Development of an automated system of resource-saving control of an electric heating system for drying insulation of traction electric machines

Traction electric machines (TEM) of locomotives operating at the Eastern circulation range have insufficient reliability, mainly in terms of insulation breakdown, being one of the most important problems in the operation of electric rolling stock. This article discusses the method of drying wetted insulation by mobile and stationary electric heaters, which are used in the process of repairing traction electric motors of locomotives and electric trains. The problem of operating these installations is their low energy efficiency. With a constant power supply, the heating elements and the fan of the electric heater remain on during the entire drying process of the insulation, which leads to significant energy consumption, and the drying process is recorded by conducting paper workflow, recording the technical condition of the TU-152 locomotive in the log. To eliminate these shortcomings, the authors propose the modernization of the electric heating installation by introducing into it a microprocessor-based system for automatic regulation of the drying process with cloud storage technology. The article presents a block diagram of the proposed automated system, which will implement the three-cycle amplitude-latitude-discontinuous method of energy supply proposed at the FGBOU VO "IrGUPS" in the process of drying the wet insulation of the TED. Currently, cloud storage technologies have found their application in companies of various kinds of activity, it is being actively improved due to the constant increase in the amount of information that needs to be stored or transferred, and in addition, the user can have access to it from anywhere in the world. In recent years, the world has noticeably increased interest in the application of this technology in railway transport. As part of the modernization of the installation, it becomes possible to remotely control its operation, as well as store and process the information received on the drying process of wetted insulation.