17-27Now the problem of development of the high-speed and high-speed movement on the main railway transport that is connected by increase of traffic safety of trains and ensuring reliable work of contact suspension brackets and current collectors of an electrorolling stock is actual. For increase of reliable work of current collectors there are some ways one of which is creation of the safety devices which are built in a design of current collectors and providing their automatic lowering in emergencies. In Omsk State Transport University the current collector equipped with safety devices of new generation on the basis of the operated pneumatic devices and providing protection at failure or the increased wear of contact elements, and also breakages of a runner is developed; at rise on height of more admissible at departure of an electrorolling stock for the sign «End of a Contact Suspension Bracket» or break of contact wires; at blows and arrivals on obstacles in a contact suspension bracket. For control and management of operation of safety devices the protective pneumatic contour located on the basis of a current collector in the special case is used. At operation of one of safety devices there is a depressurization of the pneumohighway of a protective contour therefore pressure of compressed air the drive of a current collector decreases and it falls under the influence of own gravity. Restoration of a current collector possibly only in the conditions of depot or point of maintenance of locomotives. Calculation of characteristics and parameters of the device of protection at blows and arrivals on obstacles in a contact suspension bracket needs to be carried out by the given technique for zones of normal, dangerous and emergency work. For an assessment of operability of safety devices and definition of their main technical indicators and parameters in laboratory of OSTU the shock and oscillatory complex is developed for research of interaction of a current collector with a contact network.
88-101The traffic speed increasing on the railways makes strict requirements to the supporting and supporting structures of the contact network, as well as to the parameters and indicators of the contact suspension. The presence of dry friction in the cantilever attachment points indicates a negative effect on the accuracy of adjusting the wires of the contact suspension and on its parameters. The article presents the results of studies of the dry friction value in the console fastening points depending on the type of the contact suspension and suggests a method for reducing friction in the console attachment points. The results of calculations of the effect of friction in the console attachment points on the tension variation along the length of the anchor section are presented.