Search results

The article describes trends in the technical development of fixing devices for containers, called a "fitting retainer". Containers have gradually conquered the transportation market in the USA, Europe and Asia. And each means of transport: road, marine and railway one needed devices to fix containers, because all participants of the transportation process are responsible for the safety of goods. In the period of the appearance of container transportations, commercial agreements between operators and transport companies played an important role, influencing the unification of overall dimensions and weights of containers and transported goods, which was a prerequisite to create fittings for containers and, as a result, fitting retainers for all means of transport. The domestic regulatory framework also required updating, monitoring a large number of flat wagon manufacturers and taking into account severe operating conditions of containers throughout the entire railway network. With the rapid development of the container transportation market on long routes from China to Europe and the transition to the technology of accelerated container train sets based on high-speed flat wagons, it becomes necessary to solve the issue of wind protection of empty containers and low loaded containers, taking into account the speed of up to 140 km/h. Well-known technical solutions from different manufacturers to fix containers in retainers of special shapes and with additional fixing through a retainer hole have been analyzed. An original technical solution of the fixing device is proposed, performed in the flat wagon opposite each fitting to install the container. By turning this device using man power, each corner of the container can be fixed to prevent empty containers from falling (tippling) from flat wagons when exposed to wind loads, which meets requirements of safety, operation and reliability of fixing the container in the flat wagon.

The article considers technical solutions to improve the quality of life support system in long-distance passenger trains (PVPDS), in particular in the water supply and ventilation systems, which ensure safe and comfortable passenger travel conditions. The quality of water in the coach is determined by the conditions of initial water filling at the intermediate stations, which can be adversely affected by the sanitary condition of the storage tank. Currently filters are installed in the ventilation system, efficiency of which is questionable in pandemic conditions. Scientific works and elaborations of native and foreign scientists, up-to-date concepts of organizing comfortable conditions in the PVPDS, as well as methodical and normative-reference materials on the given theme were used when writing the article. The effectiveness of the proposed method was confirmed in the course of experimental research, the results of which were used in the implementation of the investment project "Clean Water" of JSC "Russian Railways". Technical solutions have been proposed to improve the quality of life support systems using ozonization technology. Their realization will allow the life support system to operate in the water purification and disinfection mode and sterilization the air environment in the PVPDS. The condition for the efficient use is the availability of compressed air for the ejector operation in the mode of supplying the ozone-air mixture required for water and air cleaning and disinfection in the car. Ozonization is performed separately in the automatic mode. The ozone method for solving the problems of life support in coach cars is a perspective direction consider its generality and, therefore, ability of using it on the infrastructure objects for disinfection and sterilization of premises, reserved volumes and production capacities.

Electricity consumption for traction depends on a number of operational parameters, including the use of power of electric rolling stock. On Russian Railways there are flat areas of great extent, which operated the locomotives inefficient use of power and work modes with low energy performance. The aim of this work is to examine ways to improve the energy efficiency of passenger locomotives, such as the operation of electric rolling stock with rational values of power and number of axes for the modern passenger transport on the flat sections of the road long-haul and assess their energy performance. To achieve this goal was determined by the rational value of the power required for driving trains on this stretch of track with maximum speeds of 160 km/h, the calculations of the asynchronous traction motors obtained traction and power characteristics of electric locomotives with asynchronous traction drive, and a proposed comparison methodology, allowing to evaluate the difference of power consumption for traction of electric locomotives with asynchronous traction drive (with rational values of power and number of axes) currently operating a DC electric locomotive EP2K. On the basis of the conducted research it was concluded that there are reserves for improvement of energy efficiency of passenger locomotives on the flat sections of the road long-haul, such as operation of electric rolling stock with rational values of power and number of axes corresponding to the train weight, speed and track profile, which will significantly reduce the cost of electricity for traction of trains.

The article sets out the methodology of the study of a rigid mathematical model describing locomotive wheel and rail interaction, taking into account the hypothesis f. Carter. On the basis of the application of the theorem N.A. Tikhonova derived the differential equation for determining the rate of slippage of wheel pair on Rails. Determine the time dependence for the establishment of a process of kinematic slippage of wheel pair on Rails from the wheel speeds and locomotive, from inertial characteristics of trains and the wheel, as well as the coefficient of creep, annexed to the torque of wheel pair and the State of the surfaces of the Rails.

In article advanced techniques of laboratory and natural aerodynamic researches of a pantograph and its elements are considered. It is specified that carrying out modeling by means of computational fluid dynamics methods doesn't allow to replace pilot studies completely now. Need of correction of the received results because of influence of change of density of the environment during experimental studies locates. Density of the environment is offered to consider it as an integrated indicator. The main methods of measurement of density of the environment are given, their advantages and shortcomings are listed. The conclusion is drawn that it is most expedient to use ultrasonic measuring instruments to control of an indicator of density. The principle of operation of these measuring instruments is described. The example of use of an advanced technique of laboratory researches of the aerodynamic device for regulation of force of contact pressing of a current collector is given. Researches were conducted for device wing angles of rotation from zero to fifteen degrees with an interval of five degrees. After that aerodynamic characteristics of a wing of the aerodynamic device were under construction and comparison to results of modeling was carried out by means of a computing hydraulic gas dynamics them. The results received in OSTU laboratory well were correlated with results of computational fluid dynamics modeling that testified to adequacy of the applied technique.

The article deals with the issue of using electric power storage systems in railway transport. It is noted that they are used in renewable energy sources and on hybrid shunting diesel locomotives. The possibility of using electric power storage systems to improve the efficiency of using electric power for train traction is indicated. The introduction of electric energy storage systems in the traction power supply system is hampered by high capital costs and the need to strengthen several adjacent inter-substation zones at once. It is proposed to consider the possibility of creating a mobile energy storage system, all the equipment of which will be placed in containers installed on cargo platforms, which will allow such a system to be quickly moved. The purpose of introducing a mobile power storage system is to temporarily strengthen the traction power supply system during a planned overhaul or emergency repair of one of the tracks on double-track sections of the railway. In this case, there is a need for a batch pass of trains alternately in even and odd directions on the same track. The possibility of using a mobile energy storage system is considered on the example of a real section of the railway. For a given schedule of passing train packages, the dependence of the storage capacity taken off from time, the maximum power and the nominal effective energy intensity of the storage system are determined. An estimate of the electricity storage system cost is given. It is shown that more than 70 % of the total cost of the electricity storage system falls on the imported energy conversion subsystem. It is concluded that it is necessary to develop domestic converter subsystems.

In the article the author presents a logical-linguistic model, providing a sufficient depth and completeness of diagnostics with fulfillment of all required testing instructions and standards. Diagnostic features for every required testing were determined in order to build the suggested model. The results of a diagnostic model development were applied and successfully tested on various types of electrical sections

The analysis of the influence of the organization of the formation of United freight trains on the throughput capacity of railway sections has been carried out. The results of electrical calculations of the 3.0 kV dc power supply system of 3 sections of the Sverdlovsk and South Ural railways are presented when controlling the speed of trains from 50 km / h to 100 km / h with various locomotives while passing two single and one connected cargo trains using the system of contactless automatic voltage regulation in the contact network, allowing to assess the throughput capacity of the three sections. In the course of the calculations, the developed refinement method was applied using the correction current factors KIxx and KIst. Proved the need for their use in electrical calculations.

There is the way for increasing efficiency of recuperative braking, using an energy storage device on electrical locomotives of DC railway. This device must store a part of recuperative energy. In the article the approach was considered, which allows to find parameters of an energy storage device, this device must be placed on electrical locomotives of DC railway, a part of recuperative energy can be returned to electrical network.

There is a trouble that electrical energy of trains which have a recuperative braking uses partly for DC railway, because there are not different consumers of the electrical energy in this time. The method was offered, it allows to find optimal parameters of a stationary energy storage, which locates on a traction substation. This method can be used for designing and determination efficiency of an energy storage.

The article discusses the question of the innovation freight cars implementation in the context of their influence on forming and optimization of the locomotive park efficiency use indicators. Presents the main criteria of the innovation freight cars providing significant technical and economic effect for the traction rolling stock. Allocated the key factors influencing forming the criterion change functions of the cargo locomotives indicators of use efficiency. On the basis of the structured influence factors analysis can be developed the applied strategies of the locomotive park operational efficiency use.

This article presents the results of changes calculations in the energy efficiency indicators of the Moscow Central Ring, such as the specific consumption of electricity released for traction by trains of traction substation meters, specific recovery, technical losses of electricity in the traction power supply system when it is transferred to electric rolling stock, including technical recuperation energy loss, depending on various installation options of rectifier-inverter converters in traction substations part.

A method to an assessment of influence on the expenditure of electrical energy for traction of trains, parameters of graphic time-table in the conditions of using the regenerative braking is being considered in the article. The retrieval of version with the minimal using of energy is based on the modeling of graphic time-table by different train-to-train intervals in the conditions of burst-mode access’ organization on the railway section. By results of modeling it is proposed to represent the derived dependence by changing of electrical energy’s expenditure on parameters of graphic time-table in the form of analytic function of several variables n-order forthe following using by normative plotting of movement for the purpose of curtailing electrical energy’s expenditure for traction on the trains.

The article proposes methodology for assessing the power loss in motor thrust bearings, the nodes of box, traction gear transmission. Revealed dependence between the power losses, the diameter of the tire wheel pair and the speed characteristic of the wheel-motor block. The results can be used to assess the technical condition and energy efficiency of traction rolling stock of Railways.

The known approaches to the classification of factors affecting the energy consumption of the train are considered, and their main disadvantages are identified. The validity of existing classification methods and the completeness of accounting for factors affecting energy consumption are evaluated. It is shown that none of the known approaches to classification gives a complete picture of all the influencing factors and the degree of their influence on the energy consumption of the train, since it does not fully take into account the physical nature of the individual components and the overall power consumption for traction. Based on the analysis of the energy balance of the train articulated principles and criteria for the classification of factors influencing energy consumption, considers the interconversion of different forms of energy and describe their energy diagrams in the different modes of the train movement. The analysis made it possible to identify the factors that affect the power consumption of the train in all modes of movement, and evaluate them according to various criteria. A classification of factors affecting the train's electricity consumption is proposed, which allows us to justify the correct method of accounting for each factor, develop measures to reduce the influence of individual factors on energy consumption, improve the system of analysis, rationing and forecasting of electricity consumption for train traction, and competently solve other problems of electric traction energy.

The subject of research is the evaluation of the effectiveness of different modes of energy-optimal control of the movement of a freight train of a unified mass by AC freight electric locomotives of the Uz-El series with asynchronous electric motors on the flat section of Kokand - Andijan of the Uzbek railway. Purpose of the study: substantiation of the main performance indicators of electric traction locomotives, taking into account the given traffic schedule, using various options for the optimal mode of controlling the movement of a freight train with a unified train mass on a real flat section of the Uzbek railway. The methods and methodology of the research are the theoretical foundations of locomotive traction, the mathematical theory of optimal object control, as well as the C # programming language (C Sharp) with the development of mock-up applications in the Microsoft Visual Studio 12.0 programming environment.As a result of the study, energy-optimal curves, kinematic parameters of the movement of a freight train and parameters of the main indicators of the energy efficiency of the investigated electric locomotive for different options for traction calculation on the real flat section of Kokand - Andijan of the Uzbek railway were obtained. The obtained kinematic parameters of the movement of freight trains with a unified mass of the train and the parameters of the efficiency indicators for the use of the studied electric locomotives can be used in the Kokand locomotive depot, which will allow developing regime maps for driving freight trains by these electric locomotives, depending on the level of complexity of the track profile and various conditions for organizing rail transportation of goods.

In connection with the traceable global trend of increasing average speeds in railway transport, more and more often they are trying to exclude the intersection of railways and roads. However, in the Russian Federation, only 40 % of railway crossings are located near settlements or on busy roads, the construction of two-level interchanges at the remaining crossings is not economically profitable, and sometimes difficult due to climatic conditions. Therefore, a different approach is needed to prevent incidents and accidents at crossings. At the same time, the need for an individual construction of a security strategy for each object of the transport infrastructure should be taken into account. At present, in the existing information systems of the Ministry of Transport, the Ministry of Internal Affairs, as well as the owners of the railway infrastructure, a fairly large amount of statistical information has been accumulated on incidents and traffic accidents at railway crossings. But most often these data are used for certificates containing absolute values in each of the departments. At the same time, the relationships between these disparate sources of information are not comprehensively analyzed. Modern technologies for creating intelligent information systems based on existing large databases and tools such as machine learning, intelligent search, neural networks make it possible to build an expert system based on a specific set of rules that can analyze the situation at a particular crossing, assess the likelihood of emergency situations and suggest ways to prevent them. In addition, it is important to analyze not only the infrastructure, but also specific units of vehicles and the accident-free performance of the drivers driving them. This article discusses the prerequisites and technology for building a knowledge base of an intelligent system used to analyze the level of safety at railway crossings, which will allow us to combine currently information about the factors accumulated in various systems that affect traffic safety at crossings and based on the accumulation of knowledge give a forecast of the development of the situation at each specific object.

In the Russian Federation, most railway accidents take place at passive level crossings. The majority of scientific papers on the topic of crossings deal with the improvement of active level crossings operation. At present, there is no effective way to improve safety at passive level crossings. The subject of the study is passive level crossings. The aim of the paper is to develop a set of preventive measures to avoid accidents at passive level crossings. The article describes the cases of traffic accidents at level crossings of the West Siberian railway, studies the scheme of passive level crossings and offers a schematic diagram of the accident prevention system at passive level crossings. The work algorithm of the accident prevention system at passive level crossings and the algorithm of giving the locomotive a notification of an emergency situation at passive level crossings are presented. Using the existing coding scheme of the train protection system as a transmission line for information about an emergency situation at a level crossing allows simplifying significantly the scheme of the developed system. The paper also calculates the maximum permissible time of occupation of the crossing by motor vehicles and the time of coding change in the automatic locomotive signaling system of continuous type. The proposed accident prevention system at passive level crossings does not require additional equipment to organize the communication channel and is cost-neutral. Equipping passive level crossings with this system will improve train safety, reduce the number of accidents and increase the efficiency of the railway transport complex in general.

With the advent of new series of locomotives, the development of heavy freight trains, the increasing speeds of passenger trains, the introduction of innovative technical means and technologies, the degree of influence of various indicators on energy consumption is redistributed. The aim of the article is to develop a methodology for monitoring the efficiency of locomotives when changing the set of operational factors. This will make it possible to more accurately determine the estimated change in specific energy consumption, which in turn will increase the objectivity of the assessment of the causes of changes in the energy intensity of transport and will help to reduce energy losses.

In article the issues of electric power imbalance in train traction research are considered, including the method providing an estimation of the contribution of imbalance components to its total value with the possibility of their separation between the participants of the transportation process: the electrification and power supply service, the automatics and telemechanics service, the directorates of locomotive traction and motorized rolling stock. Described method allows in more detail to analyze the factors that affected the change in the components of imbalance and further develop organizational and technical measures to reduce it.

The paper considers the influence of the force characteristics of the damping apparatus on the value of the maximal longitudinal forces arising between the cars. Using the computer program MSC.ADAMS, we performed the simulation of shunting collisions of cars and train transient movement modes. The dependences of the maximal forces at cars' collision at various velocities on the shape of the elastic elements' force characteristics are determined. The operation of various shock dampers for the case of the train starting off electric braking and movement through the parts of the longitudinal track profile was estimated. It is shown that shock dampers with a rapidly growing line of load lead to the emergence and propagation of large shock forces along the train, while a slow growth of the force leads to their reduction due to the amplitude increase in elastic vibrations propagated along the train length . We propose to use high-energy-damping devices to reduce the longitudinal forces in the train, which are characterized by the force slew rate substantially depending on the compression velocity of the shock damper.

One of the ways to increase the capacity of railways is to use long-distance freight trains with a distributed traction system. In order to reduce the influence of the human factor, it is advisable to use automatic speed control systems on the locomotives of such trains, that take into account the transients occurring in the train. Determination of the longitudinal forces that occur in the train can be carried out by using either a reference mathematical model of the train, or pre-calculated dependencies of these forces on the parameters of the train movement. The second method allows you to simplify the structure and improve the performance of automatic control systems.

Example of the methods to evaluate conditions and reserve of transverse stability in CWR curves under abnormal track maintenance is discussed in the article. The author presents the results of the research of this method and also its positive effect is described.

The article deals with the issue of improving the energy efficiency of DC and AC electric locomotives operated at the enterprises of JSC “Russian Railways». The main goals and objectives of the development program and energy strategy of JSC «Russian Railways» are analyzed and briefly considered. In accordance with these tasks, the relevance of scientific research in the field of improving the energy efficiency of electric locomotives is substantiated. The current data on traction rolling stock, on modern traction resource management systems and on Russian and foreign scientific research in the field of energy efficiency are analyzed. As a result of the analysis, it was found that most of the studies are aimed at studying the influence of key operational factors on energy efficiency indicators, so, in this case, on the specific power consumption for train traction. However, the reverse question has been poorly studied - the selection of the train mass and the technical speed on the basis of a preliminary assessment of the specific power consumption for train traction by analyzing the statistical data of trips on a certain section of the railway. The purpose of this study is to assess the possibility and develop a method for determining the optimal values of the key parameters of the operation of electric freight locomotives in order to achieve maximum operational efficiency in relation to them according to the criterion of energy efficiency. Two models were created in the program «Complex of calculations of traction power supply» (CORTES) - for DC and AC electric locomotives, describing the dependence of the energy efficiency indicator (specific power consumption for train traction) on operational indicators, such as the train mass and the technical speed. The initial data for further modeling were obtained by modeling trips on a conditional site.

The article discusses the assessment of the impact of train schedule on the amount of electricity consumption for traction on sections of DC I-th profile type way. The proposed parameters of the train schedule, influencing the electricity consumption for traction on sections of DC I-th profile type way. The major scheduling options included statistical quantities and parameters characterizing the conditions of the batch passing trains, stop and solid thread schedules for truck-driving. Based on simulation modeling provided the main based on changes in the volume of electric energy for traction on the plot of the traction electric supply system when changing the parameters of the timetable. The dependences of the volume change of electrical energy for traction allow you to evaluate and determine the ranges of the parameters of the graph in which the variation of volume is minimal. in the considered ranges of the parameters of the train schedule, the amount of electricity for the areas of DC with the I-th profile type varies within 1 % with the constancy of other factors..