Contact network protection settings methodology dc in formed mode using short-cutter kzks-3,3

The purpose of the article is to consider the issue of calculating and selecting the settings for the operation of the short-circuit switch KZKS-3.3 when organizing the protection of a direct current contact network in emergency mode. The shorting circuit is measured by the voltage module. When the triggering conditions are met, it is the voltage module that collects the circuit to turn on the switching device of the short circuit. The important question is to choose the optimal installation location of the short-circuit switches and the voltage trip settings. The initial information necessary for the calculation of the settings is determined. The calculation procedure and equivalent circuits for the most common power supply circuits and sectioning of the contact network are given. For current protection of high-speed circuit-breaker feeders, contact formulas are given for determining the sensitivity zones. To select the optimal installation location of the short-circuit and select the voltage pick-up setting from the allowable range, a potential diagram of the contact network section is constructed. The analysis based on the potential diagram allows us to conclude that the organization of protection of the contact network in emergency mode using short circuits is effective.