Search results

A variant of application of a contact compensated chain suspension with levers and lateral current collection for a three-phase traction power supply system (TSTE) is considered. Two different-phase contact suspensions are located on different sides of the track axis. The electric rolling stock must have two current collectors that press on the contact wire from the track axis in opposite directions. The description of the design of the contact suspension as a whole and the main components, in particular, the fastening of the rods, which makes it possible to provide a vertical zigzag and limit the transverse movement of the contact wire, is made. At points at the supports, the levers are connected to the consoles and have a knot to create angular rigidity. In addition, the rotation of these levers is limited towards the axis of the path and in the opposite direction. This prevents the possibility of lashing of different-phase contact wires. In accordance with this design, a mathematical model of this contact suspension was developed based on the finite element method, which provides calculation in statics and dynamics, taking into account the current collector. To describe the pantograph, a common three-mass model is used. Based on the analysis of the results obtained using this model, the influence of the design parameters of the suspension, cross wind and the speed of the pantograph movement on the quality of the current collection is determined, the limits of applicability of the suspension under consideration, depending on the value of these parameters, are established. It has been determined that, in contrast to a conventional contact suspension with a vertical current collection, for suspensions with a lateral current collection, a side wind has a significant effect on the quality of the current collection. It is the wind speed that is the main factor limiting the possibility of using a suspension with lateral current collection.

The aim of the research presented in the article was to develop computer models for determining the electromagnetic fields (EMF) generated by three-phase 25 kV traction power supply systems (TPSS). In contrast to traditional single-phase TPSS, three-phase systems are electromagnetically balanced, provide symmetric loads of substations, increase voltages at current collectors of rolling stock, reduce asymmetry and non-sinusoidality in 110 - 220 kV supply networks. However, the issues of quantitative assessment of electromagnetic safety conditions in three-phase traction networks remain unstudied. To implement the formulated goal, we used the methods of modes and EMF simulation developed at the Irkutsk State University of Railway Transport, the distinctive feature of which is the use of phase coordinates; in this case, the models of TPSS elements are formed on the basis of lacelike equivalent networks. The simulation was carried out for three-phase TPSS schemes of different complexity, in which case the complex traction network was implemented by modifying the model of a real TPSS of one of the main railroads of Eastern Siberia. Simulation results indicated that compared to the typical TPSS 25 kV, the maximum electric field strength increases by 2.5 % in the three-phase system. The maximum value of the magnetic field strength decreases by 26 %. Similar indicators for average values are 2.6 and 19 %. The proposed methodology and the developed computer models can be used in the design of promising three-phase TPSS. In the conditions of power engineering digitization, the application of this technique in practice will allow to apply a scientifically validated approach to the analysis of electromagnetic safety conditions traction networks and to develop its improvement.