Search results

The results of the investigations on the evaluation of efficiency use of the diesel locomotives UzTE16M4 in the mountainous direction Kumkurgan - Tashguzar of the Uzbek railways track by of the movement goods trains with stops and without any stops on the spaces station are presented.

The article discusses the specifics of the locomotive reliability indicators use in the Russian Railways. Examples of locomotive reliability indicators and the indicators used in the Russian Railways in the conclusion of service contracts, including under the life cycle contract are given. A method of transition from national standard to Russian Railways has been proposed. It is concluded that these procedures can be automated.

The article includes research results of analyzing and evaluating 3ТЕ10М diesel locomotive`s efficiency on a hilly-mountainous direction Marokand-Navoi of Uzbekistan railways while hauling freight trains with and without stopping on through stations (division points).Main parameters of basic movement work of researched UzTE16M3 diesel locomotives are shown as tabled values and graphic dependencies,also equations of organizing necessary calculations mentioned above in accepted range of mass variation are marked here.

This article describes the standard field reduction system of traction electric motors of a contactor-resistors type using inductive shunts, its drawbacks are revealed. An improved field reduction system of traction electric motors of an AC locomotive based on IGBT transistors has been developed and proposed. The proposed solution will allow to exclude the copper-containing inductive shunt from the power circuit, while providing reliable protection in non-stationary operating modes of the electric locomotive, as well as reduce electricity consumption for train traction. To prove the advantages of the proposed the field reduction system of traction electric motors, a method of comparative analysis of electromagnetic processes of the mathematical model of the standard and proposed systems of the field reduction of traction electric motors of an electric locomotive obtained in the MatLab Simulink environment was applied. As a result, it is proved that the implementation of the field reduction systems of traction electric motors using IGBT transistors with the developed control algorithm provides an increase in the power factor of an electric locomotive on average by at least 4%, and also significantly reduces the ripple current of the traction electric motor.

The experience gained in the operation of high-voltage vacuum circuit breakers VBO-25-20/ 630UHL1 indicates an incorrect assessment of the mechanical resource of its individual components and elements. Despite the repeated improvement of the design of the main switch drive, applicable both as part of the new «Ermak» series locomotives starting from number 1000 series, and in earlier numbers, the dynamics of malfunctions continues to persist to the present time. One of the most important elements of the main switch is a latch designed to hold the elements of the drive mechanism in the on position, the failure of the latch entails the failure of the entire section of the locomotive. The article considers three latch upgrades previously proposed by the manufacturer, a kinematic scheme of the drive with a vacuum arc-extinguishing chamber of the switch is developed, the parameters of the preload and trip springs in the drive are calculated, the forces operating during operation are determined. On the example of the latest modernization of the latch using the finite element method in the SolidWorks Simulation software package, a strength calculation was carried out, according to the results of which the stresses arising in its design were determined. As a result of the analysis of the finite element model, the forces critical for the structure are determined, a graph of the dependence of the structural strength margin and the maximum stress in the structure on the acting forces is developed. According to the results of the study, the force at which the most favorable value of the safety factor is provided is determined, for which it is proposed to reduce the critical force by changing the parameters of the compression springs and disconnecting the drive of the arc extinguishing chamber. A loading diagram with the drawing dimensions of two modified springs has been developed.

The subject of the research is the power thyristor converter of AC electric locomotives and its influence on the power factor of the locomotive. A new method for increasing the power factor of AC electric locomotives with thyristors power converters is proposed and analyzed. These electric locomotives include locomotives of the 2ES5K, VL85, EP1 series, etc. At the initial of the paper, the existing methods of increasing the power factor are briefly considered and their disadvantage in comparison with the proposed method is indicated. The drawback of existing converters is also analyzed, which consists in the presence of a thyristor opening delay at the beginning of the supply voltage half-cycle. The proposed method implies the modernization of the control circuits of the thyristors of the converter, due to which, at the beginning of the half-period, a control current is spontaneously created on the control electrode by means of the supply voltage. As a result, the thyristors open with a minimum delay after the start of the half-cycle. To verification the effectiveness of the proposed solutions, a computer simulation of the operation of the power circuit of an electric locomotive in the ORCAD program was carried out. Simulation was carried out for two options: a power circuit with standard converters and a power circuit with converters upgraded in accordance with the proposed method. During the simulation, the change in the value of the power factor of an electric locomotive was investigated at different currents of traction motors, zone and angle of regulation. Analysis of the oscillograms of converter various arms currents the revealed that when using the modernized converters, the moment of the end of the network switching occurs earlier than in the standard circuit. There is also no area with negative voltage at the output of the converter at the beginning of the half-cycle. At the end of the paper, the values of the electric locomotive power factor are given under various conditions. These results show that the use of the proposed method increases the power factor of an electric locomotive by an average of 1.2 percentage points.

In article the possibilities of decrease in energy consumption on draft at the movement of electric trains in the conditions of a flat profile of West Siberian Railway due to shutdown of traction section of an electric train and rational distribution of time of the course in all direction of the movement are considered. During the calculating and creation of schedules of the train for site is used an analytical method of the solution of the differential equation of the movement of the train. For the analysis of optimum schedules of the train at each stage of their modeling an inspection of calculations which allows to guarantee reliability of the received results is car-ried out. For definition of potential opportunities of decrease in energy consumption on draft at traffic control of an electric train the concrete trip of an electric train of ED4M along a route Omsk - Irtyshskaya is analysed. Settlement schedules of an electric train are provided in the considered trip, and also with shutdown of one traction section. Average is defined by standard means of system of computer modeling on the way the electric train speed, dispersion of speed on the way, energy consumption. The received size of energy consumption for draft with the disconnected traction section is much less than energy consumption on a real trip. Rational distribution of time of the course of the electric train in all direction of movement from a condition of preserving time of its arrival also allows to reduce an electric power expense on draft by the terminal station. Based on consumption data of the electric power in general possible economy of energy costs on draft due to application of the offered methods is determined by Omsk TCh-31 depot.

Offers a probabilistic model of formation of modes load of diesel-generator unit locomotives given the power of auxiliary units in conditions of their operation on the example of locomotives 2TE10M.

The article discusses the possibility of determining the specific fuel consumption of diesel locomotives in operation using indirect calculation methods based on the use of these locomotive onboard systems and supplementing them with mathematical models of the operating cycle and the model for determining the composition of the exhaust gases of a diesel engine. The basic equations and algorithms proposed for the implementation of such a method of mathematical models and the results of their use are presented, the results of a comparison of simulation results and experimental data on the specific consumption of fuel of diesel locomotives TEM18DM are presented. A possible algorithm for their joint use is proposed, conclusions are made on the possible development of such a method for determining the energy efficiency of diesel locomotives without taking them out of service.

This article describes different ways of mass-burned fraction curve calculation, shows the Pugachev’s combustion rate equation structure, method of this equation factors selection and simulating versus experimental data matching.

Wearing parts of the cylinder-piston group and crank mechanism is one of the main reasons for putting a diesel engine into repair. Timely detection of the occurrence of intense wear allows you to prevent negative consequences, make timely repairs, eliminate the likelihood of unplanned exit of the locomotive from service. As a result of the study of the intensity of accumulation of wear products in engine oil, a mathematical model has been developed, which is implemented with the use of an artificial neural network apparatus. Its use allows to carry out an operational assessment of the technical condition of diesel engine parts in an in dividing way and to improve the technological process of repairing diesel engines of the D49 type

The introduced results of the investigation by valuation of efficiency the employment of the locomotives of the diesel (the diesel locomotives 3TE10M, UzTE16M3) and of the electrical (the electric locomotives 3VL80S) tractions in the plainly direction of railway track by the method of averagin design values. Modified average significances main indicator move working of the investigations of the diesel locomotives 3TE10M, UzTE16M3 of the evaluation mind numeral and table facts, and also graphic arts dependences, representative oneself arithmetical mean value with taking into account of the movement goods trains without any stops and with stops on the spaces stations, passing - tracks and divides points, which have received in the result to uses of the traction calculation for different conditions organization of the goods movement. Designate equations for organization calculation values mention exponents in the accepted range changing of the masses trains

Introduced on the Russian Railways network monitoring system download the snow train has allowed to identify cases of export volume of the snow mass is much less possible when cleaning railway tracks from snow, which leads to the underutilization of capacity of the snow trains and shunting locomotives and irrational use of fuel and energy resources for operation of rolling stock. The purpose of the work is to consider the fuel and energy efficiency of snow-removal trains and shunting locomotives carrying out their movement and to determine ways to reduce the consumption of fuel and energy resources for the performance of works on cleaning the tracks from snow (in economic traffic). To achieve this goal, one of the structural divisions of JSC "Russian Railways" estimated the volume of snow removal by snow-removal trains, calculated the values of mechanical work performed by locomotives to move snow-removal equipment and fuel consumption by snow-removal trains and locomotives to perform work on clearing snow from the tracks. On the basis of the comparative analysis the conclusion is made on the available reserves of increase of fuel and energy performance of the rolling stock while clearing paths of snow and the technique allowing to estimate the total fuel consumption for snow removal snow plow trains and traction units (locomotives), and ways to improve the power efficiency of snow-removing trains and working with them traction means, such as the use of rolling stock with a rational value of mass and power depending on weather conditions.

The article includes research results of substantiation 3ТЕ10М diеsel locomotive`s movement work parameters on a hilly-mountainous direction of railway while moving freight trains with stops and without any stops on the spaces stations and separating points

The article proposes a method of calculation the load between the rolling bodies of the swinging bearings and the bearings of the traction motor, which makes it possible to have the value of the radial clearance in the bearing, as well as the radial movement of the inner rings relative to the outer one. To determine the load perceived by the most loaded rollers, a solution of the equilibrium equation for internal elements is proposed using simple iterations. The implementation of the method is implemented in the Matlab software package. Using the proposed method, the load distribution between the rollers in the traction motor of the VL11K electric locomotive was calculated. To determine the load acting on the bearing, the “Sarga-Subic” section was selected, which has a mountain profile.

The development of the system is accompanied by the diagnostics of their achievement in the technical system. Using the possibility of identifying defects in nodal technical systems in the early stages of their occurrence in order to timely and promptly anticipate, the emergence of work productivity, identify simple repair time, identify material costs for replacement or deep restoration. Railway transport is also at the stage of a wide identification of various components and parts of the rolling stock. the appointment of diagnostic systems is a locomotive fleet, as a more identified technical unit. Today, the locomotive fleet uses hardware and software diagnostic complexes, microprocessor-based diagnostic systems, on-board and track monitoring systems that cover the entire range of diagnostic data of the main technical units. However, the use of the availability of systems requires constant improvement of the mathematical model of diagnosis. One of the options for choosing diagnostic models is the use of artificial intelligence research methods - sections of artificial neural networks, which, in comparison with the classical polynomial regression properties, are manifested by the properties of extrapolation accuracy and are applicable for predicting the values of diagnostic parameters according to the data that were due to the sampling of an artificial neural network. These characteristics make it possible to predict the development of defects and possible failures safely and accurately to obtain them and obtain an economic result. The paper presents an example of the development of a diagnostic artificial neural network model for diagnosing oil starvation of motor-axial bearings of the wheel-motor block of a cargo mainline electric locomotive of the 3ES5K «Ermak» series. This factor has a low level of reliability, so the use of continuous diagnostics is required, which requires the use of a point in time.

The possibilities of improving speed and reducing the time of passenger trains on the Trans-Siberian railway, including through new passenger locomotives EP1, EP2K, EP20.

The paper describes the physical nature of the occurrence of disturbing forces in traction gears during intermating teeth and determination of the amplitude-frequency content of the spectrum. In addition, the experimentally determined defects arising elements locomotive traction gearing.

The article consider the mathematical model for integrated evaluation of the innovation cars operational efficiency in the freight traffic. Created the complex systems of freight rolling stock efficiency indicators of the innovation cars providing aggregate multiplicative effect of increase in productivity. Presents the calculations of the rolling stock productivity indicators model change from operation for one production cycle of innovation cars in the cargo movement. The executed in the article researches and received modeling results show that the rolling stock use efficiency in the cargo movement are consider into account of influence factors from the innovation cars implementation.

A modern solution to the problem of improving the efficiency of the traction rolling stock maintenance and repair processes based on the use of new information technologies is the transition to a locomotives predictive repair promising system. The key element of the predictive repair system in the issue of operational assessment and management of the locomotives technical condition are onboard microprocessor control systems with built-in diagnostic, monitoring and monitoring subsystems. The onboard microprocessor control systems have the ability to carry out continuous or discrete measurement, registration, transmission and accumulation the values of large package analog and discrete locomotive equipment parameters. The functionality of the onboard microprocessor control systems based on information technologies makes them an exceptionally effective means of efficiently organizing maintenance and repair impacts on the locomotive park in order to ensure specified operational reliability and performance indicators.

The article presents an analysis of the costs of various fuel and energy resources inJSC “Russian Railways” for the period from 2013 to 2017, results the observations on the reduction of the share of diesel fuel in the total resource consumption structure, the analysis of the distribution of the number of failures of diesel locomotive nodes along the route, the distribution of failures of the cooling system nodes along the route and the distribution of failures of diesel locomotive , the values of power consumed to drive the fan of the refrigerator shaft, various diesel locomotives. Calculated fuel flow ratespent on the drive of the fan of diesel locomotives.

The experience of the electrification of railways around the world. Performance of existing electric railways, and also performed calculations show that the use of electric traction has high efficiency and can improve the operational performance of the Ulaanbaatar Railway.

The methodology of calculation of the maximum weight of the composition of wagons.The calculation of the maximum weight of the composition of freight trains and wagons locomotive 2TE116 electric 2ES5K under the Ulaanbaatar Railway.Presented by the rationale for the choice of an electric series for Ulan-Bator Railway.

The subject of the article is automated locomotive control functions on the example of electric locomotives in order to assess the current stage of development of the intellectual functionality of on-board control systems. The literature often talks about creating a «smart» or «digital» locomotive. However, it is more correct to talk about the introduction of cybernetic systems with feedback. Such systems were on the locomotive from the very beginning of their appearance and were designed to automate steam control, later to control automatic brakes. These automation systems were mechanical and pneumomechanical. With the advent of electric locomotives, electrical automation systems based on electrical devices, relay circuits are being introduced, which are eventually replaced by diode, transistor control circuits. Later, digital and analog chips were used. The current stage of automation development is associated with on-board microprocessor control systems. The author proposes to divide the intellectual functions of the locomotive into seven directions, for each of which to evaluate their implementation: train driving, drive and brake control, diagnostics, collection of emergency circuits, ensuring train safety, managing the comfort of the locomotive crew. The entropy of the space of intelligent functions is proposed to be estimated according to the modified Shannon formula, where, in addition to the probability of the function being in demand for one trip, the degree of automation of the control process is taken into account. As a result of the analysis, it is shown that the intellectual functions of the locomotive developed already in the 19th century, today the degree of their implementation can be estimated at 60 %, and full implementation can be expected by the middle of the 21st century. The calculation results are summarized in two tables and one dynamic graph. It is concluded that an "intelligent" locomotive is a stage in the evolutionary development of automated locomotive control systems.

The article presents a comparative analysis of the effectiveness of automated systems for recording the work parameters of autonomous locomotives. The relevance of the use of such systems is due to the prevention of defects at the stage of identifying possible malfunctions during the operation of locomotives during the inter-repair periods. So the used systems of parametric diagnostics of power plants of autonomous locomotives are considered. Also, for comparison, the experience of foreign research on the use of a diesel locomotive monitoring system is presented. Despite the fact that the existing automated systems for registering the parameters of diesel locomotives have a wide range of functionality that allows you to obtain typical dependences of the power of a diesel generator set (DSU) on temperature and pressure, these systems do not take into account the peculiarities of the flow of in-cylinder processes that can significantly affect the power of the DSU. The article proposes a method for monitoring and adjusting the power of the diesel engine during operation by registering the operating modes of the equipment and determining the actual power of the diesel engine by expanding the range of diagnostic parameters by installing additional sensors for registering measured values for the accuracy of monitoring and tuning the diesel engine and making timely decisions on maintenance and repair of locomotives. A block diagram of the recorder of operating modes with the location of sensors for measuring informative parameters and a diagram of connecting the recorder to the power circuit using the example of a shunting diesel locomotive CHME3 is shown. Software has been developed that can be additionally installed in the standard automated system for registering the parameters of the operation of the CHME3 diesel locomotive with subsequent data processing.