Search results

The work is devoted to the consideration of the possibility of using composite materials with an aluminum matrix in the design of electric transport pantographs. Currently, there is a tendency to increase the speeds of electric transport. This fact requires reliable and high-quality current collection, which can be achieved by reducing the mass of the current collector design, including through the use of composite materials. The possibility of using composite materials in parts and assemblies of current collectors operating under conditions of increased current loads and at high speeds of movement and the mechanical characteristics of the traditional ones used in the carriage design and the composite materials proposed for use are analyzed. The design of a carriage of high-speed electric rolling stock has been developed, in which an aluminum matrix composite material was used as a structural material. Statistical modeling using the finite element method in the SOLIDWORKS Simulation software package was performed. Comparison of the strength characteristics of carriage assemblies made of traditional materials and aluminum matrix composite showed the possibility of reducing their weight in the case of composite use without reducing the strength of structural elements. The static characteristic of the carriage in which the composite material was used coincides with the static characteristic of the carriage made of traditional materials, which confirms the possibility of using an aluminum matrix composite without making significant changes to the carriage design. To evaluate the dynamic characteristics of the composite carriage and its effect on the dynamic characteristics of the pantograph, modeling was carried out using the methods of multibody modeling of SOLIDWORKS Motion. The obtained simulation results indicate an improvement in dynamic characteristics when using composite materials, which has a beneficial effect on the reliability and quality of current collection.

This article describes developed «Collector-brush heat» pc-application », which is aimed to automatically process thermal images, received during thermos-vision of DC machine collector-brush unit. This application allows to calculate the thermal rate and to build collector-brush heating curve. The application is developed in order to apply it in the traction drive diagnostics hardware-software complex.

The article deals with the problem of diagnosing the technical condition of the collector-brush unit of DC motors. The topicality of this problem in the engines operating on the railway transport, which are in the most severe operating conditions, is particularly noted. These studies are aimed at improving the reliability of diagnosing the technical condition of the collector-brush unit through the use of a new method of diagnosing the condition of collector DC motors’ commutation. The proposed method of diagnosis is based on a new principle of processing diagnostic information about the spark pulses under the brushes. The article presents the histograms of the distribution of the pulses' intensity of different sections of the armature winding. The research conducted an experiment using a digital control device that allows to identify and digitize a useful diagnostic signal from multipolar brushes with a high sampling rate and transfer it to a computer. Analysis of the experiment’s results showed that the average value of the pulse’s area increases with increasing the spark’s intensity. Nevertheless, severe sparking at the collector leads to the law of distribution becomes double-modal, and as a result, dramatically increases the standard deviation of the values of the pulses’ areas. Described effect makes misinformation in the diagnosis procedure using the parameters of the laws of distribution of the spark’s intensity. The proposed method of diagnosis allows to eliminate this effect. The copyright for a new method of diagnosing is protected by a patent.

A method for predicting the performance of the current collection with increasing speeds using machine learning is proposed. Methods for obtaining statistically reliable data on the contact pressure of current-carrying electric rolling stock without the need for direct measurement based on design data and analysis of external factors (weather, operational) accompanying the interaction are considered.

The article outlines modern approaches to determining the maximum permissible continuous current of current collectors when stopping and in motion. The features of techniques that reliably take into account operational factors when conducting tests in laboratory conditions are considered. A mathematical model is given for studying the distribution of current load in emergency mode of breaking a current-carrying shunt.

The article deals with the issues of joint use of a low-temperature solar collector and a heat pump in a solar heating system, the combination of which allows for high energy efficiency and stable operation of the system for the entire period of the year. The study and development of innovative technologies in alternative energy is a topical issue of today. Based on the actual statistical climatic data of the city of Omsk, a thermal calculation of the solar collector and the air heat pump in the heat supply system of the building was made. The values of solar insolation and the angle of inclination for the city of Omsk by months determined depending on latitude are given, the dependence of the change in solar insolation of the city of Omsk on the period of the year is plotted. The proposed scheme allows creating high energy efficiency and stable operation of the system during the summer and transitional months of the year. A method for calculating the generation of thermal energy using a combined system is given. The required number of tubes of solar vacuum tubular collector SVK-20A has been calculated. The work of an air heat pump and a solar collector according to a bivalent scheme is proposed, and a graph of the heat load of the heating system is also considered. The thermophysical properties of the working substance of a solar collector and an air heat pump are studied with a change in ambient temperature, the dependence of the freezing point of aqueous solutions of ethylene glycol and propylene glycol on the mass concentration of glycol is studied. A technical calculation of the COP coefficient for one of the educational buildings of OSTU was made. An effective option for using this system is proposed - heating systems «warm floor», «warm walls» or «warm ceiling».

The article describes the design features of the current collection system of the Moscow monorail and revealed its shortcomings, limiting the possibility of increasing the speed of electric rolling stock. The features of a promising new generation of monorail transport system with increasing speed (up to 150 km / h), the message "city - the airport," which is proposed to use the contact current collection system with flat working surfaces of the current collector and the current lead. The aim of the work was to develop measures and technical solutions for improving the current collectors to provide reliable, cost-effective and environmentally-friendly electric power transmission on board the electric rolling monorail transport systems. The proposed technical solutions have allowed to increase the average life of the contact elements of the current collectors of electric rolling on the active sites of the Moscow monorail from 30 days to 5 months. A preliminary design and manufactured model sample collector rolling device for the new generation of monorail transport system with increased speed. A basic model of the pantograph, which allows to unify all the major components and spare parts for the current collectors of options for different speeds, load current, and other operating conditions and choose the appropriate model, taking into account technical and economic feasibility. The results can be used for the improvement of existing and development of new designs for current collectors of electric rolling monorail transport systems for the high speeds.

The article presents the relevance of the use of sources of low-potential, secondary thermal energy, as well as a method for calculating the dependence of the propylene glycol temperature on the depth of a single-well coaxial collector, with constant values of the parameters of the geothermal well. The proposed methodology of the geothermal reservoir, allows to determine the optimal depth of the well, in which the increase in the temperature of propylene glycol in practical terms does not change, respectively, further drilling becomes economically inefficient.