Search results

The article discusses the specifics of the locomotive reliability indicators use in the Russian Railways. Examples of locomotive reliability indicators and the indicators used in the Russian Railways in the conclusion of service contracts, including under the life cycle contract are given. A method of transition from national standard to Russian Railways has been proposed. It is concluded that these procedures can be automated.

In paper results researches of interacting of devices of a current collection of monorail transport are resulted. Negative aftereffects of a current collection are analyzed: acoustical noise, radio interferences and light irradiation at a sparking, deterioration of contact elements.

The article proposes a method of using the mathematical apparatus of the theory of fuzzy sets in automation of the locomotives reliability management, because when writing algorithms there is a problem of transition from not fully formalized concepts of human communication to formalizing software. Examples of the fuzzy sets use in calculating the locomotives reliability are described. When calculating the reliability parameters manually, the volume of calculations does not allow you to move to more complex algorithms. When there are automated systems, it is necessary for each indicator of the transportation process, which affects its reliability, to set the function of belonging to a dangerous and normal value using the mathematical apparatus of the theory of fuzzy sets. Then the risk of a dangerous event will be assessed in probability, taking into account the logical claim to the risk.

The purpose of the study is to justify a rational method of organizing transportation, depending on the various parameters of packaged cargoes, transport containers, wagons and containers. The methods of investigation are based on the analysis and generalization of existing methods and methods of collecting the initial information, methods of its processing when choosing a rational method for the carriage of packaged goods. Practical significance of the research in the implementation of its results lies in the possibility of increasing the technical rate of loading of wagons and containers.

Solidifying transportation of goods by rail, namely, tank wagons is accompanied a number of difficulties. These include: lowering the temperature of the transported oil, accompanied by the growth of its viscosity, the inability to quickly discharge, change in performance of transported oil products, an increase in idle tank cars. The analysis of the cooling rate of the goods transported, depending on the size and thickness of the insulating layer. Introduced formulas show that the presence of the heat-insulating sheath is cylindrical vessel radius deviation from the optimum value. When this thermal insulation reduces considerably the heat transfer coefficient in the surrounding area and to accelerate the discharge process.

The results of experimental research on the diagnostic features of wheel-motor unit assemblies dependence on the speed of the wheel-pair. The parameters of the distribution of diagnostic features are given and a method of providing higher reliability of diagnostics of electric train WMU is provided

In this paper we presented an option accounting compliance joints through mathematical modeling of prefabricated single-walled cylindrical geometric op-totropnyh shells on the basis of the contact boundary value problem of structural type.

Principal directions for increase of locomotive operating efficiency are determined in the article based on statistical estimates as per data on the main domestic locomotive series. Work ratio is suggested as universal indicator. It is demonstrated that in addition to locomotives' reliability enhancement, increase of the trains' haulage management system efficiency is also a large reserve. It is proven that the number of locomotive units can be reduced at least by 2,000 thous. units.

In January 2022, a line of 2,000 cars formed at the Russian-Chinese border, waiting to be allowed to cross the state border [1]. The main reasons for the accumulation of a large number of vehicles at border checkpoints are restrictions on the movement of vehicles and cargo due to the difficult epidemiological situation, the lack of operational information interaction between transport organizations and regulatory authorities, insufficient capacity of the transport and terminal and logistics infrastructure. Consignors are switching to sending containers by rail, including the issue of piggyback transportation. In recent years, Russian Railways Holding has been actively developing a logistics service for the transportation of semi-trailers by rail, including in international traffic. Transportation of goods in piggybackers from the border provinces of the People's Republic of China towards the northeastern regions of Russia, where the transport infrastructure is poorly developed, difficult climatic conditions and irregular transport links, is an effective way to deliver goods to ensure an uninterrupted supply of the population of the region. As part of the strategy of the new Silk Road «One Belt - One Road» one can organize piggyback routes in the direction of Suifenhe - Grodekovo - Nizhny Bestyakh with the formation of the necessary cross-border terminal, logistics and transport infrastructure. The subject of this study is the analysis of the infrastructure of the Pogranichny railway checkpoint and the technological processes for organizing international piggyback transportation. The aim of the work is to develop a project for the infrastructure equipment of the terminal and logistics complex of the Pogranichny railway checkpoint for the organization of piggyback transportation. This paper uses theoretical research methods, including system analysis and information synthesis. By analyzing quantitative and qualitative indicators, operating technology and technical equipment of the Grodekovo station, the objects of the terminal and logistics infrastructure and issues that need to be addressed in the implementation of piggyback transportation were identified. The article presents the transport and technological schemes for the delivery of piggybackers, which are based on the functioning of terminal and logistics complexes, united by a single information space, and also considers the elements that affect the efficiency of organizing piggyback transportation. Transport industry experts predict a further increase in the volume of passage and transshipment of goods through the Far Eastern transport corridors, so the use of non-reloading transportation technologies and the implementation of the principles of «seamless» logistics will require reformatting the border terminal and logistics infrastructure with the introduction of digital services for the interaction of participants in international transportation.

The article is devoted to the improvement of the testing method of current collectors of electric rolling stock considering collision efforts from the overhead catenary. The article discusses the features of collision effects on pantographs of electric rolling stock at high speeds. An analysis of the existing methods for testing collision effects on pantographs in laboratory installations and in linear conditions has been carried out. The analysis is carried out and the drawbacks of the percussion pendulum installation for testing current collectors, described in GOST 32204-2013, are identified, and its characteristics are calculated. The design of a shock stand with smaller dimensions and expanded functionality is proposed, and its parameters and characteristics are calculated. When calculating the characteristics of the test bench, mathematical and computer modeling was applied using the MATLAB Simulink environment. The method of bench collision testing using accelerometers and high-speed video camera. It was established that the proposed test bench retains the full functionality of the test facility regulated by GOST, while having smaller dimensions and wider functionality.

The article considers the urgency of the problem of creating an on-board system of diagnosing the technical condition of railway car, the shortcomings of the existing diagnostic tools are indicated. Patent search of electric power sources for freight wagons has been carried out, their features have been determined. The author's design of the power supply device is proposed to diagnose the technical condition of railway car on the trip.

The article assesses the state of the market of transport and cargo services in Uzbekistan, considers the problem of scientific justification of the rational placement of cargo facilities in the country. Analysis of the problems of transport services has shown that freight traffic flows have spread out, negative trends have manifested themselves in the form of regular growth in the cost of fuel and energy resources, tightening of regulatory requirements, growth of customs duties, sanctions in the form of cancellation of previously introduced benefits, and more. However, such indicators of rail freight transportation as the range of container transportation and average travel time are stable in rail traffic, i. e. the diversification of the cargo base and the tendency to full capacity utilization take place. Separately, it should be noted that rail transportation interacts with other transport industries - automobile, air, sea, river and other modes of transport - as partners, not as competitors - multimodal freight transportation is widely developed, special logistics agencies operate to ensure the organization of uninterrupted work during freight transportation. Uzbekistan's railways need to be reformed, and possibly restructured. At least, private capital funds are already being attracted to the system of private carriage operation. The article describes the scientific methods of analysis and synthesis, classification, mathematical statistics used in the study. A roadmap of qualitative transformations for the reorganization of the transport and cargo industry has been proposed, which will bring positive results for the transport infrastructure as a whole.The results of the study will further reveal the capabilities of terminal networks capable of providing in a short time the delivery of large volumes of necessary cargo to domestic and foreign markets, the uninterrupted functioning of the necessary infrastructure for the placement of cargo facilities on the railway network. The object of the study is the state of transport infrastructure with a decisive role in trade.

In the article it is developed a model for the locomotives life cycle managing in their maintenance and repair using automated technical diagnostic systems. Based on statistical analysis of data on the operation of locomotives, the impact of the reliability of the locomotive and its maintenance and repair system on the efficiency of locomotives is theoretically justified. A method of analyzing the technical diagnostic systems effectiveness using the mathematical apparatus of information theory and of predicting the duration of maintenance and repair time with the dynamic use of accumulated statistics on the duration of previous repairs has been developed.

Low-density railway lines (LDRL) make up almost 1/5 (15,353 km) (18.2 %) of the total length of Railways of JSC "Russian Railways". Currently, the operation of LDRLs in countries of Europe and in Russia is very expensive. This is due to the large number of manual management operations and the excessive need for staff. The solution to the problem of efficiency of use of LDRL in the conditions of market economy is one of the priority tasks facing the transport industry. Despite the fact that LDRL are poorly loaded (on average 3.5 pairs of trains per day) and, therefore, unprofitable, their content is subject to almost the same requirements as for the mainlines, including reporting requirements. The stationmaster and staff of LDRL are overloaded the reporting documentation. This requires the performance of work on the revision of the technology, standards of service and operating procedures LDRL. The purpose of the study is to reduce costs for the main types of activities by changing the technology of maintenance and operation of LDRL. The subject of this study is the operation and maintenance of the LDRL network of JSC "Russian Railways". The methodology of the conducted research is based on the system analysis and scientific generalization of domestic and foreign experience in operation and maintenance of LDRL. The article highlights the technological features of operation of the LDRL. The classification of lines with low-intensity traffic has been developed and the criteria for their assignment to the proposed types have been determined. The peculiarities of the organization of movement of trains, passenger and freight work for the LDRL of various types are presented.

The article discusses the control systems for mechanical vibrations on the basis of improved modernized nonlinear inverse dynamics algorithms and its use for vibratory stands of technical diagnostics to diagnose mechanical products of railway transport systems.

The article deals with the organizational features of the Federal law of the Russian Federation on "transportation security compliance requirements to ensure transport security objects (buildings, structures), not related to transport infrastructure objects and located on land adjacent to transport infrastructure objects in the security zones of land transport. Systematized the activities required for the implementation of such transport facilities. In the work used techniques of systems analysis, comparative method, methods of theoretical knowledge (formalisation), obshhelogicheskie methods and techniques of research (analysis, synthesis, classification, the analogy).

The method of practical realization of decision of the special case of a transport task is examined. It allows to find optimal and the set amount of routes the nearest to it on the size of criterion of optimality. A method provides large flexibility in the decision of questions of planning of optimal organization of vehicular process at making, both strategic plans and operative plans in case of origin of situations of type "accident", "congestion", or other force-majeure circumstances.

The work is devoted to the consideration of the possibility of using composite materials with an aluminum matrix in the design of electric transport pantographs. Currently, there is a tendency to increase the speeds of electric transport. This fact requires reliable and high-quality current collection, which can be achieved by reducing the mass of the current collector design, including through the use of composite materials. The possibility of using composite materials in parts and assemblies of current collectors operating under conditions of increased current loads and at high speeds of movement and the mechanical characteristics of the traditional ones used in the carriage design and the composite materials proposed for use are analyzed. The design of a carriage of high-speed electric rolling stock has been developed, in which an aluminum matrix composite material was used as a structural material. Statistical modeling using the finite element method in the SOLIDWORKS Simulation software package was performed. Comparison of the strength characteristics of carriage assemblies made of traditional materials and aluminum matrix composite showed the possibility of reducing their weight in the case of composite use without reducing the strength of structural elements. The static characteristic of the carriage in which the composite material was used coincides with the static characteristic of the carriage made of traditional materials, which confirms the possibility of using an aluminum matrix composite without making significant changes to the carriage design. To evaluate the dynamic characteristics of the composite carriage and its effect on the dynamic characteristics of the pantograph, modeling was carried out using the methods of multibody modeling of SOLIDWORKS Motion. The obtained simulation results indicate an improvement in dynamic characteristics when using composite materials, which has a beneficial effect on the reliability and quality of current collection.

The article covers stability and accuracy for restoration of uneven sampled signals, using basis functions. The accuracy and stability are explored for different transfer system orders, period between basis functions and offset of the basis functions system against restored samples.

The analysis of wave processes in the system including electric transmission lines, traction substations, AC traction network and electriclocomotives is necessary to accurately assess to energy performance of its work. This system contains concentrated and distributed parameters, consequently the analysis of such a system is difficult and the rolling stock which is also a part of this system represents a dynamic load. The proposed mathematical model of the alternating current traction power supply system allows us to consider electromagnetic processes at its various points taking into account wave processes.

The need to apply various methods for predicting the technical condition of reinforced concrete supports of the contact network is currently a necessary condition for ensuring the safety of train traffic. Such a need arose due to the presence in operation of supports with extended service life, in the absence of a reduction in loads, without the presence of various kinds of redundancy. The article describes a method for predicting the technical state of the supports of the contact network. Solving the problem of exploitation, which consists in the fact that it is rather difficult to reveal the system of failures of the considered object of exploitation, under the influence of many factors. The probability of finding the contact network supports in a certain state is expressed through the statistical properties of the contact network supports, based on the change in the carrying capacity

The article considers the peculiarities of the transport network ports on the Baltic sea, the problems of optimization is to increase cargo turnover and the challenges associated with the modernization of the transport complex of Russia

The problems of optimization of organization of maintenance and repair of locomotives. The article presents new approaches for calculating the norms of spare parts and materials. Models of vehicle systems consisting of a fleet of operated locomotives are given, taking into account all conditions.

Transportation in tank cars of viscous liquid cargo (fuel oil, paraffins, industrial oils, cracking residues, etc.) is difficult with their solidification, accompanied by a sharp increase in viscosity. In fact, this leads to the need to warm up or partially warm up the transported oil product before unloading, usually carried out as a gravity discharge, in order to restore the fluidity of the delivered oil cargo. The process of unloading in this case with heating leads to a significant increase in the cost of transporting petroleum products, including the downtime of tank cars, and in general, a decrease in the turnover of rolling stock. According to the analysis carried out to determine the costs of the technological process of heating frozen petroleum products transported by rail, about 600 thousand tons of conventional fuel are spent per year, and the idle time of tank cars under unloading and subsequent cleaning of boilers from high-viscosity residues of oil cargo exceeds 1 million car-hours. The urgency of the issue of reducing the cost of railway transportation of viscous cargo is due to the intensive development of the Northern and Eastern regions of the Russian Federation. Important factors for transportation in these conditions are not only the negative average daily air temperature, but also long distances. The issue of reducing the cost of transportation of viscous petroleum products at low air temperatures is considered. Viscous petroleum products, when thickened, turn into a rheological liquid, which does not have a clear interface between the liquid and solid phases. The methods of transfer to the stratified state of hot fuel oil during its slow cooling and partial solidification with the formation of a heat-insulating layer of solidified fuel oil are applied. The positive effect is achieved by reducing the time and cost of thermal energy for unloading the delivered oil product by reducing the rate of its cooling during transportation. This, in turn, is achieved by suppressing the natural convection of the hot oil product on the cold walls of the boiler of the tank car in the first few hours after filling the tank. From the comparison of the experimental data and the calculation results, the values of the empirical coefficients of the equation for the heat transfer coefficient of liquid petroleum products are selected. The standard deviation of the absolute temperature of the liquid petroleum product was 8 %.

A significant share of JSCo «Russian Railways» expenses falls on the purchase of diesel fuel and electric power for train traction. In this connection, the task of ensuring rational consumption of energy resources acquires special importance. Its solution is impossible without a well-functioning system for planning and forecasting the energy efficiency of locomotives. The article proposes a method for predicting specific energy consumption (SEC) for train traction, based on determining predicted values of transportation work and fuel and energy resources consumption by extrapolating time series, which consists in spreading the trends in changes in the values established in the past to the future period. A distinctive features of the developed method is the determination of seasonality indices and consideration of the rhythm of changes in the indicators. In cases where the forecast period includes months of the first or fourth quarters, a formula is proposed for determining the forecast value of the SEC, taking into account the influence of the atmospheric air temperature. The calculations performed showed that the application of the proposed method for structural divisions with different volume and nature of transportation work and the level of the SEC ensures a sufficiently high accuracy of train traction energy cost forecasting. The method is included in the Methodology for Analysis and Prediction of Fuel and Energy Resources Consumption for Traction of Trains developed by OmGUPS and implemented in the railroad network of the Russian Federation.