Search results

The article contains the main provisions of the methodology for determining the indicators of electric locomotives energy efficiency. The results of indicators calculations for electric locomotives of series 3ES5K, EP2K and 2ES6 are presented with reference to the current sections of railways. The proposed approach can be used to establish the level of energy efficiency of various series of electric rolling stock and their objective comparison when operating at different sites with trains of various masses with the aim of further creating an automated system for optimizing the use of traction resources of JSCo Russian Railways.

The article outlines methodological approaches to assessing the effectiveness of measures aimed at improving the efficiency of recuperative braking application and the use of energy recovery. An example of calculating the energy efficiency of recuperation on a double-track section of direct current is given. The analysis of the influence of changes in such parameters of the section as technical and district speed of freight trains on the efficiency of energy recovery. The article presents the results of estimating the energy recovery components that form the economic efficiency of recuperation, and describes the approaches to predicting the change in this efficiency, depending on the change in the influencing factors.

An approach to the evaluation the actual energy savings achieved when implementing service contracts energy, based on the development of mathematical models of power consumption, taking into account the impact of production and climatic factors. An example of the calculation of the ac-tual efficiency of introduction of energy-saving devices at the Sverdlovsk railway is presented

Paper is devoted to the development of an improved algorithm for calculating the traction power supply system for further practical implementation in order to improve the accuracy of calculations of the traction power supply system by combining traction and electrical calculations with considering the current train situation. The relevance of the task is due to the need to improve the accuracy of calculations of throughput and carrying capacity under the conditions of power supply devices with considering the criteria for energy efficiency of the transportation process. The available solutions to this problem in the form of ready-made software systems and algorithms are considered. A numerical experiment was carried out for the DC section in the program "Complex of calculations for traction power supply", which showed that the relative error that determines the convergence of traction and electrical calculations is from 1.6 % to 5.1 %. The main reason for the discrepancy is the insufficiently correct calculation of the voltage at the current collector of the electric rolling stock. An improved algorithm for calculating the traction power supply system is proposed. The distinguishing feature of this algorithm is the implementation of a clarifying full traction calculation before compiling instant schemes and instant electric and traction calculations. As a result of the research, a general algorithm for joint traction and electrical calculations with considering the parameters of railway sections and the current training situation has been developed,. A conclusion about the advantages of the proposed algorithm and promising directions for further research is made.

The article deals with the introduction of a twenty - four pulse rectifiers with various rectification circuits on direct current traction substations. The results of the operation of a twenty-four-pulse rectifier installed at one of the traction substations prove the expediency of using such a converter. The variants of the existing equipment modernization, which is a part of the six- and twelve-pulse rectifiers in order to use it in the creation of twenty-four-pulse rectifiers, as well as the requirements for the creation of such rectifiers in industrial design are given.

In the article the questions of increase of efficiency of structural subdivisions, members of the directorates of the West Siberian railway - branch of JSC "Russian Railways", such as infrastructure Directorate, Directorate railcar rolling stock and the Directorate of buildings and structures. The aim of this work is to identify structural units with the lowest energy efficiency indicators. This requires estimation of an indicator such as relative energy efficiency over a period of time equal to one calendar year, based on data of annual consumption of electric energy and annual volume of enterprise work. The article also outlines the main provisions of the concept analysis and monitoring the energy efficiency indicators of stationary objects of the railway transport, which will identify inefficient structural subdivisions with the use of control actions to reduce irrational consumption of energy resources. Calculation of the relative energy efficiency is one of the stages of this concept. The result is a received charts of the relative energy efficiency of structural subdivisions of the West Siberian railway which allows to make a comparison of this indicator. According to the results of comparison found that 10 of the 65 structural units have a low indicator of relative energy efficiency. This suggests the need for careful study the reasons of the low values of energy efficiency in these structural subdivisions and proposals the measures to eliminate this situation. The method and sequence of these activities proposes into the third and fourth stages of the concept. The establishment and subsequent application of a unified approach to the analysis and monitoring of energy efficiency indicators for all departments will increase the energy efficiency of the territorial branches of JSC "Russian Railways" and the holding company as whole.

Currently in Russia there is an active development of industry, which requires a large amount of energy resources. At the same time, there are several obstacles in the way of providing all consumers with the required volume and, most importantly, the quality of energy. First of all, this is due to the technical condition of the equipment of both consumers and energy producers and the absence of programs for the implementation of measures aimed at increasing energy efficiency. Today, a full-fledged assessment of the energy efficiency of the production of many enterprises is difficult due to the lack of a single physical and mathematical apparatus and a universal criterial assessment of the energy efficiency of enterprises. This leads to the fact that a correct assessment of energy efficiency indicators and energy saving potential is not fully possible. Most of the existing methods for assessing energy efficiency indicators are limited and allow assessing only one or several indicators, do not provide for linking all indicators into a single whole. In addition, there is no criterion for assessing energy efficiency that is uniform for all components of heat supply systems. A promising direction of modern research in the field of heat supply systems is the improvement of methods for assessing the energy efficiency of heat supply systems through the use of a physically and mathematically substantiated criterion for the energy efficiency of the heat supply system of industrial enterprises and the creation of unified methods and an algorithm for assessing the indicators of the energy efficiency of heat supply systems of various compositions and devices. Special attention is paid to assessing the reliability of the initial data. This assessment is possible using the correlation method. In practice, correlation and regression analysis is widely used to predict the consumption of heat energy. This approach can also be used when assessing the reliability of the initial data using the Chaddock scale. In the course of the research, methods of constructive and verification calculations, experimental and analytical research, the method of correlation analysis, and statistical research methods were used. As a result of the research, a unified, generalized methodology for assessing the indicators of the energy efficiency of the heat supply system of the enterprise has been developed. We created the algorithm given a comprehensive assessment of the energy efficiency of the heat supply system of an industrial enterprise and to assess the potential for energy saving.

When developing a set of organizational and technical energy saving measures, it is necessary to correctly assess the feasibility of using certain measures not only in terms of return on investment, but also based on the technological process of the enterprise. It is necessary to take into account not only the current parameters of the installed equipment, but also other, important factors: the degree of equipment utilization during the year, since this parameter in the equipment during the inter-heating period, as a rule, is significantly less than in the heating period. It should also take into account the prospects for the development of the enterprise. Many modern energy-saving technologies have a long payback period, and this is caused not so much by a small energy-saving effect as by the low popularity and low demand for these technologies, which leads to high purchase and maintenance costs. With the right choice and operation of equipment of this kind, an enterprise can significantly reduce the cost of its products and increase its competitiveness in the market. The article discusses the issues of approaches to assessing the potential of energy saving and the choice of priority areas for increasing the energy efficiency of heat supply systems of industrial enterprises. The described energy saving measures are applicable to the majority of existing heat supply systems and are the most common. The given procedures for assessing the technical and economic effect allow us to pre-evaluate the significance and feasibility of applying a particular event.