Search results

Traffic safety of trains is a priority task of JSC «Russian Railways». In article the reasons of spontaneous operation of brakes of freight trains are investigated and their statistics depending on density of brake network of the train is given. Calculation of pressure in the camera under the equalization piston of the crane of the driver is made. Inertial characteristics of the equalization piston and its static characteristics are defined. Process of spontaneous operation of autobrakes on the basis of fundamental laws of a hydraulic gas dynamics is simulated.

The subject of this article is the pressure in the main reservoir of the locomotive. The purpose of the study is to obtain and analyze unique data on pressure reduction in the main reservoir of the locomotive. When carrying out train tests developed by the author of the train brake diagnostic system, pressure changes in the main reservoir of the locomotive were obtained depending on the driver's control effects in real time. This was achieved by installing a sensor measuring the pressure in the nutrient line of the locomotive and processing data using the software and hardware complex diagnostics system for the brake network of the train. In work methods of the mathematical analysis, a method of experiment, an analytical method are applied. As a result of the work, pressure reduction curves are described in accordance with the processes occurring in the main tanks of the locomotive during train operation. An explanation of the flow of pneumatic processes in accordance with the specifics of the braking equipment of the rolling stock of railways. An experiment was carried out to measure the density of the brake network of a train by a machinist and a system for diagnosing the brake network of a train, and the convergence of results was presented. Also, quantitative indicators of the measurement rate by the standard and proposed method are determined. The research results were applied to improve the methods and means of diagnosing the brake network of a train, modeling pneumatic processes of the train's brake system. Pressure reduction curves have their own gas-dynamic nature, which allows to determine the mode of operation of the braking system, as well as diagnose faults in the brake network of the train, such as shutting off end valves, leaks along the way.

Currently, in the brake system of operated cars, there is a problem of lack of brake pressure on the wheel, which is necessary for the movement of the train at a set speed in accordance with the regulatory documentation. This is due to the tendency to increase the mass of trains and the maximum load of cars with a constant tare weight, which requires an extended range of pressure control in the brake cylinder by an air distributor or auto mode, depending on the load of the car. To solve this problem, calculations were made of the braking coefficient of cars equipped with air distributors № 483, which showed that the freight car was not equipped with brakes to run as part of a train at a set speed. In the course of engineering studies, it turned out that increasing the spring rate of loaded and medium modes can increase the adjusting range of the air distributor and partially solve the problem of lack of brake pressure. Thus, it is proposed to recalculate the stiffness of the adjusting spring. Calculations of the rigidity of regular and proposed springs were made. The braking coefficient has been recalculated, taking into account the increased spring constant. As a result, this coefficient has increased, which makes it possible to remove speed limits. The proposed method for upgrading the air distributor can be carried out on all types of repairs, which facilitates the implementation process.

In article the design of an automatic pneumatic brake of the car with the braking accelerator is offered. Use of the developed accelerator of braking of an automatic pneumatic brake by freight cars allows to reduce a brake way of the train and to reduce longitudinally dynamic forces in the train when braking.