Modeling of electromagnetic fields of a three-phase traction network

The aim of the research presented in the article was to develop computer models for determining the electromagnetic fields (EMF) generated by three-phase 25 kV traction power supply systems (TPSS). In contrast to traditional single-phase TPSS, three-phase systems are electromagnetically balanced, provide symmetric loads of substations, increase voltages at current collectors of rolling stock, reduce asymmetry and non-sinusoidality in 110 - 220 kV supply networks. However, the issues of quantitative assessment of electromagnetic safety conditions in three-phase traction networks remain unstudied. To implement the formulated goal, we used the methods of modes and EMF simulation developed at the Irkutsk State University of Railway Transport, the distinctive feature of which is the use of phase coordinates; in this case, the models of TPSS elements are formed on the basis of lacelike equivalent networks. The simulation was carried out for three-phase TPSS schemes of different complexity, in which case the complex traction network was implemented by modifying the model of a real TPSS of one of the main railroads of Eastern Siberia. Simulation results indicated that compared to the typical TPSS 25 kV, the maximum electric field strength increases by 2.5 % in the three-phase system. The maximum value of the magnetic field strength decreases by 26 %. Similar indicators for average values are 2.6 and 19 %. The proposed methodology and the developed computer models can be used in the design of promising three-phase TPSS. In the conditions of power engineering digitization, the application of this technique in practice will allow to apply a scientifically validated approach to the analysis of electromagnetic safety conditions traction networks and to develop its improvement.