Search results

In this paper we presented an option accounting compliance joints through mathematical modeling of prefabricated single-walled cylindrical geometric op-totropnyh shells on the basis of the contact boundary value problem of structural type.

In article examines the indicator of the energy efficiency of the locomotive as an indicator of the quality repair and use the power (energy efficiency) of the locomotive. This indicator is calculated for electric locomotives that have undergone current repair of MW-3 or repair of a similar volume, based on the predicted additional power losses in the limiting units and units of the locomotive, determined taking into account their technical parameters and characteristics obtained as a result of the repair. The application of the proposed indicator as an indicator the efficiency the use of electric locomotives will allow to influence the improvement of their technical condition through the management the quality of repairs and the use of power.

In article stages realization of complex systems non-contact thermal control of the main knots and systems locomotives are considered. The developed techniques of an assessment technical conditions sections refrigerators, electrical machines and the fuel equipment of a high pressure locomotives with use thermovision control method are presented.

Electricity consumption for traction depends on a number of operational parameters, including the use of power of electric rolling stock. Due to the fact that the Russian Railways are characterized by pronounced uneven sections of track, which, along with the hilly-mountain and mountain profile and has flat stretches long-haul locomotives when operating on different difficulty sections of the road have a different load and therefore operated with a different energy indicators. The purpose of this study was to evaluate the energy performance of the electric locomotives for driving passenger trains on flat terrain and the possible ways to increase their energy efficiency. To achieve this goal was the analysis of passenger electric locomotives EP2K on a flat site Novosibirsk-Omsk, West-Siberian railway, the mean values of the speeds and masses of passenger trains have been calculated for capacity, utilization factor, power rating and efficiency of electric locomotives. On the basis of the conducted research it was determined that the EP2K electric locomotives in the plains of the Railways a large extent operate in inefficient modes, due to their excess capacity, which is impossible to implement. In this regard, it was concluded that reserves of energy saving in those areas of Railways, where the operating conditions there is a clear underutilization of the capacity of the locomotives, a method of increasing the efficiency of their use through the use of a stepped power control and comparative evaluation of EP2K electric locomotives on all parts and traction motors.

The article is devoted to one of the urgent problems in the activities of JSC “RZD“- increasing the energy efficiency indicators of locomotives, namely, new generation locomotives running on liquefied natural gas (LNG) - GT1h series gas turbine locomotives. The results are presented for the analysis of typical diagrams of traction work at hauling trains by the gas turbine locomotive on the Surgut - Voinovka section of the Sverdlovsk Railway. Measures are proposed to reduce the specific consumption of the fuel used for hauling operations for various running duties of a gas turbine locomotive (traction mode, idling, transient modes). The justification and description are given for the selected technical solutions to reduce fuel consumption by the “gas turbine engine-traction generator” system during gas turbine locomotive operation in idle and traction modes. The results of tests of the gas turbine locomotive during idling and in traction mode using the proposed technical solutions are presented. The comparative analysis of the results obtained is carried out and the economic assessment of the effectiveness of the selected measures is given when the gas turbine locomotive is operating in idle and traction modes. A mathematical model is proposed for the electric traction drive and the automatic control system of the gas turbine locomotive, developed using the Matlab Simulink environment and designed to study the operation and optimization of electromagnetic processes occurring in the electric traction drive of the gas turbine locomotive in various modes of its operation. Based on the results of modeling the algorithms for the operation of the automatic control system (CAP) allowing to provide energy-optimal loading paths for the “gas turbine engine - traction generator” system in the entire power control range, the economic assessment of the effectiveness of the CAP algorithms is given. The economic assessment is presented for the implementation of a set of proposed measures to improve the energy efficiency of gas turbine locomotives.

The article presents a method for determining the thyristor shoulders of the rectifier-inverter converter (inverter) of an electric locomotive, on which the control pulses are passed. The method is based on the analysis of the duration of the current switching of the thyristors of the inverter shoulders and the rate of rise of the rectified current in the inverter circuit of the electric locomotive. The implementation of the method is carried out by refining the software of the microprocessor control system of the electric locomotive. The simulation of electromagnetic processes of rectifier inverter Converter of AC locomotive series 3es5k "Ermak" in the mode of regenerative braking during emergency operation is carried out on the example of missing control pulses on thyristor shoulders VS2 and VS7. As a result of modeling, data are obtained that confirm the effectiveness of the method proposed by the authors

System of preventive maintenance and maintenance of the operable condition of the traction rolling stock. The subject of a global study of failures of traction motors in the event of a breakdown on the territory of the service locomotive depot «Dalnevostochnoye» and «Primorskoye» for 2019. The purpose of the study is to determine the possible norms of overhaul runs for the considered node in order to achieve the optimal number of locomotive calls for unscheduled repairs. In the work, the correct law of distribution of traction motor (TED) failures, the determination of the Sturgess, Pearson coefficients and other methods of mathematical statistics and the theory of justification of systems. The article defines an element that limits the norms of overhaul runs of traction motors; the theoretical distribution of traction motor failures due to a decrease in the insulation resistance of its windings has been obtained. As part of the study, the optimization of the norms of overhaul runs was carried out according to the conditions for conducting maintenance regarding the traction motor. As a result of the analysis of the causes of failures, it was found that more cases of placing locomotives for unscheduled repairs occur in the first mileage interval of locomotives due to poor quality diagnostics at TR-1 upon measuring the resistance of the insulation windings. Most of the failures occurring in the first period of operation are not associated with a change in the reliability of the considered node. When considering two normal peaks of failures, falling on the operating time intervals 14-21 and 28-35, the necessity of optimizing the norms of overhaul runs is determined. When considering two normal peaks of failures, falling on the operating time intervals 14-21 and 28-35, the necessity of optimizing the norms of overhaul runs is determined. The practical significance of the study lies in the possibility of using the option of optimizing the norms of overhaul runs to adjust the norms of maintenance and repair periods within specific depots.

The analysis of the operational efficiency of freight cars circulating on the Russian railways, shows a lack of basic truck models 18-100 and its modifications and foreign counterparts. We propose a method for increasing the efficiency of the dynamic properties of the freight car with a cart, which has a new design of spring suspension, based on the principle of compensation of external disturbances and presented its advantages.

The way of diagnosing allowing without removal and dismantling of a nozzle on the working engine to define the chart of movement of a needle of a spray by means of the sensor of pressure, established in a cavity over a nozzle needle is offered, to estimate the valid corner of an advancing of injection of fuel and a technical condition of a nozzle of the diesel.

This article contains results of a preliminary study of the parameters of the laser triangulation sensor in the context of its application to control of a technical condition of details of the car. The main aim of the study is the experimental determination of the limits of applicability of the sensor to monitor the real sample detail of the new design freight car on the example of 18-9855 bogie parts. By the experimental methods where established the threshold limits of applicability of the given sensor, its properties and application features for dimensional control. Also where established limit angles of the distance measurement at the maximum setting of the speed sensor, the actual focal point of the transducer. The analysis of the obtained data allowed authors to make an optimal scheme of automated measurement machine of portal type for control of the size and shape of parts of the car. The results of the work is possible to use when designing automated systems and equipment for dimensional inspection of parts during manufacture, repair and maintenance of railroad cars and other vehicles.

A mathematical model describing the dynamics of mechanical oscillatory systems «rolling stock train -railway track» in the vertical longitudinal plane of symmetry. Is equivalent to converting the design scheme. Linearization of nonlinear characteristics in ways. A model of the «generalized» track to assess the existing shock pulses from the joints of rails.

The article describes a mathematical model of electro-mechanical devices wear contact pairs current collection of electric transport in conditions as close to real operating conditions. Synthesis of models made in two directions: model the mechanical load and model of electric current flow in sliding contact. The mathematical model also allows to take into account the thermal processes oc-curring in sliding contact by passing an electric current through a sliding contact. Are compared the results of calculations and experimental studies of wear of contact pairs of different materials. Experimental studies were performed on a dedicated test bench installation created in Omsk State Transport University. Relative error between calculation and experiment is not more than 6 %.

The main direction of decrease in operational costs on draft of trains is reduction of expenses by fuel and energy resources, decrease in repair expenses at the expense of increase of indicators of operational reliability of power installations of a diesel rolling stock. It is obvious that the solution of these problems, now when operational profitability of diesels and their reliability are on a limit for the developed service conditions and production of diesel locomotives, it is possible at the expense of application of alternative types of the fuel which use will allow to raise both reliability of a diesel rolling stock, and its profitability under operating conditions. One of such alternative fuels can, is either natural gas, or household oil gas, that is a butane and propane mix in various ratios. In the present article on the basis of mathematical models possible ecological and economic efficiency of use of мix types of fuel on the example of the diesel 2A - 5D49 is shown.

As a result of work statistical data bank of hardware and software complex «Bort» was researched. Methodology for TEM2 locomotive deiesel-generator plant parameters indicating while running hours transformation in integrated time space is suggested.

The state of industrial injuries during operation and repair technology of power supply devices in the power complex of Russian Railways, which confirms the relevance of the development and implementation of methods and technical means of protecting electrical personnel of the power complex of Russian Railways from electrical injury. The analysis of existing methods of maintenance, operation and repair technology of the contact network is carried out. An innovative solution is proposed in the field of electrical safety of personnel of the energy complex of JSC "Russian Railways" through the creation of a single high-precision coordinate space of power supply devices, implemented on the basis of mechanisms for using the global navigation satellite systems GLONASS / GPS.Considered the implementation of power supply and sectioning circuits and main electrical connections in the form of a digital model, which has a mathematical description of the geometric characteristics and spatial position of the contact network; feeding feeders; overhead lines: longitudinal power supply, automatic blocking, centralization and blocking, lines «two wires - rail», lighting; waveguide and other objects of power supply and electrification of railways. On the basis of modeling dangerous situations of electric shock, the electrical personnel of the power complex of JSC «Russian Railways» during the maintenance and repair of overhead contact network devices in all categories of work substantiated the effectiveness of the implementation of a spatial database in the form of a digital model of contact network devices. The use of a digital model of the overhead contact network will increase the level of electrical safety during maintenance and repair of overhead contact network devices and reduce the level of electrical injury to employees of the power complex of Russian Railways.

The article describes the priorities in the sphere tokosеma to improve traffic safety, the development of high-speed and high-speed traffic. To ensure the normal functioning of traffic and rail transport need uninterrupted transmission of electricity. Diagnosis of elements of contact network is one of the important task to prevent power system faults, including those that could lead to an emergency situation. The article deals with the built-in diagnostic system, how they work, an embodiment of their application.

Method of installation places and power choice of reactive power compensation devises in traction power supply system in condition of increase freight miles are introduced in this article. Approaches to definition of reactive power optimal criteria with reactive power compensation installation are denoted. Three criteria for estimation of reactive power compensation installation are offer to review. There is provided method of optimality assessment of this choice.

The mathematical model of traction drive Electric locomotive EP20 for research of dynamic processes in a mode of boxing is constructed. The natural frequencies and coefficients of the forms of the dynamic system are determined. The stability of the drive in relation to frictional self-oscillations is estimated. Dynamic loads in the drive elements at a single angular speed of wheel slip are calculated. The recommendations on increasing the dynamic qualities of the traction drive in the sliding mode are formulated.

This article touches upon the energy efficiency of train traction at Russian Railways. The relevance of scientific research in this issue has been substantiated. Requirements for organizational and technical measures implemented to improve the energy efficiency of train traction are given. The groups of factors that actually affect energy efficiency indicators have been identified. The creation of an intelligent system for monitoring and planning energy efficiency of train traction is proposed. The goals and objectives of creating such a system are formulated. The main features and classes of intelligent systems in the context of their application for solving the problems indicated in the article are described. The functional diagram of the proposed system and its description are given.

The aim of the work, the results of which are presented in this article, is to a study of the impact of physical and mechanical properties of rail steel on the parameters of the spectrum emission. The experimental results were obtained by method of atomic emission spectroscopy (AES) in argon. Performed quantitative analysis material of the rail steel and built a multi-dimensional graduations of the description of the spectral lines correlate with changes in the hardness of steel. The results can be used to extend the capabilities of devices atomic-emission spectral analysis

The paper considers a traction power supply system with a voltage of 27,5 kV AC. In the MATLAB-Simulink software environment, a calculation model has been developed that takes into account the parameters of the external power supply system, the train schedule and the current consumption of the electric traction load in the inter-substation zone. It is shown that when choosing the power of the compensating device according to the average value of the reactive power consumed by one train, its passage through the inter-substation zone with direct current causes the same average power losses in the wires of the catenary as in the absence of a compensating device. An increase in the number of trains simultaneously located in the inter-substation zone with the same power of the compensating device entails a decrease in power losses in the wires of the catenary relative to a similar situation without a compensating device, however, the reactive power is only partially compensated. In the calculations of compensating devices, it is proposed to take into account the real existing train schedule, based on the probabilistic assessment of which the average daily reactive power consumed by the electric rolling stock is determined. In this case, it is necessary to take into account the power losses in the catenary. The use of unregulated compensating devices is advisable in areas with a constantly present load. When choosing step devices for transverse capacitive compensation, it is proposed to calculate their power based on a probabilistic analysis of the train traffic schedule and current consumption in the inter-substation zone. When the probability of the appearance of a certain number of trains exceeding 50%, the most effective are compensating devices, the power of which is selected on the basis of the average power consumption of all trains without taking into account the time of no load in the inter-substation zone, as well as two-stage devices, the power of the first stage of which is selected according to the current consumption of the two most likely occurrences of the number of trains.

The article deals with the suitability of wave response method aptitude for traction engines turn-to-turn armature coil insulation testing and development of testing coil adequate model for further researching of physical processes occurring while testing. The method of wave response readout in armature coil reported is described in the article. The equivalent circuit of armature coil relating to wave response method is given. The wave responses got during physical model testing, simulating in MATLAB are shown. The real and simulating results analysis allows you to approve the proposed equivalent circuit adequacy. This equivalent circuit may be used for simulating of traction engines insulation fails relating to wave response method.

The expediency of introducing dynamic models of defect development into the practice of vibration diagnostics of rotor mechanical units is substantiated. It is shown that as a basis for the creation of models it is advisable to use empirical data. An example of a dynamic model of a small gear defect of a wheel-gear unit is given. The approximate amount of work on the creation of dynamic models is determined. Methods of realization of dynamic models of defects "in the big" are offered.

The drawbacks of the step-by-step automatic voltage control system under load AVC and the non-contact automatic voltage control system NAVC with the reactor switching device of the converter transformer used in the traction power supply are analyzed. The scheme of a thyristor-reactor switching device (TRSD) connected to the primary winding of the transformer is considered. A brief description of the operation of a transformer with TRSD and the procedure for calculating the symmetrical and asymmetrical external natural characteristics of a converter unit with TRSD are given. Based on the dependence of the energy indicators of the converter unit on the resistance of the uncontrolled reactor TRSD, a method is proposed for calculating the rational resistance of an uncontrolled reactor, where the power factor of the converter unit is taken as the criterion of rationality. The method includes two stages: the first is the calculation of the values of the power factor of the converter unit depending on the resistance of the uncontrolled reactor and the load current of the converter unit; the second is the determination of the average load current value of the power factor of the converter unit for each considered value of the resistance of the uncontrolled TRSD reactor and the determination of the rational for the considered external natural characteristics of the unit. In accordance with the presented methodology, the calculation of the minimum permissible and rational resistances of the uncontrolled reactor TRSD as part of a converter unit with a converter transformer TRDP-16000/10 was made. Taking into account the selected rational value of the resistance of the uncontrolled reactor TRSD, a calculation was made and the external natural characteristics of a converter unit with a TRSD and a converter transformer TRDP-16000/10 are presented. The performance check of the presented calculation method for solving the problem of choosing the rational resistance of an uncontrolled reactor was carried out on a physical model of a converter unit with a TRSD, with a 12-pulse rectifier unit, with a 30 kVA transformer and a linear primary voltage of 380 V. Comparison of experimental and calculated values showed a slight discrepancy, the permissible error was not exceeded. Determination of the resistance value of an uncontrolled reactor based on the developed methodology provides the highest values of the power factor of the converter unit.