type sensors are widely used in automotive diesel engines control systems. It means for indirect estimation of the engine cylinders mixture quality by the exhaust gases oxygen content.

The experience of the electrification of railways around the world. Performance of existing electric railways, and also performed calculations show that the use of electric traction has high efficiency and can improve the operational performance of the Ulaanbaatar Railway.

In article presented the mathematical model of fuel heating of the high pressure pipeline of diesel engines fuel equipment and calculation results of temperature of its external surface at various temperatures air and the fuel equipment technical conditions.

On the basis of experimental data thereis a mathematical model in thisarticle. Its made from the registration options in acfual operation mode of the locomotive. This mathematical model describes the technical condition of the locomotive and evaluates the parameters and characteristics. Considerable attention is paid to complex state operation of the facility. In dealing with the mathhematical model it’s defined the main locomotive operation indicator.

The article presents an analysis of the costs of various fuel and energy resources inJSC “Russian Railways” for the period from 2013 to 2017, results the observations on the reduction of the share of diesel fuel in the total resource consumption structure, the analysis of the distribution of the number of failures of diesel locomotive nodes along the route, the distribution of failures of the cooling system nodes along the route and the distribution of failures of diesel locomotive , the values of power consumed to drive the fan of the refrigerator shaft, various diesel locomotives. Calculated fuel flow ratespent on the drive of the fan of diesel locomotives.

The article presents the results of research on the efficiency of the electric energy storage system in traction power supply on the example of one of the sections of JSC "Russian Railways". The results of measurements of electric values of electric rolling stock when moving along the railway section under study are considered. Based on simulation modeling, an assessment of the impact of power storage systems on the capacity of the railway section is obtained. Graphs of changes in the minimum travel interval and the minimum voltage on the current collector of an electric moving train depending on the power of the storage system, energy intensity, and threshold voltages for charge and discharge modes are constructed. An algorithm for the operation of the power storage system at a traction substation or linear device has been developed. Based on the simulation results, a graph of the degree of charge is constructed and a series characteristic is determined that allows maintaining the discharge depth at the level of no more than the specified one. Based on the results of calculations, the power, energy intensity and charging characteristics of the storage system are determined, which provide the required voltage level at the current receiver of an electric moving train within the boundaries of interstation zones.

The subject of the article is automated locomotive control functions on the example of electric locomotives in order to assess the current stage of development of the intellectual functionality of on-board control systems. The literature often talks about creating a «smart» or «digital» locomotive. However, it is more correct to talk about the introduction of cybernetic systems with feedback. Such systems were on the locomotive from the very beginning of their appearance and were designed to automate steam control, later to control automatic brakes. These automation systems were mechanical and pneumomechanical. With the advent of electric locomotives, electrical automation systems based on electrical devices, relay circuits are being introduced, which are eventually replaced by diode, transistor control circuits. Later, digital and analog chips were used. The current stage of automation development is associated with on-board microprocessor control systems. The author proposes to divide the intellectual functions of the locomotive into seven directions, for each of which to evaluate their implementation: train driving, drive and brake control, diagnostics, collection of emergency circuits, ensuring train safety, managing the comfort of the locomotive crew. The entropy of the space of intelligent functions is proposed to be estimated according to the modified Shannon formula, where, in addition to the probability of the function being in demand for one trip, the degree of automation of the control process is taken into account. As a result of the analysis, it is shown that the intellectual functions of the locomotive developed already in the 19th century, today the degree of their implementation can be estimated at 60 %, and full implementation can be expected by the middle of the 21st century. The calculation results are summarized in two tables and one dynamic graph. It is concluded that an "intelligent" locomotive is a stage in the evolutionary development of automated locomotive control systems.

When modeling the traction power supply systems, reflecting the processes of interaction of electric traction power supply and mobile electrical loads (electric and electric) is one of the elements of movement imitation organization trains in space. The effect of moving trains in simulations (MI) in MatLab on schedule at the analyzed site traffic necessitates sequential switching models of electric rolling stock (EPS) to the traction network, so that its effect is realized by moving the site. However, in this case, there really is not the processes taking place in reality. This is due to the realization of the simulation method of discrete movements, characterized in that the CSE, one located on a cell - the traction network model at one time, thereafter jumps to another. While EPS previous cell is switched off and switched on the next cell. Thus there does not exist in reality switching processes that distort the results of the studies. Methods to reduce the negative consequences of such distortions are addressed in this article.

A theoretical and practical study of gondola cars equipped with various models of trucks: 18-100 and 18-9810. Compiled design scheme, system of differential equations and bringing its solution for different types of trucks. The analysis of the solutions of this system are found depending on the amplitude of the pitching and bouncing speed carriage movement. Found dynamic forces on the one spring group. Based on the comparison of the two bogies conclusions about the benefits of truck 18-9810.

The article is devoted to the analysis of the quality of materials for the manufacture of fasteners for rolling stock. The paper presents the results of studies of parts destroyed during operation that are used for fastening the undercarriage assemblies, spring suspension and impact-traction devices of rolling stock. The purpose of the work is to establish the probable causes of the destruction of parts under the action of static and dynamic loads during movement on the track. The paper describes the methodology and sequence of examination of materials based on the analysis of the chemical composition of metals, the assessment of mechanical properties and the study of the surfaces of fractures of parts. The results of spectral analysis of the metal of the investigated parts, measurements of hardness and analysis of the surface of fractures of the parts are presented, which allowed to establish the possible nature, sequence and causes of their destruction. The results obtained in the course of the research showed that the main reason for the breaks in the fasteners of rolling stock is the impact on them of loads exceeding the tensile strength of the metal. It was found that the brand used in the production of metal does not meet the requirements of the normative-technical documentation for the product and is not intended for the manufacture of fasteners. Thus, the findings confirm the need to tighten the quality control of materials used in the manufacture of fasteners for rolling stock, and can be used in machine-building enterprises specializing in the production of components and spare parts for railway rolling stock. The main conclusion of the work is the need to use in the production of fastening parts of the responsible components and assemblies of rolling stock, structurally reasonable steels and alloys.

The methodology of calculation of the maximum weight of the composition of wagons.The calculation of the maximum weight of the composition of freight trains and wagons locomotive 2TE116 electric 2ES5K under the Ulaanbaatar Railway.Presented by the rationale for the choice of an electric series for Ulan-Bator Railway.

The article deals with such important concept as the resonance to three cases: when rolling stock is described by a system of linear differential equations with constant coefficients, when the mathematical model of rolling stock represented a nonlinear system of differential equations, and when in the latter we take into account the multiplicative disturbance from railway, namely its non-equal-elasticity between sleepers. In this case, speak properly and correctly is not about a particular value of RMS-velocity, but on parametric instability areas.

The use of twelve-pulse rectifiers instead of six-pulse rectifiers leads to increased efficiency and efficiency of traction substations of the underground. On the basis of experimental research and analysis of circuit solutions, the conclusion is made about the advantage of a twelve-pulse rectifier circuit of a serial type over parallel-type circuits. The use of rectifiers with a parallel type circuit is possible only if there is an equalization reactor, without which technical and economic indicators are reduced. The introduction of the most rational twelve-pulse bridge rectifier schemes of the sequential type can be carried out by upgrading the installed equipment, or by industrial development by manufacturers of dry transformers with different typical power and rectifiers with tablet avalanche valves with coolers based on heat pipes.

The article presents the results of a study of the effect of the functional relationship between the parameters of the microgeometry of the brake disc surface and the level of the stress-strain state of the contact area on the thermal resistance coefficient. The results of an experimental study of the process of changing the step and altitude parameters of the microgeometry of the surface of the brake disc under the influence of normal and tangential forces realized during friction are obtained. It was found that under the influence of normal and tangential forces, the height parameters of the microgeometry tend to increase, and the step parameters tend to decrease. It is shown that when calculating the contact thermal resistance, it is necessary to take into account the functional relationship between the geometric parameters of the microroughness of the brake disc surface and the level of the stress-strain state of the contact area. The calculations performed without taking into account this connection lead to overestimated values of the contact thermal resistance and, accordingly, to errors in determining the values of heat fluxes passing through the contact area of the mating surfaces. The values of the constants, which depend on the design features of the friction unit of the disc brake and are used to determine the nature of the change in the geometric features of microroughnesses, have been specified. The correction of the input parameters of the microgeometry of the surface of the brake disc is performed, taking into account the dynamics of changes in their geometry under the influence of force loading. It is shown that it is advisable to take into account the dynamics of changes in the surface microgeometry in the analytical determination of the contact thermal resistance of a disc brake. The results obtained are recommended to be used in calculating the friction characteristics and assessing the heat fluxes passing through the area of mutual contact of the brake disc and brake pads of the disc brake.

The article presents a comparative analysis of the effectiveness of automated systems for recording the work parameters of autonomous locomotives. The relevance of the use of such systems is due to the prevention of defects at the stage of identifying possible malfunctions during the operation of locomotives during the inter-repair periods. So the used systems of parametric diagnostics of power plants of autonomous locomotives are considered. Also, for comparison, the experience of foreign research on the use of a diesel locomotive monitoring system is presented. Despite the fact that the existing automated systems for registering the parameters of diesel locomotives have a wide range of functionality that allows you to obtain typical dependences of the power of a diesel generator set (DSU) on temperature and pressure, these systems do not take into account the peculiarities of the flow of in-cylinder processes that can significantly affect the power of the DSU. The article proposes a method for monitoring and adjusting the power of the diesel engine during operation by registering the operating modes of the equipment and determining the actual power of the diesel engine by expanding the range of diagnostic parameters by installing additional sensors for registering measured values for the accuracy of monitoring and tuning the diesel engine and making timely decisions on maintenance and repair of locomotives. A block diagram of the recorder of operating modes with the location of sensors for measuring informative parameters and a diagram of connecting the recorder to the power circuit using the example of a shunting diesel locomotive CHME3 is shown. Software has been developed that can be additionally installed in the standard automated system for registering the parameters of the operation of the CHME3 diesel locomotive with subsequent data processing.

The paper describes a mathematical model of gas-dynamic movement through the through defects in the body of the boiler tank cars. The mathematical model allows to take into account the processes of gas flow at low pressure drop and the impact of the level of roughness of the inner surface of the through channel formation jet escaping gas. The comparison of the results of theoretical modeling and experimental studies of the velocity of the gas flow and temperature under different conditions. The study identified the laws of gas flow through a series of classic models through defects. Shows the dependence of the temperature of the escaping gas flow from the exhaust velocity and the level of roughness of the internal surface of the through channel, which allows us to estimate the nature of gas flow and temperature gradient. The obtained results allow to adjust the level of sensitivity to rejection temperature during thermal leakage control boilers railway tanks.

The article deals with the cooling and heating of individual components and assemblies diesel engines at low ambient temperatures. The more attention is paid to the description of the characteristics of the intensity of the cooling water system of diesel locomotive engines. The article presents the results of investigation of the outdoor temperature , operating conditions of load and no-load on the cooling system of. The parameters of the cooling water and engine oil that characterize the thermal conditions of the diesel engine. We reviewed and analyzed various ways of warming systems, diesel engines using airborne and stationary devices. The work is aimed at improving the efficiency of diesel locomotive at warming by reducing the operating time of the diesel engine is idling.

The aim of the work is to study and evaluate the energy efficiency of regenerative braking of an electric locomotive when a freight train is moving at an unsteady and steady speed, to determine the degree of influence on the return of electricity of various factors, first of all, the mass of the train, the speed of movement, resistance to movement, the steepness of the slope of the track profile, driving conditions, the efficiency of traction motors and the needs of an electric locomotive own needs. Also, the purpose of the study is to develop recommendations for improving the energy efficiency of regenerative braking of an electric freight locomotive. Methods used: mathematical analysis, methods of traction calculations and energy balance. The equations of the energy balance of the movement of a freight train and its components in the mode of regenerative braking are considered, which make it possible to identify the main factors affecting the return of electricity at unsteady and steady speed. The calculated dependences of the return of electricity during regenerative braking of an electric locomotive with loaded and empty freight trains consisting of 71 four-axle cars, when moving with reduced speed and constant speed on sections of track with slopes of different steepness, characterizing the influence of individual factors on the return of electricity during regenerative braking of an electric locomotive, are obtained. It is shown that the specific return of electricity during regenerative braking of an electric locomotive with a loaded freight train weighing 7100 tons when moving with a decrease in speed on a track section with a zero profile is approximately the same as with a steady speed of movement on descents with a steepness of 6 ...7 ‰. The specific return of electricity during regenerative braking of an electric locomotive with an empty freight train weighing 1775 tons when moving with a decrease in speed on a track section with a zero profile is approximately the same as with a steady speed on descents with a steepness of 11 ‰ or more. The conditions under which the maximum return of electricity is achieved during regenerative braking of electric freight locomotives are determined. Recommendations have been developed to improve the energy efficiency of regenerative braking of electric freight locomotives.

The paper is mathematical description, which allows to evaluate the properties of the system at the stage of theoretical development. A model of the anti-vibration suspension system with linear adjustment, which allows to study the dynamic characteristics of vibration isolation system threads compensation rigidity. The results of simulation program Matlab.

Comparative bench tests of acoustic emission occurring during the interaction of the brake pad with a brake disc for the brake unit with a stationary brake pad and a brake unit with a floating brake pad are carried out. The floating brake pad, depending on the braking conditions, occupies an optimum position on the surface of the brake disc, while making movements of an oscillating nature around the turning axis that does not pass through its center of mass and parallel to the axis of rotation of the brake disc. The frequency range is determined in which there are noticeable differences in the acoustic emission of a brake unit with a floating brake pad and a stationary brake pad. The theory of fuzzy sets is used to analyze the acoustic emission perceived by the human hearing organs, which accompanies the interaction of the surfaces of a friction pair in the investigated frequency region. The results of a comparative analysis of the noise characteristics of the brake blocks under investigation are discussed. The spectra of the acoustic emission power are compared according to the obtained base of the expert evaluation of the noise power perceived by man.

The article describes the study of the mechanical characteristics of polymer insulation, in particular the hardness of the insulating lacquer layer with a different methods of drying it. The influence of the hardness and elasticity of the dried impregnating material on the reliability of the insulating structures during the operation of electrical equipment of the traction rolling stock is analyzed. A device has been created and presented that allows for a simple measurement of the hardness of the varnish film on a pre-selected object of study, which was the insulating finger of the bracket of the brush holder of an electric locomotive traction motor. The process of measuring hardness and results for three groups of insulating fingers are presented: insulating fingers without coating by an impregnating compound (press material); impregnating material, sealed by convective method; impregnating material baked by thermoradiation method. On the basis of the obtained practical results, the effect of the energy supply on the curing process when performing drying by the convective and thermoradiation methods is explained. Also presented are photographs of an electrically insulating lacquer layer from an electron microscope, which allow the microstructure to be evaluated for the presence of gas inclusions, which have a negative effect on both mechanical and electrical indicators of polymeric insulation. A study was made of the relationship between the parameter of electrical and mechanical strength. On the basis of experimental data, the dependence of the breakdown voltage on the hardness of the insulating lacquer layer was constructed.

It was shown that during operation, under the influence of high alternating loads is change of physical and mechanical properties of the metal, which leads to decrease in toughness. New method for estimate residual resource of components freight cars railway transport is presented. This method is based on the study of structural changes metals during their exploitation. On the basis of monitoring structural changes in metals during their exploitation may be developed effective system estimate of residual resource.

An increase in the speeds of the electric rolling stock has an impact on the energy indicators of the operation of the traction power supply system. One of the technical solutions to the task of equalizing the traction load schedule to reduce voltage losses in the contact network is the use of electricity storage systems. The article presents the results of simulation modeling, which allow us to estimate the change in the energy indicators of an electric train with an increase in movement speeds for conditions of a single electric train following a section. According to the results of traction calculations, the influence of the voltage level on the electric train current collector on the technical speed is shown, the deviation of which for the typical voltage values in high-speed traffic is about 1%. For the selected section of rapid movement and technical speeds, the voltage level for traction calculations is justified. The dependences of the change in the average values of the load and the technical speed with an increase in the maximum speed up to 250 km/h are determined. Statistical estimates for the voltage on the pantograph of the Velaro RUS electric train are determined. The influence of the energy intensity of the onboard storage system with the corresponding charging characteristic on the reduction of maximum currents is shown. Dependences are obtained for the voltage drop on the electric train current collectors with an increase in movement speeds. The assessment of the maximum energy intensity of storage devices for the most severe operating conditions with a single electric train track on the site was carried out. These results allow us to determine the prospects for improving the method of calculating energy indicators and the use of accumulation systems in areas of rapid movement as on-board systems and compare their effectiveness with stationary systems based on simulation modeling, in which various control algorithms are implemented.