Search results

In this article, the currently existing methods for determining such a technical parameter as the sliding friction coefficient were considered. The coefficient of friction is one of the main parameters characterizing the operation of tribological pairs of any engineering system. Stable and efficient operation of tribological pairs in such systems, along with high strength and fatigue characteristics, are not only the basis of safety, but also a promising direction in terms of economic benefits in the design and operation of various devices and systems. Accordingly, this area of research is very relevant for the railway industry, and for railway rolling stock in particular. This is caused by a large number of friction pairs in different nodes of passenger and freight cars, locomotives, ensuring safe and uninterrupted movement of rolling stock as a whole on iron drogs. Tribological processes are important both directly during movement and during braking processes. In this matter, the factor of determining and analyzing the sliding friction coefficient comes to the fore. One of these friction pairs is the «pad-wheel» system, which is the executive body of the braking system of a railway train. Optimization of contact in this system is one of the determining factors for the growth of braking efficiency during braking, increasing the working life of the elements of the friction pair, reducing the likelihood of defects. The search for new approaches to the study of friction issues is a direct catalyst for scientific and technological progress in the engineering industry.

The article analyzes the current state of electricity measuring on the electric rolling stock. The main shortcomings of the existing electric power measuring systems for train traction are shown. The technical requirements for information-measuring systems of electricity accounting on electric rolling stock are presented. The technology of electricity accounting on the rolling stock with the use of information-measuring complexes and the procedure for processing the measurement results are described. The minimum required list of fixing parameters during the trip is determined. The procedure for calculating the electric power consumption of electric rolling stock within the boundaries of an arbitrary electricity metering zone is given. The prospects of application of the proposed developments on the railway network are considered to provide monitoring of the transportation process energy efficiency.

The article deals with measures to improve the energy efficiency of the transportation process. The necessity of creation of an automated system for monitoring the energy efficiency of the electric rolling stock. The algorithm, which allows to determine the reasons for non-locomotive crew specific rules of electricity on the trip. Developed form of protocols, reflecting the information on losses of electricity on the basis of a trip with the time and place of their origin.

In the context of the objectives of and compliance with transportation of corridors for rolling stock and improving the technology of transportation of different modes of transport considered minimization of the geometric factor in positioning navigation, peculiarities of determination of errors of coordinate of the moving objects along physically fixed trajectories on the plane, it is proved the statement about the possibility of recovery of the trajectory of the mobile point on the plane with continuous or discrete measurements of one coordinate.

This paper deals with the determination of the coordinates of the rolling stock for the railway station. Proposed and justified the use of mathematical tools of conformal mappings. The results of the experiment are shown.

Paper is devoted to the development of an improved algorithm for calculating the traction power supply system for further practical implementation in order to improve the accuracy of calculations of the traction power supply system by combining traction and electrical calculations with considering the current train situation. The relevance of the task is due to the need to improve the accuracy of calculations of throughput and carrying capacity under the conditions of power supply devices with considering the criteria for energy efficiency of the transportation process. The available solutions to this problem in the form of ready-made software systems and algorithms are considered. A numerical experiment was carried out for the DC section in the program "Complex of calculations for traction power supply", which showed that the relative error that determines the convergence of traction and electrical calculations is from 1.6 % to 5.1 %. The main reason for the discrepancy is the insufficiently correct calculation of the voltage at the current collector of the electric rolling stock. An improved algorithm for calculating the traction power supply system is proposed. The distinguishing feature of this algorithm is the implementation of a clarifying full traction calculation before compiling instant schemes and instant electric and traction calculations. As a result of the research, a general algorithm for joint traction and electrical calculations with considering the parameters of railway sections and the current training situation has been developed,. A conclusion about the advantages of the proposed algorithm and promising directions for further research is made.

The national program of socio-economic development of the Far East in the period to 2024 and a term until 2035 [1], approved September 24, 2020, provides for the modernization of the transport infrastructure of the Eastern site of "Russian Railways", in 2021 carrying capacity which should reach 144 million tons and by 2025, capacity will be increased to 182 million tons. In addition, the program provides for the implementation of measures to increase production capacity of the far Eastern seaports and development activities in the Arctic region and the Northern sea route as competitive Intercontinental transport corridor for cargo between the ports of the Asia-Pacific region and the European Union. to ensure the passage of promising volumes of cargo traffic, it is necessary to resolve issues that hinder the effective functioning of the far eastern transport hubs. Currently, the railway infrastructure of transport hubs has a maximum load. In 2018, the unloading of cars that arrived as part of block trains at the port stations of the Far Eastern Railway amounted to 994.46 thousand cars, while loading amounted to 426.88 thousand cars. Such a disparity in the volume of loading and unloading of goods leads to the accumulation of a large number of empty rolling stock at the port stations of the Eastern Polygon of railways, which must be sent for loading at the stations of the western direction. the released rolling stock occupies the tracks of the station and the port, thereby making it difficult to perform shunting work and limiting the station's ability to receive loaded cars. The purpose of this study is to develop proposals for the organization of work with empty car traffic at the eastern railway landfill. This requires to solve the following tasks: to analyze the workloads of the stations and the far Eastern sea ports interaction technology to all the traders in the transportation process, to develop actions on the organization of work of the regional logistics center with the empty wagons, to determine the economic efficiency of the activities. An important areas of work of the regional logistics center of the Far Eastern Railway is to improve the technology of working with the released rolling stock and the organization of a transport and logistics system for the accelerated return of empty gondola cars to the loading station. This paper presents an organizational scheme of interaction between rolling stock operators and management units of Russian Railways to regulate the movement of empty rolling stock. To improve the efficiency of operating the car fleet, it is necessary to organize an operational exchange of information between various owners of rolling stock, the regional logistics center of the Eastern polygon and the unloading station, which should consolidate the car traffic to form a special empty route. the conclusion of the study is to determine the potential economic efficiency of reducing the turnover of block train cars in the direction of «nakhodka-vostochnaya station-loading stations of the east siberian, west siberian and krasnoyarsk railways».

In this article made a scan of a current situation in electric power measuring on the rolling stock, proposed a concept of Global automatic electric power measuring system for rolling stock, stated technical requirements for modern electric power measuring systems for rolling stock.

Placement and fastening of freights, at their transportation by appointment to stations of the railroads Russian Federations, is made according to provisions of Specifications of placement and fastening of freights in cars and containers TsM - 943 (TU). Requirements of the TU separate points influence not only traffic safety of trains, but also the cost of transportation and as a result - JSC «RZD».

The article deals measures to improve the efficiency of using empty cars on the example of the East Siberian railway. The problem of the mechanism for managing cargo and empty runs has been identified. It is necessary to create the system for managing empty rolling stock. The authors consider the technology of working with the company's empty car fleet and the logistics of rolling stock through the Taishet station of the East Siberian railway. The relevance of the goal is the insufficiently developed transport and logistics infrastructure of the region located at the intersection of large transport flows, high costs of logistics operators for the empty tariff. Taking into account the prospects for the development of the station's transport and logistics infrastructure in accordance with the long-term development program of Russian Railways, there are opportunities to increase the range of types of rolling stock and cargo, including container ones. This technology, with timely provision of empty rolling stock for stations, will significantly increase the level of loading and unloading and routing of incoming empty cars. The practical significance of the considered measures is the possibility of reducing the load of some stations, reducing empty flights of rolling stock, increasing the profitability of transportation and the efficiency of using rolling stock by reducing its turnover. In General, for the network, the results will increase the capacity and transit volumes of container traffic from China to the Russian Federation, and stimulate the development of the transport business.

The article deals with the issue of the interaction of the track and rolling stock and the relationship of factors affecting the comfort of passengers. Examples of passenger comfort indicators are given and possible causes of deviations in the track geometry are considered. The results of experimental trips are analyzed and the data obtained by standard diagnostic tools are presented. Natural irregularities in the plan and profile were constructed in the analyzed areas where comfort indicators were exceeded. The data presented demonstrate the use of an additional indicator of the interaction of the track and rolling stock, which is advisable to take into account to identify deviations in the geometry of the track gauge when carrying out work on the current maintenance of the track, since there are irregularities or combinations of irregularities in the track that have an increased dynamic impact. It is worth noting that currently not all irregularities are registered, and accordingly such irregularities are not eliminated. Using the «passenger comfort» indicator calculated from the accelerations occurring in the elements of the rolling stock, it is possible to determine the places and deviations of the geometry of the track gauge that affect the dynamic characteristics of the rolling stock, causing increased comfort indicators.

The article shows the relevance of the problem of noise pollution of the environment by railway transport. The purpose of the research is to assess by calculation and instrumental methods the compliance of the existing noise levels in the residential area near the railway tracks with sanitary standards, to propose a set of noise protection measures and to substantiate their acoustic efficiency. The applied methods for measuring and calculating the equivalent and maximum noise levels of the rolling stock comply with the requirements of regulatory documents. The authors took into account the features of the propagation and shielding of sound waves in the existing residential area, background noise, and the traffic intensity of trains of various categories. The results of measurements, calculations and estimates of the noise generated by the rolling stock in the residential area in Omsk are presented. A significant excess of the maximum permissible equivalent and maximum noise levels in residential areas has been established. Comparison of the calculated and measured noise values, taking into account the standard uncertainty of the calculation methods and the expanded measurement uncertainty, showed quite satisfactory convergence of the results obtained and confirmed a significant excess of the sanitary noise standards. A set of measures is proposed to reduce the noise of railway rolling stock at the source of its occurrence and on the path of its propagation in the existing residential area. The dimensions of the embankments of the two sections of the railway tracks allow the installation of screens of low height up to 38 cm, the geometry of which is designed so that, in terms of reflection of the noise emitted by the rolling stock, they are at least equivalent to a standard noise protection wall 2 m high. For the track section located in the recess, it is proposed to install a noise barrier 6 m high and at least 1 km long. Its acoustic efficiency was calculated.

Resistive heating of the pantograph head due to the flow of traction current through the conductive elements of the upper node, has an uneven distribution along the frame structure and depends on the location of the contact wire on the insert. The aim of the work is to develop a mathematical model for calculating power losses in the pantograph panhead, allowing to estimate its value, taking into account the zigzag of the contact wire during the movement of electric rolling stock. The subject of the study is the pantograph panhead. The paper gives an example of calculating the frame skid of a pantograph equipped with carbon strips. Experimental studies of the current distribution over the shunts of the panhead depending on the position of the contact wire were carried out in February 2021 in the laboratory "Designs of contact networks, power lines and current collection devices" using a complex for testing current collection devices. The calculation of the heating power of the panhead is determined by the Joule-Lenz law. The results of the calculation showed that the maximum heating power is observed when the contact wire is in the middle of the panhead, while the places of the greatest losses located along its edges are above the places where the shunts are attached. The model makes it possible to obtain a functional dependence of the heating value along the panhead. The obtained results of the skid heating power distribution make it possible to supplement the complex model of the thermal state of the pantograph developed at the Omsk State Transport University with the participation of the authors of the article. The versatility of the developed model makes it possible to investigate various zigzags of the contact wire and evaluate the effect on the distribution of traction current along the panhead, depending on the location of the shunts and their number.

To improve the accuracy of the diagnosis of the technical condition of rolling stock, it is necessary to develop new algorithms for the digital processing of signals coming from sensors at the time of the passage of the axes of wheeled pairs of wagon carts during the uniform movement of the train on the straight section of the railway track. The use of modern mathematical application software packages to model digital-based data processing algorithms reduces the cost and time of developing automated systems to diagnose the technical condition of the rolling stock of railways. To assess the accuracy of the fixation by the magneto-induction sensor of the moment of passage of wheel pairs axly, an asthigmatic model is proposed, allowing to investigate not only the energy properties of the sensor, but also the shape of the output signal, taking into account the real dimensions of its magnetic core. The developed model allows you to classify the pore. The developed model allows to classify the order of astigmatism model magnetoinduction sensor based on a set of discrete virtual sensors

The method of determining the costs of technological time of processing trains en route has been improved, taking into account the duration of all operations performed by wagons at stations for the effective organization of freight transportation technology on railway transport. A model for calculating the delivery time of goods has been developed to correctly determine the time spent by loaded wagons en route. A method has been developed for determining the time spent on technological operations at stations and the delivery time of goods. The developed method allows you to determine and plan in advance the amount of work that will be performed at the stations. The indicators affecting the duration of the time of delivery of the cargo are given. An improved formula for determining the delivery time of goods by rail is recommended. The article proposes a technology for calculating the daily mileage rate of wagon shipments, depending on the technological operations performed with wagons at stations and the distance of transportation. The reliability of the research results is confirmed by the use of modern calculation methods. Theoretical studies were conducted on the basis of the laws of mathematical statistics. The scientific significance of the results obtained is characterized by the improvement of methods for determining the costs of the technological time of processing trains and the timing of cargo delivery based on the systematization of conditionally constant and random factors affecting the transportation process on railway transport.

The results of edge stresses and stress measurements in the neck of the rail in a curve of radius 380 m, obtained in the tests on the effects on the way the locomotive CKD6e-2108, freight gondola 12-9941 and 12-9920, on railway line Almaty - Chu. The dependences of the stresses in the edges of the soles and neck rail on the speed of the test vehicles. The possibility of a transition from stress to lateral forces.

In article the solution of a task of the organization of operational monitoring of elements of the rolling stock on the basis of the methods of statistical definition of quality which were widely used in the analysis of defects of the current production is considered. The problem is solved on the example of carrying out control and diagnostic operations by results of which realization the conclusion about technical condition of elements of the rolling stock becomes. The approach offered in article allows to consider a posteriori information and by that to optimize the volume of the carried-out works. The received results can be used at the solution of a complex of tasks of decrease in resource intensity of system of repair and the maintenance of the rolling stock.

Within the framework of the article, a study was made of the workplace of wheelchair washers for the purpose of determining the main occupational diseases and the causes of their occurrence. The theory of constructing rational modes of work and rest for working in the off-season in the open air is considered. The equation of integral index of cooling conditions is given. The risks associated with working in the cold are listed, as well as basic protection measures for workers, such as personal protective equipment and recommendations for restroom equipment. Within the framework of the article, the technological stages of manual washing of passenger carriages and a number of harmful production factors at the workplace of wheelchair washers are considered. In the process of analyzing the working conditions of the profession in question, a number of prof. diseases such as acute intoxication, dermatitis and dermatosis. The results of the conducted tests for the evaluation of the toxicity index and operational tests of samples of the detergent «Trans-Eco» with the aim of improving the working conditions of the passenger car wipers are presented.